Manufacturer’s Information

34 Installation and Specifications

You can write to Philips at this address

Philips Medizin Systeme Boeblingen GmbH

Hewlett-Packard-Str. 2

71034 Boeblingen

Germany

Visit our website at: www.philips.com.

BIS Manufacturer’s Information

BISx, the BIS engine, the DSC, the Patient Interface Cable and the BIS Sensor are manufactured by Aspect Medical Systems:

Aspect Medical Systems, Inc

141 Needham St

Newton,

MA 02464

USA

1-617-559-7000 Free call:

1-888-BIS_INDEX

1-888-247-4633

Email: bis_info@aspectms.com

Web: www.aspectmedical.com

Address of the EU Authorized Representative:

Aspect Medical Systems International B.V.

Rijnzathe 7d2

3454 PV De Meern

The Netherlands

Phone: +31.30.662.9140

Email: amsint@aspectms.com

326

Page 346

Image 346

Philips MP20/30, MP60/70/80/90, MP40/50 BIS Manufacturer’s Information, Address of the EU Authorized Representative

MP60/70/80/90, MP40/50, MP20/30 specifications

Philips MP20/30, MP40/50, and MP60/70/80/90 are advanced patient monitoring systems designed to enhance clinical workflows and patient care in diverse healthcare settings. These devices combine cutting-edge technologies and user-friendly interfaces, making them essential tools for hospitals and healthcare providers.

The MP20 and MP30 are notable for their compact design, making them ideal for environments where space is limited. They come equipped with a variety of monitoring parameters, including ECG, SpO2, and non-invasive blood pressure, providing a comprehensive overview of patient health. These models are particularly suited for use in general wards or recovery areas, offering reliability and ease of use.

Moving to the MP40 and MP50, these monitors incorporate more advanced functionalities, including multi-gas monitoring, which is vital for anesthetic applications. They feature a robust data storage capacity, allowing for extensive patient history tracking and improved decision-making capabilities. The intuitive touchscreen interfaces facilitate quick access to essential information, enabling healthcare professionals to respond efficiently to changes in a patient's condition.

The MP60, MP70, MP80, and MP90 series represent the pinnacle of Philips' patient monitoring technology. These monitors are equipped with advanced algorithms that enhance the precision of vital sign measurements, including advanced ECG analysis capabilities that assist in detecting arrhythmias. The MP80 and MP90 models further integrate advanced monitoring technologies such as 3D visualization for hemodynamics and deep learning algorithms for early warning systems.

Connectivity is a key feature across the Philips monitoring range, with many models offering seamless integration with hospital information systems and electronic health records. This connectivity ensures that patient data is easily accessible to clinicians, promoting informed decision-making. Moreover, alarm management features are designed to minimize false alarms, significantly improving the staff's response time by focusing on critical alerts.

In summary, Philips MP20/30, MP40/50, MP60/70/80/90 monitors deliver exceptional monitoring capabilities, combining user-friendly design with advanced technology. Their varied features allow them to cater to different clinical needs, enhancing patient care and supporting healthcare professionals in their critical roles. With these monitors, healthcare facilities can achieve a new standard in patient monitoring, ensuring quality and safety in patient management.

