C o m m u n i c a t i o n E r r o r s

Error Description

Code

409The printer memory is full. Delete unnecessary formats or graphics from memory. If you are using a graphic file that is very large, consider using another mapping method (such as run length encoding) to reduce the required memory.

410Parity on the printer does not match the parity on the host. Check the parity setting under SETUP options.

411Framing error. The printer cannot communicate with the host. Make sure the host is turned on, communication cables are connected correctly, port settings are correct, and communications are active. Check the baud rate, word length, and stop bits to make sure they match those at the host. Do not toggle between Microsoft Windows and MS-DOS while using the COPY command, or you will receive a framing error. Exit Windows before using the COPY command. Re-transmit the data.

412There is a problem with flow control between the printer and the host. Make sure the printer and the host flow control settings match (both are DTR or both are XON/XOFF). If the error persists, call Technical Support.

413Online receive queue is full. Check your printer’s XON/XOFF or DTR SETUP values to be sure there isn’t a flow control problem.

414The internal keyboard buffer is full or you need a new keypad. Call Technical Support.

415The buffer size you defined exceeds the total available in your machine.

423 Internal software error. Call Technical Support.

8-14Troubleshooting

Page 152
Image 152
Paxar 2 manual M m u n i c a t i o n Error s