Problem | Cause and Remedy | Page |
The printed image | • You can adjust the image quality on the [Image | — |
has poor tone | Adjustment] tab of the printer driver 4. |
|
balance. |
|
|
• The printed image | • Changing [Auto Mode] setting to [OFF] on the [Image | — |
is too bright. | Adjustment] tab of the printer driver 4 may improve |
|
• There is too much | these problems. |
|
image noise in the |
|
|
dark areas of the |
|
|
printed image. |
|
|
A message | • Have you connect the printer to USB port that supports |
|
indicating “The | printers? |
|
USB port cannot be | ⇒USB ports are displayed as [USB001] and [USB002]. | — |
located” is displayed | Check the USB port configuration. |
|
on the computer. | Checking method |
|
•For Windows XP
Select [Start] → [Control Panel] → [Printers and Other Hardware] → [Printers and Faxes] and open [Properties] window for this printer. Select USB ports on [Ports] tab.
•For Windows 2000
Select [Start] → [Settings] → [Printers] and open [Properties] window for this printer. Select USB ports on [Ports] tab.
•For Windows 98 SE/Me
Select [Start] → [Settings] → [Printers] and open [Properties] window for this printer. Select USB ports on [Print to the following port] on [Details] tab.
4 Printer driver
For operation details, see the help on the supplied
Others
97
