Paxar 2 manual T i o n 4 C o p y D a t a, Src fld,src start,# to copy,dest, Start,copy code p

O p t i o n 4 ( C o p y D a t a )

You can create a field that uses data from another field. This is useful for creating merged fields or sub-fields. You can copy the information from multiple fields into one field by applying the copy procedure more than once. Copy data is the only option you can apply to a field more than once.

The maximum number of characters defined in box T3 or B3 must allow for the number of characters you will place in the field, including any price, check digit, or fixed characters inserted by the printer. The maximum number of characters in the field into which data is copied cannot exceed 2710 or the maximum number of characters permitted by the bar code.

When copying from more than one field, copy into the destination field from left to right.

Syntax		R,4,src fld,src start,# to copy,dest
		start,copy code p
R1.	R	Field Option Header.
R2.	4	Option 4.
R3.	src fld	Field number from which data is copied. Range: 0 to 999.
R4.	src start	Position number in the source field of the first character to be
		copied. Character positions are numbered 1 to 2710, starting
		from the left.
R5.	# to copy	Number of characters to copy. Range: 1 to 2710.
R6.	dest start	Position number where copied characters are to begin printing
		in the destination field. Range: 1 to 2710.
R7. copy code		Copy Method.
		1	Copy field as is (including price symbols,
			pad characters, check digits, etc.).
		2	Copy unformatted data (without price characters,
			pad characters, etc.).

Defining Field Options 4-5