USING THE TV REMOTE’S VCR-SPECIFIC BUTTONS
To use the TV remote control with a VCR, first make certain it is set to control your VCR using one of the programming methods explained on pages 22 and 23.
1 Press the VCR mode button. Be sure the button light that appears is green.
2 Point the top of the remote toward the front of the VCR (remote sensor win- dow) when pressing the buttons.
VCR Mode
Press to place the remote in a mode to con- trol a VCR.
VCR Prog.
Many VCRs have an automatic program- ming function. If your VCR has this func- tion, the universal code set will assign it to this function.
VCR Timer
Press to set up a timer recording in the VCR
•(Record)
Hold the • (Record) and Play buttons down to begin a VCR recording.
Stop ■
Press to stop the motion of a tape in play- back, rewind, and fast forward.
Rewind
Press to rewind tapes. For some VCRs, the Stop button may have to be pressed first, then Rewind. In playback mode, hold down the button to view the picture moving rapid- ly in reverse.
HELPFUL HINT
Remember, the VCR buttons on the remote will not operate your VCR if those features are not found on your VCR remote control.
NOTE: All VCR functions (particularly Search, Rewind, and Fast Forward) will operate the same as with the remote control provided with the VCR.
2
Power
Press to turn the VCR on and off.
1
Cursor Up/Down/Left/Right
Press to navigate the VCR
CH (Channel Selection)
Press to scan up or down through the
VCR channel numbers.
Digits (Numbers)
Press to directly select VCR channels.
Pause II
Press to temporarily stop the tape dur- ing playback or recording. Press again to release Pause.
Play
Press to begin playback of a videotape.
Fast Forward
Press to rapidly advance the tape. For some VCRs, you may need to press the Stop button first, then the Fast Forward button. In playback mode, hold the but- ton down to view the picture moving rapidly in the forward direction.
26
