Paxar 2 manual F i n i n g t h e S u p p l y S e t u p Pa c k e t, 10Configuring the Printer

Example {I,A,0,0,0,1,0 p }

Powers up the printer in the online mode, displays prompts in English, does not print a separator after each batch, prints zeros with slashes through them, and uses the internal symbol set.

D e f i n i n g t h e S u p p l y S e t u p Pa c k e t

Use the supply setup packet (B) to select supply type, ribbon, feed mode, supply position, and cut position.

Syntax {I,B,supply_type,ph_energy,feed_mode, supply_posn p}

B1. B Supply Setup Packet

B2. supply_type Supply Type. Options:

0Black mark supply

1Die Cut supply (default)

2 Non-indexed supply

Note: You must use non-indexed supply in continuous mode. Also, you may need to adjust the print contrast (in the Print Control packet), based on the type of supply you are using.

B3. ph_energy

0Standard Supplies

1 Special (fax paper)

2 High Energy (linerless and synthetic)

Note: Monarch does not recommend that you print serial bar codes with linerless supplies.

B4. feed_mode Feed Mode. Options:

0Continuous operation (default)

1On-demand mode (purchase optional)

2-10Configuring the Printer