Panasonic KX-TA624 installation manual 208, Interdigit Time, Sec / 10 sec / 15 sec seconds

4.2	System Programming			208
			Interdigit Time
Description		Assigns the maximum time allowed between digits for an outgoing
		outside call.
Selection		5 sec / 10 sec / 15 sec (seconds)
Default		10 sec
Programming		1.	Enter 208.
			Display: Interdigit Time
		2.	Press NEXT.
			Display example: Time:10 sec
		3.	Keep pressing SELECT until the desired selection is
			displayed.
		4.	Press STORE.
		5.	Press END.

Conditions	• The interdigit timer applies until the toll restriction check is completed.
	When the timer expires, an outgoing outside call will be disconnected
	while dialing, if “Enable” was selected in program [211] “No Dial
	Disconnection”.
	• For a single line telephone, an outgoing outside call will be released
	from a DTMF receiver when the interdigit timer expires.

Feature Reference

Section 3, Features

Toll Restriction

System Programming 4-51