Installing/removing SIM card and battery
1. Remove the battery cover from the unit. To fit the battery cover, put it on the guide rail and push up.
Correct Incorrect
2.Insert the SIM card
into the slot. 
The gold contacts 
of the SIM card 
should go against 
the metal contacts 
of the phone.
Put the contacts of the battery into the hole located at the bottom of the unit and then insert
and press the upper side of the battery until you hear the “click”. Make sure you align the gold contacts at the
battery end with contacts on the phone. If the contacts at the battery are not properly aligned, damage could occur to the phone and the battery.
Correct Incorrect
3.To remove the battery, push the bottom of the battery to upwards
(1) and remove (2) the battery.
Push the SIM card
Getting started 
in the arrow direction as shown.
To charge your battery
1.To charge, connect the charger adapter as shown right.
Correct Incorrect
Correct Incorrect
18 | 19 |
