Panasonic KX-TA624 501, Disa Built-in Auto Attendant, Enter a Disa built-in auto attendant number

4.2	System Programming			501
		DISA Built-in Auto Attendant
Description		Assigns the DISA built-in auto attendant number. The extension
		number can be assigned as a one digit number and used as a DISA
		built-in auto attendant number.
Selection		• DISA built-in auto attendant (AA) number: 0 – 9
		• Jack number: 01 – 24 / Ring Group number: 1 – 8
Default		All numbers — Not stored
Programming		1.	Enter 501.
			Display: DISA Built-In
		2.	Press NEXT.
			Display example: AA NO? →
		3.	Enter a DISA built-in auto attendant number.

Pressing NEXT also can enter DISA AA number 0.

Display example: 0: Not Stored

4.Press SELECT until the desired selection is displayed and enter an extension or ring group number.

To change the current entry, press CLEAR and enter the new number.

Display example: 0: Jack-01

5.Press STORE.

6.To program another DISA AA number, press NEXT or PREV, or SELECT and enter the desired DISA AA number.

7.Repeat steps 4 through 6.

8.Press END.

Conditions

•To enable this feature, the user must select “With AA” in program

[500]“DISA Incoming Dialing Mode Selection”.

•This system can store up to ten programmable DISA built-in auto attendant numbers.

•If the user would like to use a line access number “9” and/or operator number “0” in the “With AA” mode, do not assign auto attendant number(s) which correspond to the line access number and/or operator number (0 and/or 9).

Feature Reference

Section 3, Features

Direct Inward System Access (DISA)

System Programming 4-83