Philips MP20/30, MP40/50, MP60/70/80/90 Displaying Timers On The Main Screen

Displaying Timers On The Main Screen 28 Using Timers
287
Run Time
The run time can be set between 1 minute and 96 hours. N o Limit timers have no run time.
To set the run time, in the Timers window:
1Select the required timer to display the Setup window.
2Select Run Time .
3Select a run time from the list.
Timer Counting Direction
Timers can count up or down, showing elapsed time or remaining time. No Li mit timers
automatically count up.
To change the direction, in the Timers window:
1Select the required timer to display the Setup window.
2Select Direction to switch between Up and Down.
Displaying Timers On The Main Screen
If you want to have a timer displayed on the Main Screen, you can substitute it for a numeric which is
not directly associated with a wave. If limited space is available, some elements displayed in the
Timers window may not be displayed. The minimum information displayed is the label and the
elapsed or remaining time.
To display a timer on the Main Screen:
1Select the numeric you want to substitute.
2Select Change Numeric.
3Select Any Timer.
4Select the timer to be displayed.
TimerA2 hrs