Features 3-15
3 Features B
The functions of the listed buttons are described below.
AUTO ANSWER/MUTE:Used for answering an extension
automatically, or turns the microphone off during a conversation.
AUTO DIAL/STORE:Used for System Speed Dialing and storing
program changes.
CO (Central Office line): Can make or receive an outside call or
can be re-assigned to a different CO or various feature buttons.
CONF (Conference): Used to establish a three-party conference.
FLASH: Allows you to disconnect the current call and originate
another call without hanging up (Flash). Sends a flash signal to the
Central Office or host PBX to access their features (External
Feature Access).
FWD/DND (Call Forwarding/Do Not Disturb): Used to program
Call Forwarding, and set Do Not Disturb.
HOLD: Used to place a call on hold.
INTERCOM: Used to make or receive intercom calls.
MESSAGE:Used to send a message, display the current message,
call back the message sender, or can be assigned as another feature
button.
MONITOR: Used for a hands-free operation.
PAUSE:Inserts a pause in a speed dial number.
PF (Programmable Feature):This flexible button can be
programmed as a One-Touch Dialing button, if desired.
REDIAL: Used for Last Number or Automatic Redialing.
SAVE:Used to store a dialed telephone number for Saved Number
Redial.
SP-PHONE (Speakerphone): Used for a hands-free speakerphone
operation. Pressing the button causes the telephone to switch
between the handset and hands-free operation.
TRANSFER: Transfers a call to another extension or external
destination.
Conditions • Certain buttons are equipped with light indicators (LED’s) to show the
line or feature status.
•CO buttons can be classified according to the following three types:
Single-CO (S-CO) button / Group-CO (G- CO) button /
Other-CO (O- CO) button
Programming Reference
Station Programming RRRRRRRRRR User Manual
Flexible Button Assignment
Feature References None
Operation References Refer to the appropriate operating instructions.
— User Manual