Contents

IntelliVue Patient Monitor M8000-9001G Table Of Contents What’s New? Patient Alarms and INOPs ECG, Arrhythmia, and ST Monitoring Capture 12-Lead Monitoring Pulse Rate Monitoring SpO2 Monitoring Invasive Pressure Monitoring Carbon Dioxide Monitoring tcGas Monitoring BIS Calculations Recording Using the Drug Calculator Respiratory Loops Accessories Default Settings Appendix TcGas Default Settings Basic Operation Introducing the IntelliVue Family IntelliVue MP20/MP30 MP20/MP30 Major Parts and Keys AC Power LEDMP20/MP30 left side MP20/MP30 front panel MP40/MP50 Major Parts and Keys IntelliVue MP40/MP50MP40/MP50 left side IntelliVue MP60/MP70 MP40/MP50 front panel MP60/MP70 Major Parts and Keys IntelliVue MP80/MP90 D80 Intelligent Display Remote Alarm DeviceMP80/MP90 Major Parts and Keys Display Unit Docking Station Related ProductsFlexible Module Server M8048A Measurement Modules Multi-Measurement Server M3001A Example Module Pressure M3001A Connectors and Symbols Measurement Server Extensions M3014A, M3015A and M3016A Capnography Extensions M3014A Capnography M3016A Mainstream M3012A Hemodynamic Measurement Server Extension M3012A Hemodynamic Operating and Navigating Enter Main Setup menuMonitor information line Other screen elements Selecting Screen Elements Using the Setup MenuUsing the Touchscreen Disabling Touchscreen Operation Using the SpeedPoint Follows the Silence permanent key configuration Using Keys Using the Navigation PointUsing a Mouse or Trackball Permanent Keys SmartKeys Hardkeys Pop-Up Keys Using the On-Screen Calculator Using the On-Screen KeyboardMC MR M+ Back √ C/CE Select Main Setup, followed by Monitor Standby Standby ModeOperating Modes Changing a Screen’s Content Switching to a Different ScreenUnderstanding Screens Change Screen menu Using Additional DisplaysWaves a Split Screen a Loops Cardiac Output Vital Signs a Monitor Settings Using the Visitor ScreenMeasurement Settings Understanding Profiles Swapping a Complete Profile Measurement a Measurement B Measurement C Measurement D Default Profile Understanding SettingsSwapping a Settings Block Changing Measurement Settings Adjusting a Measurement Wave Switching a Measurement On and OffSwitching Numerics On and Off Changing Wave Speeds Freezing An Individual Wave Freezing WavesChanging Wave Speed for a Channel Freezing All Waves Using Labels Labels are shown in red Resolving Label ConflictsConflicting measurement De-activated labels are Grayed-out Adjusting Touch Tone Volume Changing Monitor SettingsAdjusting the Screen Brightness Setting the Date and Time Checking Your Monitor Revision Switching OnSetting up the Measurement Servers and Modules Getting Started Monitoring After a Power Failure Disconnecting from PowerUsing Remote Applications Networked Monitoring Pop-Up Keys Selecting this pop-up key lets you Remote Application Popup KeysRemote Applications SmartKey Again What’s New? What’s New in Release D.0? What’s New in Release C.0? What’s New in Release B.1? What’s New in Release B.0? What’s New in Release A.2? What’s New in Release A.2? Alarms ↑ ** HR High Audible Alarm Indicators Visual Alarm IndicatorsAlarm Tone Configuration Traditional Audible Alarms HP/Agilent/Philips/Carenet Changing the Alarm Tone VolumeMinimum Volume for No Central Monitoring Inop ISO/IEC Standard 9703-2 Audible Alarms Alarm Reminder ReAlarm Acknowledging AlarmsPausing or Switching Off Alarms Select Main Setup -Alarm Settings To Switch Individual Measurement Alarms On or Off To Pause All AlarmsTo Switch All Alarms Off While Alarms are Paused or Off Resetting Arrhythmia Alarm Timeouts Alarm LimitsRestarting Paused Alarms Extending the Alarm Pause Time Viewing All Alarm Limits Alarms Changing Alarm LimitsOn/Off Alarm limits About Automatic Alarm Limits AutoLimitsDocumenting Alarm Limits Measurement value Review Alarms Window Reviewing AlarmsAlarm Messages Window Alarm Review Pause Al Limits Alarms Min 10 Min Latching Alarms Understanding Alarm MessagesViewing the Alarm Latching Settings Alarm Behavior at On/Off Testing AlarmsAlarm Latching Behavior Patient Alarm Messages Patient Alarms and INOPsAlarm Message From Condition Indication CPP High CCO/CCI HighCCO/CCI LOW CPP LOW Irregular HR HR HighHR LOW Missed Beat Pacer NT NON-SUSTAIN VTPacer not Capt Pacing RR LOW RR HighST Multi Vent FIB/TACH AlarmVent Bigeminy Vent Rhythm Technical Alarm Messages INOPs Inop