Paxar 2 manual K i n g P r i n t a d j u s t m e n t s

Models: 2

1 234
Download 234 pages 15.18 Kb
Page 28
Image 28

C o n f i g u r a t i o n S y n t a x G u i d e l i n e s

When creating a printer configuration packet:

Follow the "Standard Syntax Guidelines" listed at the beginning of this chapter.

Begin a packet with the configuration header (I).

Download multiple configuration packets within one packet or download a single configuration packet.

Include the first five ANSI codes, at a minimum, in the control characters packet.

If you change any of the online configuration packets, resend the format packet to the printer, so the configuration changes take effect.

Make sure the communication settings at the host match those at the printer.

M a k i n g P r i n t A d j u s t m e n t s

You can adjust where the printer prints on your supply by adjusting the supply, print, or margin positions. However, keep in mind the following:

Supply adjustments across the width of your supply, such as the margin position, are based in dots. The printhead has 203 dots per inch.

Supply adjustments for the length of your supply, such as supply position or print adjustment, are measured in 1/203 of an inch.

2-8Configuring the Printer

Page 28
Image 28
Paxar 2 manual K i n g P r i n t a d j u s t m e n t s, N f i g u r a t i o n S y n t a x G u i d e l i n e s