60
VQT1T64
HD hi-speed burst
shooting
72 still pictures are recorded at a rate of 24 per second.
Use this function to record an object with fast movement.
≥The Intelligent auto mode is set to [OFF]. (l51)
1Select the menu. (l29)
[RECORD SETUP] # [HI-SPEED BURST] # [ON]
2Press the button.
≥Up to 72 still pictures can be taken in burst mode. ([ ] flashes in
red during recording.)
3Select the setting to save with the cursor
button and press the cursor button.
[REC ALL]:
All pictures are stored.
[SELECT]:
Pictures in the selected range are stored.
[DEL ALL]:
No picture is stored.
≥Select the thumbnail on the right bottom of the screen with the
cursor button and move the cursor button right to display the next
page.
4(Only when the [SELECT] is selected)
Select the range of pictures that will be stored.
AStart point*
BFinish point
* Only select the picture for start point if only 1 picture is to be
stored.
Confirmation message is displayed when [REC] is selected and the
cursor button is pressed after selecting the start point and the finish
point.
Select [YES] and press the cursor button.
Function Effect/Setting method
HDCSD100P-VQT1T64_ENG.book 60 ページ 2008年7月���4日 月曜日 午後8時2分