Message, Indication Source What to do BIS Cable Usage BIS DSC UpdateBIS Cable Incompat BIS DSC Disconn BIS Overcurrent BIS Isoelectrc EEGBIS Lead OFF BIS Sensor Disconn CCI no BSA Cannot Analyze ECGCannot Analyze ST CCO BAD Press Sign CCO Pulse Overrang CCO Press InvalidCCO Press Overrang CCO Recalibrate CO2 Auto Zero CO2 CAL ModeLead OFF CO2 CAL Running Equip Malf CO2 Update FWCO2 Check CAL CO2 Equip Malf CO2 Zero Running CO2 Zero FailedCO2 Zero Required CPP CHK Sources EEG Line Noise Eegx Lead OFFEegx Leads OFF EEG Muscle Noise MMS Unplugged Leads OFFLL Lead OFF MMS Unsupported NBP Interrupted SignalPPV BAD Signal NBP Measure Failed Pulsatile MalfTransducer Overrange Spiro Alarms Suppr Some ECG Alarms OFFSpiro Upgrade Resp Erratic SpO2 label Deactivated SpO2 label EXTD. UpdateSpO2 Label Poor Signal SpO2 label Equip Malf Configuration Label UpgradeCAL Mode CAL Failed SVR/SVRI SET CVP Used SVR/SVRI CHK SourcesSVR/SVRI CHK Units CAL Requird No Transduc Stabilizing Cable SetupConf Managing Patients Admitting a Patient Patient Category and Paced Status Quick Admitting a PatientAdmitting a Centrally-Monitored Patient Editing Patient Information Discharging a Patient Transferring Patients Transferring a Centrally-Monitored Patient Data Upload from an MMS MMS Trend Upload and MMS Settings UploadTransferring a Patient with an MMS no Central Station Resolving Patient Information Mismatch Data Exchange Between Information CentersManually Resolving Patient Mismatch Patient Mismatch If One Set of Patient Data is Correct Patient Mismatch If Neither Patient Data Set is Correct Patient Mismatch If Both Patient Data Sets Are Correct Care GroupsAutomatically Resolving Patient Mismatch Patient Information This information is taken from Understanding the Care Group Overview Bar Depending on space available Main Setup menu, select My Care Group Viewing the My Care Group Window 110 Viewing the Other Bed Window Visual Alarm Status Information in the Other Bed Window Care Group AlarmsOther Bed Pop-Up Keys Unpairing a Telemetry Device Telemetry Data Overview Using Standby Silencing Telemetry Alarms from the BedsideSuspending Telemetry Alarms Telemetry Data Overview Screen Element Connecting ECG Cables Skin Preparation for Electrode PlacementECG, Arrhythmia, and ST Monitoring Selecting the Primary and Secondary ECG Leads Checking Paced Status Understanding the ECG Display Monitoring Paced Patients Avoiding Pace Pulse Repolarization Tails Setting the Paced Status Pace Pulse RejectionChanging the Size of the ECG Wave To Change the Size of an Individual ECG Wave Changing the ECG Filter Settings Changing the Volume of the QRS ToneTo Change the Size of all the ECG Waves ECG Leads Monitored Choosing Easi or Standard Lead PlacementAbout ECG Leads Changing Lead Sets ECG Lead Fallback ECG Lead PlacementsElectrode labels Electrode colors Standard 3-Lead Placement Standard 5-Lead Placement Chest Electrode Placement Lead Placement Conventional 12-Lead ECG Labelling 12-Lead ECG Reports Choosing Standard or Modified Electrode PlacementModified 12-Lead ECG When Mod. LeadPlacement is set to Off Easi ECG Lead PlacementCapture 12-Lead On the lower sternum at the level ECG, Arrhythmia, and ST Alarm Overview Using ECG Alarms ECG Safety Information 106 About Arrhythmia Monitoring Where Can I Find More Information?Arrhythmia Options Aberrantly-Conducted Beats Switching Arrhythmia Analysis On and OffChoosing an ECG Lead for Arrhythmia Monitoring Atrial Fibrillation and Flutter Viewing Arrhythmia Waves Understanding the Arrhythmia DisplayIntermittent Bundle Branch Block Arrhythmia Beat Labels Rhythm Status Messages Arrhythmia Status MessagesDescription Or E Ectopic Status Messages Arrhythmia RelearningInitiating Arrhythmia Relearning Manually Explanation Or E Automatic Arrhythmia Relearn Arrhythmia AlarmsArrhythmia Relearn and Lead Fallback Switching Individual Arrhythmia Alarms On and Off Yellow Arrhythmia AlarmsArrhythmia Alarms and Latching Switching All Yellow Arrhythmia Alarms On or Off Resetting the Timeout Period How are Yellow Arrhythmia Alarms Indicated?What is a Timeout Period? Behavior of Unsilenced Arrhythmia Alarms PVC Alarms Chain Arrhythmia Alarm ChainingRed Arrhythmia Alarms Yellow Arrhythmia Alarms Beat Detection Alarms Chain Run PVCs Understanding PVC-Related AlarmsNon-Sustain Tach Pair PVCs About ST Monitoring Switching ST On and OffSelecting