Panasonic KX-TA624 installation manual 801, Smdr Parameter, Enter the skip perforation

801		4.2	System Programming
		SMDR Parameter
Description	Used to match the SMDR output to the paper size being used in the
	printer. The page length determines the number of lines per page.
	The skip perforation determines the number of lines to be skipped
	at the end of every page.
Selection	• Page length (lines): 4 – 99
	• Skip perforation (lines): 0 – 95
Default	Page length – 66; Skip perforation – 0
Programming	1.	Enter 801.
		Display: SMDR Parameter
	2.	Press NEXT to program the page length.
		Display example: Page Length:66
	3.	Enter the page length.
		To change the current entry, press CLEAR and enter the new page
		length.
	4.	Press STORE.
	5.	Press NEXT to program the skip perforation.
		Display example: Skip Perf: 0
	6.	Enter the skip perforation.
		To change the current entry, press CLEAR and enter the new skip
		perforation.
	7.	Press STORE.
	8.	Press END.

Conditions

•The page length should be at least four lines longer than the skip perforation length.

•The title is placed on the first three lines of every page.

•The programmed format becomes valid only if the Serial Interface (RS-232C) cable is connected. If a printer is already connected, disconnect it and connect again. Otherwise the previous format will be used.

Feature Reference

Section 3, Features

Station Message Detail Recording (SMDR)

4-122 System Programming