Manuals / Brands / Photography / Camcorder / Panasonic / Photography / Camcorder

Panasonic HDC-SD100P, HDC-SD100PC operating instructions 1, 2 3, 4

1 156

Download 156 pages, 28.21 Mb

40

VQT1T64

This unit will resume recording pause mode

about 0.6 seconds after the LCD monitor is

reopened.

≥When in quick start standby mode about

60% of the power used in recording pause

mode is being consumed, so the recording

time will be reduced.

¬Rotate the mode dial to select .

1Set the LCD/EVF select switch to

LCD. (l35)

2Select the menu. (l29)

3Close the LCD monitor while the

mode dial is set to .

The status indicator A flashes green and the unit

goes into quick start standby mode.

≥The lens cover does not close.

4Open the LCD monitor.

The status indicator A lights red and the unit is

put into recording pause approx. 0.6 seconds

after it is turned on.

≥Set [QUICK START] to [OFF] to cancel the

quick start mode.

≥Quick start standby mode is canceled if

jabout 5 minutes has elapsed

jmode dial is set to

junit is turned off

≥Time for quick start will be more than 0.6

seconds slower in the following conditions.

jWhen 24p digital cinema is used

jWhen the unit is exposed to vibration or

shock

≥In the quick start mode, it may take some time

for automatic white balance to adjust, if the

scene being recorded has a light source

different from the scene last recorded. (When

the MagicPix function is used, however, the

white balance of the scene last recorded is

retained.)

≥In the quick start mode, the zoom

magnification becomes 1k and the picture size

may differ from what it was before quick start

standby mode.

≥If [POWER SAVE] (l31) is set to

[5 MINUTES] and the unit automatically goes

into quick start standby mode, close the LCD

monitor and then open it again.

The unit is put into recording pause approx.

1.9 seconds when the mode dial is set to

from OFF.

≥Start time will not shorten if there is no SD card

inserted.

¬Rotate the mode dial to select .

Select the menu. (l29)

≥This function’s default setting is [ON].

≥Set [QUICK POWERON] to [OFF] to cancel

the quick power on.

≥In the quick power on mode, the zoom

magnification becomes 1k and the picture size

may differ from what it was before turning

power off.

Quick start

[SETUP] # [QUICK START] # [ON]

Quick power on

[SETUP] # [QUICK POWER ON] # [ON]

