Panasonic HDC-SD100P Setting date and time, Select the menu. l, ¬ Rotate the mode dial to select

Setup 5 Setting date and time

When the unit is turned on for the first time, a message asking you to set the date and time will appear. Select [YES] and perform steps 2 to 3 below to set the date and time.

¬Rotate the mode dial to select .

1 Select the menu. (l 29)

[SETUP] # [CLOCK SET] # [YES]

2 Select the date or time to be set, then set the desired value with the cursor button.

≥The year will change as follows: 2000, 2001, ..., 2039, 2000, ...

≥The 12-hour system is used to display the time.

≥[ ] appears on the right top of the screen when [SET WORLD TIME] (l 34) is set to

[HOME], while [ ] appears when it is set to [DESTINATION].

3 Press the cursor button to enter the selection.

≥The clock function starts at [00] seconds when the cursor button is pressed.

Changing the date and time display mode Select the menu. (l 29)

[SETUP] # [DATE/TIME] # desired display style

≥You can also show or change the date and time display by repeatedly pressing the DATE/ TIME button on the remote control.

[DATE][D/T]

NOV 15 2008 NOV 15 2008 12:34PM

[OFF]

Changing the date format

Select the menu. (l 29)

[SETUP] # [DATE FORMAT] # desired display style

Display style	Screen display
[Y/M/D]	2008. 11. 15
[M/D/Y]	NOV 15 2008
[D/M/Y]	15. 11. 2008

≥To set daylight saving time, select the daylight saving time in [HOME] for [SET WORLD TIME] after setting the clock.

≥The date and time function is driven by a built- in lithium battery.

≥If the time display becomes [- -], the built-in lithium battery needs to be charged. Use the following steps to charge the battery.

To recharge the built-in lithium battery

≥Connect the AC adaptor or attach the battery to this unit, and the built-in lithium battery will be recharged. Leave the unit as it is for approx. 24 hours and the battery will maintain the date and time for approx. 6 months. (The battery is still being recharged even if the mode dial is set to OFF.)

33

VQT1T64