Panasonic KX-TA624 installation manual 422, Disconnect Time

422	4.2	System Programming
	Disconnect Time

Description

Selection

Default Programming

Determines the amount of time to send the disconnect signal from the system to the Central Office or host PBX.

•Outside (CO) line number: 1 – 6, ( = all outside (CO) lines)

•Time (seconds): 0.5 sec / 1.5 sec / 4.0 sec

All outside (CO) lines – 1.5 sec

1.Enter 422.

Display: Disconnect Time

2.Press NEXT.

Display: CO NO? →

	3.	Enter an outside (CO) line number.
		Pressing NEXT also can enter outside (CO) line number 1.
		Display example: CO 1:1.5sec
	4.	Keep pressing SELECT until the desired time is displayed.
	5.	Press STORE.
	6.	To program another outside (CO) line, press NEXT or
		PREV, or SELECT and enter the desired outside (CO) line
		number.
	7.	Repeat steps 4 through 6.
	8.	Press END.
Conditions	• The disconnect time must be longer than the requirement of the Central
	Office or host PBX.

• To assign all outside (CO) lines to the same selection, press the key in step 3. In this case, the display will show: CO :Mixed.

Feature Reference

Section 3, Features

Flash

4-80 System Programming