HDCSD100P-VQT1T64_ENG.book 40 ページ２００８年７月１４日　月曜日　午後８時２分

Contents

Main High Definition Video Camera Operating Instructions Things You Should Know Safety Precautions WARNING: CAUTION! Date of Purchase Dealer Purchased From Dealer Address Dealer Phone No. Model No. Serial No. CAUTION Page Batteries Warni ng U.S.A./CANADA CONSUMERS: ATTENTION: AC adaptor IMPORTANT SAFETY INSTRUCTIONS Precautions Indemnity concerning recording content WARNING CAUTION IMPORTANT Carefully observe copyright laws Cards that you can use with this unit For the purposes of these operating instructions Licenses Contents Preparation Before using Setup Recording Playback Playback Editing With a TV Backup Accessories Features Very clear high definition pictures High definition images What is AVCHD? Compatibility with other products Quick Guide Charging the battery Inserting the battery How to turn on the power Inserting/removing an SD card Language selection Help mode To exit the Help mode Recording motion pictures Recording still pictures Motion picture playback Still picture playback Preparation handling 21 22 23 24 25 26 27 28 29 30 Page 43 44 Remote control CAUTION Install a button-type battery (supplied) Remote control usable range About batteries that you can use with this unit 1 2 Charging the battery Charging lamp [CHARGE] A Install the battery by inserting it in the direction shown in the figure. Inserting/removing the battery Removing the battery CAUTION Charging and recording time Battery capacity indication 1 2 3 Connecting to the AC outlet DC IN Cards that you can use with this unit 1 2 sliding the OPEN lever B. 3 4 (Turning the unit on/off) Turn on the power by turning the mode dial to or while pressing the lock release button A. To turn off the power To turn on the power To turn off the power 1 2 3 4 5 1 2 Recording mode Language selection Menu list Page Playback mode ( 2 then set the desired value with 3 the selection. 2 Select [HOME] and press the 3 Select your home region and enter the selection with the 4 viewfinder 2 button and press the cursor 3 LCD/EVF select switch Adjusting the viewfinder field of view Recording showing the contents to a partner Recording Basic camera positioning About auto mode Auto Ground-Directional Standby (AGS) 1 LCD. (l35) 2 3 mode dial is set to . 4 1 2 3 4 About the compatibility of the recorded motion pictures Screen indications in the recording mode HG When motion picture recording stops suddenly Recording modes/approximate recordable time 1 2 button to start recording. PRE-REC This prevents you from missing a shot. 1 . 2 LCD or EVF. (l35) 3 4 About the screen indications when the button is pressed To record still pictures clearly About the focus indication About the focusing area Number of recordable pictures Zoom lever WT VOL Digital zoom function function Optical image stabilizer button Set the mode dial to , and set the AUTO/MANUAL switch to AUTO. (l39) Intelligent auto button operation icons 1 icons will be displayed on the screen. 2 Select an icon with the cursor Fade Backlight compensation Help mode Self-timer This is for recording still pictures using the timer. Intelligent contrast control Automatic face detection MagicPix Tele macro Headphone volume adjustment Page menus Guide line 24p digital cinema Microphone setup HD hi-speed burst shooting 2 3 button and press the cursor button. 4 Select the range of pictures that will be stored. Built-in flash Red eye reduction Shutter sound Auto slow shutter Digital cinema color Page setting the menu Set the AUTO/MANUAL switch to MANUAL. Scene mode Wind noise reduction 2 the microphone input level. 3 and then press the MENU button to finish the setting. Microphone level 2 button and press the cursor 3 Picture adjustment Zebra Luminance Histogram the multi manual ring Set the AUTO/MANUAL switch to MANUAL. (l64) Zoom by rotating the ring. 1 2 ring. Zoom operation Manual focus adjustment 1 and select [WHITE BALANCE] by rotating the ring. (l69) 2 3 rotating the ring. 1 and select [SHUTTER SPEED] or [IRIS] by rotating the ring. (l69) 2 3 4 Playback 1 2 3 4 with the cursor button. Speaker/Headphone volume adjustment Fast forward/rewind playback Skip playback (to the start of a scene) Slow-motion playback Frame-by-frame playback Motion picture compatibility 1 save as a still picture during playback. 2 1 2 3 back, then press the cursor Creating still picture from motion picture 1 selection), then press the cursor 2 Select the scene to be played back, Intelligent scene selection 1 . 2 playback) with the cursor button. 3 4 with the cursor button. Changing the interval of playback for the slide show Still picture compatibility 1 2 3 played back. Playing back still pictures by date 1 2 3 4 Page Select [ ] (motion picture playback) while the mode dial is set to . (l74) 2 3 point. 4 complete dividing. pictures 2 be protected and then press the Select [ ] (still picture playback) while the mode dial is set to . (l79) What is DPOF? 3 Select the menu. (l29) When the confirmation message appears, Formatting SD card information display your TV 1 2 3 If the image or audio from this unit does not appear on the TV To watch images with a 16:9 aspect ratio on a regular TV (4:3) To display the on-screen information on the TV Connecting with a HDMI mini cable Listening in 5.1 channel sound Connecting with the component cable Connecting with the AV cable (HDAVI Control) Set the mode dial to . Playback operation with the remote control for the TV Other linked operations Backup 96 With other products copy to/play back a disc Preparing for copying/playing back We recommend using Panasonic DVD burner VW-BN1. About discs that can be used for copying Page 1 Copying to discs burner to prepare for copying. (l96) 2 3 5 Select [NEXT] and press the Press the DISC COPY button. 6 Important Notice About the approximate time it takes for copying to a disc Page 1 Playing back the copied disc 2 3 Formatting discs 2 Auto protect Displaying disc information Managing the copied disc (Formatting, Auto protect, Displaying disc information) video device 1 2 3 Change the video input on the video device and TV that this unit is connected to. 1 2 4 3 5 display the PictBridge menus. 6 [DATE PRINT]. 7 With a PC Page To use the HD Writer 2.6E Important Notice End User License Agreement Operating environment for HD Writer 2.6E for HDC Operating environment for the card reader function (mass storage) 1 2 3 4 5 6 1 2 1 adaptor. 2 3 4 About the PC display AVCHD Removable Disk AVCHDTN BDMV DCIM 100CDPFQ Reading the operating instructions of the software applications 1 2 3 4 Others Recording indications 1h30m / 1 R 1h20m 100 OPEN 0dB 0h00m00s MF NOV 1 2008 12:34PM Playback indications PC connection indications Confirmatory indications Confirmatory indications when a DVD burner is connected Page About recovery used simultaneously Page Page Page Page Page Page Page Page When deleting scenes If you connected this unit and the DVD burner, selected scenes and then copied them to 1 disc. Cautions for use About this unit About the battery About the AC adaptor Causes of condensation About condensation LCD monitor/viewfinder Explanation of terms Automatic white balance White balance adjustment Auto focus Page Specifications Page Page Optional accessories Page Accessory Order Form (For USA Customers) Request for Service Notice (USA Only) Request for Service Notice: VQT1T64 Limited Warranty (For USA Customers) HDCSD100P-VQT1T64_ENG.book 147 Panasonic Video Products Limited Warranty Product Customer Services Directory http://www.panasonic.com/consumersupport MAIL TO: Accessory Purchases http://www.panasonic.com/contactinfo Warranty (For Canadian Customers) Panasonic Canada Inc. PANASONIC PRODUCT LIMITED WARRANTY Index Numerics A B C R S T V W Spanish Quick Use Guide/Gua espaola para el uso rpido Carga de la batera Insercin de la batera Cmo encender la unidad Insertar/extraer una tarjeta SD Seleccin del idioma Modo de ayuda Para salir del modo de ayuda Grabacin de pelculas Grabacin de fotografas Reproduccin de pelculas Reproduccin de fotografas Page P