Paxar 2 manual

256Printhead energy must be 0 (standard supplies), 1 (fax paper), or 2 (linerless/synthetic supplies).

257Feed mode must be 0 (continuous) or 1 (on demand - if option is used).

258Supply position is outside the range.

259Contrast adjustment must be 28 - 40 dots.

260Print adjustment must be -99- 99 dots.

261Margin adjustment must be -99- 99 dots.

262Speed adjustment must be 0.

263Primary monetary symbol is invalid.

264Secondary symbol selection must be 0 (none) or 1 (print secondary sign).

265Monetary decimal places must be 0 - 3.

266Character string length in the control characters packet must be 5 (MPCL control characters) or 7 (ENQ/IMD command character)

267Baud rate selection must be 0 (1200), 1 (2400), 2 (4800), 3 (9600), 4 (19200), 5 (38400). Resend the communication settings packet.

268Word length selection must be 0 (7 bits) or 1 (8 bits). Resend the communication settings packet.

269Stop bits selection must be 0 (1 bits), or 1 (2 bits). Resend the communication settings packet.

270Parity selection must be 0 (none), 1 (odd), or 2 (even). Resend the communication settings packet.

271Flow control selection must be 0 (none), 1 (DTR), 2 (CTS/RTS), or 3 (XON/XOFF). Resend the communication settings packet.

Troubleshooting 8-11