Paxar 2 manual Buffer,device,buffersize p

D e f i n i n g t h e M e m o r y C o n f i g u r a t i o n P a c k e t

Use the memory configuration packet (M) to customize the size of your printer’s buffers, which gives you greater flexibility in your formats.

Memory must be allocated in 1/2K increments. The memory configuration packet does not accept decimals, so enter whole numbers. Multiply the amount to reallocate (in K) by 10. For example,

To reallocate (in K)	Enter this amount
1	10
1.5	15
2	20
2.5	25
153	1530
229.5	2295

Each buffer’s allocated memory remains in effect until that buffer is reallocated. For this reason, you may want to reallocate all the buffers when reallocating any buffer. If you reallocate more memory than you have available, you will receive an error.

Syntax	{I,M,buffer,device,buffer_size p }
M1. M	Memory Configuration Packet
M2. buffer	Buffer type:

DDownloadable Fonts

FFormat

IImage

RReceive

TTransmit

VScalable (vector) fonts

M3. device	Storage type:
	Use R (volatile RAM)
	Note: You cannot reallocate flash memory.

Configuring the Printer 2-21