Panasonic KX-TCD545E Setting the PBX Line Access Number, Turning the SMS Feature On/Off

SMS Feature (Text Message)

Setting the PBX Line Access Number

This feature is only for the phones connected to a PBX. This allows you to delete automatically the PBX line access number (max. 4 digits) when you enter the destination phone number of an SMS outgoing message from Handset Phonebook, Redial or Caller ID lists.

To exit the operation, press at any time.

1	Press JOYSTICK	2	Select “	SMS”.	3	Select “Parameters”.
	(or move).
4	Enter 4-digit Base	5	Select “PBX Prefix”.		6	Select “On”.
	Unit PIN.
	(Factory Preset
	0000)
7	Enter Line Access	8	Press JOYSTICK.		9	Select “Save”, then
	Number.					“Saved” is displayed.

(max. 4 digits)

Telephone System

•The factory preset is no entry of line access number.

Turning the SMS Feature On/Off

To exit the operation, press at any time.

1	Press JOYSTICK	2	Select “	SMS”.	3	Select
	(or move).					“Parameters”.
4	PIN.Enter 4-digit Base Unit	5	Select “SMS On/Off”.		6	Select “On” or “Off”.
	(Factory Preset 0000)

When the SMS feature is turned off;

•If you send a message, a tone sounds and the message will return to the SMS incoming list with “FD” attached.

•If you receive from SMS centre call, the message will not be received but SMS centre phone number will remain in the Caller ID list.

•If you turn the SMS feature on, the unit will begin ringing (one ring) after other connected telephones.

•The factory preset is “On”.

Helpline Tel.No. :U.K. 08700 100 076 R.O.I. 01289 8333 63