Panasonic KX-TA624 installation manual 423, Outside CO Line Ringing Pattern Selection

4.2	System Programming		423
	Outside (CO) Line Ringing Pattern Selection
Description	Assigns an incoming outside call ringing pattern for each outside
	(CO) line. There are three types of patterns as follows.
		1 s

Single:

Double:

Triple:

Selection

Default Programming

Conditions

Feature Reference

•Outside (CO) line number: 1 – 6, ( = all outside (CO) lines)

•Single / Double / Triple

Single

1.Enter 423.

Display: CO Ring Pattern

2.Press NEXT.

Display: CO NO? →

3.Enter an outside (CO) line number.

Pressing NEXT also can enter outside (CO) line number 1.

Display example: CO 1:Single

4.Keep pressing SELECT until the desired time is displayed.

5.Press STORE.

6.To program another outside (CO) line, press NEXT or PREV, or SELECT and enter the desired outside (CO) line number.

7.Repeat steps 4 through 6.

8.Press END.

•To assign all outside (CO) lines to the same selection, press the key in step 3. In this case, the display will show: CO :Mixed.

•The programs [115] “Extension Ringing Pattern Selection” and [706] “Doorphone Ringing/Tone Pattern Selection” should be considered when assigning this program.

Section 3, Features

Ringing Pattern Selection for Intercom Calls and Outside (CO) Lines

System Programming 4-81