49
VQT1T64
Recording
(Basic) 4Zoom in/out function
The maximum optical zoom ratio is 12k.
¬Rotate the mode dial to select .
≥If you take your finger off the zoom lever during
zoom operation, the operation sound may be
recorded. When returning the zoom lever to
the original position, move it quietly.
≥When the zoom magnification is 12k, the
subjects are focused at about 1.2 m (3.9 feet)
or more.
≥When the zoom magnification is 1k, this unit
can focus on a subject approx. 4 cm (1.6q)
away from the lens. (Macro function)
≥If the zoom lever is pushed to the end, you can
zoom from 1k up to 12k in as fast as approx.
1.9 seconds. (The zoom speed does not vary
when operating with the remote control.) When
the zoom speed is high, the subject may not be
focused easily.
≥Zoom can also be operated using the multi
manual ring. (l70)
If the zoom magnification exceeds 12k, then the
digital zoom function will be activated. The
maximum magnification provided by the digital
zoom can be selected.
Select the menu. (l29)
[OFF]: Optical zoom only (Up to 12k)
[30k]: Up to 30k
[700k]: Up to 700k
≥If [30k] or [700k] is selected, the digital zoom
range is displayed in blue while zooming.
≥The larger the digital zoom magnification, the
more the image quality is degraded.
Zoom lever
T side:
Close-up recording (zoom in)
W side:
Wide-angle recording (zoom out)
≥The zoom speed varies depending on the
range over which the zoom lever is moved.
WT
VOL
1
W
T
1
W
T
W
T
W
T
121212
6
W
T
6
W
T
[BASIC] # [D.ZOOM] # desired setting
HDCSD100P-VQT1T64_ENG.book 49 ページ ２００８年７月１４日 月曜日 午後８時２分