Intelligent scene selection
(Extracting parts recorded clearly to play back)
Motion pictures are played back after excepting some parts that may not have been recorded clearly such as image shaking or
1 Select 
(Intelligent scene selection), then press the cursor button.
2 Select the scene to be played back, then press the cursor button.
≥Select 
(All scenes) and press the cursor button to return to the playback of all scenes.
≥Select 
(By date) and press the cursor button to activate the Intelligent scene selection on the selected date. (l 77)
To return to the Intelligent scene selection for
all scenes, select 
(All scenes) with the cursor button and then press the cursor button.
≥The following motion pictures are skipped jWhen motion pictures are recorded while
moving the unit quickly jWhen the unit shakes
jWhen the image contrast is too strong such as when using backlight
jWhen scenes are too dark
jWhen you record with the unit tilted, upside down, or pointing down
jWhen the subject is out of focus
≥Up to 9 sections can be skipped for a single scene.
≥When motion pictures are skipped, the image stops momentarily.
≥The position of sections to be skipped may vary depending on the type of recording, with some having no skipped parts.
78
≥Divided scene will not be skipped.
≥Playing back all the scenes returns if the power is turned off or the mode dial is operated.
≥For data that are edited with the easy editing function of HD Writer 2.6E, the Intelligent scene selection is disabled.
≥Deletion of scenes cannot be done during the Intelligent scene selection.
Repeat playback
Playback of the first scene starts after playback of the last scene finishes.
Select the menu. (l 29)
[VIDEO SETUP] # [REPEAT PLAY] # [ON]
The [
] indication appears on the thumbnail and full screen views.
≥All the scenes on the SD card are played back repeatedly. (When the play mode is set to
, all the scenes on the selected date are played back repeatedly.)
≥Set [REPEAT PLAY] to [OFF] to cancel the repeat playback function.
Resuming the previous playback
If playback of a scene was stopped halfway, the playback can be resumed from where it was stopped.
Select the menu. (l 29)
[VIDEO SETUP] # [RESUME PLAY] # [ON]
If playback of a motion picture is stopped, [ 
] appears on the thumbnail view of the stopped scene.
≥This function’s default setting is [ON].
≥Set [RESUME PLAY] to [OFF] to cancel the resume playback function.
≥The memorized resume position is cleared if you turn off the power or operate the mode dial.
VQT1T64