ST Leads for Analysis Understanding the ST Display ST-II ST-V ST-aVR Updating ST Baseline Snippets Recording ST Segments Adjusting ST Measurement Points About the ST Measurement Points ST-I ISO Point ST Point J+60 Changing ST Alarm Limits ST AlarmsSingle- or Multi-lead ST Alarming Viewing ST Maps Trend View ST Map Current Viewing an ST Map Switching Between ST Map ViewsSetup ST Analysis menu, select ST Map Working in the ST Map Task Window Changing the Scale of the ST Map Displaying an ST Reference BaselineUpdating an ST Map Reference Baseline Changing the Trending Interval 126 Monitoring Pulse Rate Entering the Setup Pulse MenuSystem Pulse Source Selecting the Active Alarm Source HR or Pulse? Switching Pulse On and OffUsing Pulse Alarms Setup SpO2 menu Changing HR/Pulse Alarm Limits Alarm Source Selection DisabledQRS Tone 130 Optimizing Lead Placement for Resp Lead Placement for Monitoring RespCardiac Overlay Changing Resp Detection Modes Auto Detection ModeUnderstanding the Resp Display Lateral Chest Expansion Changing the Size of the Respiration Wave Manual Detection ModeResp Detection Modes and Cardiac Overlay Resp Safety Information Using Resp AlarmsChanging the Apnea Alarm Delay Changing the Speed of the Respiration Wave 135 136 SpO2 Sensors Monitoring SpO2Applying the Sensor Connecting SpO2 Cables Measuring SpO2 Assessing a Suspicious SpO2 Reading Adjusting the Alarm Limits Understanding SpO2 AlarmsAlarm Delays Adjusting the Desat Limit Alarm Setting Up Tone Modulation Perfusion Pleth IndicatorSetting SpO2/Pleth as Pulse Source Setting the QRS Volume Choose the second measurement source Monitoring NBP Introducing the Oscillometric NBP Measurement Measurement Methods Preparing to Measure NBPMeasurement Limitations Reference Method Correcting the Measurement if Limb is not at Heart Level Understanding the NBP Numerics Enabling Automatic Mode and Setting Repetition Time Starting and Stopping Measurements Calibrating NBP Choosing the NBP Alarm SourceAssisting Venous Puncture Menu option Pressure value monitored 148 Selecting a Temperature for Monitoring Monitoring TemperatureMaking a Temp Measurement Extended Temperature Label Set Calculating Temp Difference Setting up the Pressure Measurement Monitoring Invasive Pressure Extended Pressure Label Set Zeroing the Pressure TransducerSelecting a Pressure for Monitoring Label Description Determining a Pressure’s Most Recent Zero Using the Zero HardkeyZeroing ICP or IC1/IC2 Zeroing a Pressure Measurement Displaying a Mean Pressure Value Only Adjusting the Calibration FactorTroubleshooting the Zero Changing the Pressure Wave Scale Optimizing the Waveform Choosing the Pressure Alarm SourceNon-Physiological Artifact Suppression Calibrating Reusable Transducer CPJ840J6 Making the Pressure Calibration Calculating Cerebral Perfusion Troubleshooting the Pressure CalibrationCalculating Pulse Pressure Variation Measuring Pulmonary Artery Wedge Pressure Editing the Wedge Identifying the Pressure Analog Output Connector Monitoring Cardiac Output Hemodynamic Parameters Using the C.O. Procedure Window Cardiac Output Transpulmonary Entering the HemoCalc Window Accessing the Setup C.O. and Setup CCO MenusMeasuring C. O. Using the PiCCO Method Measuring Continuous Cardiac Output Setting Up the PiCCO C.O. Measurement CVP Performing PiCCO C.O. Measurements Editing PiCCO C.O. Measurements CCO Calibration Status Indicators Saving and Calibrating PiCCO C.O. Measurements Setting up RH C.O. Measurements Measuring C.O. Using the Right Heart Thermodilution MethodIce-Bath Setup for RH Thermodilution C.O. Measurements Performing RH C.O. Measurements Setting the Computation ConstantDocumenting C.O. Measurements Editing and Saving RH C.O. Measurements Injectate Guidelines Injectate Volume, Patient Weight and Etvi Values PiCCO OnlyCold Injectate Room Temperature Injectate Etvi Etvi ≥ Guidelines for Right Heart Thermodilution C.O. Injectate CCO Curve Alert Messages Possible Causes CCO Prompt Messages CCO Prompt Messages Possible Causes CCO Warning Messages Possible Causes CCO Safety InformationCCO Warning Messages O. module or measurement server extension has been plugged 174 Monitoring Carbon Dioxide Using the Capnography Extension M3014A Preparing to Measure Mainstream CO2 Preparing to Measure Sidestream CO2 Using the Sidestream Sensor Holder Checking Transducer Accuracy Using the Mainstream CO2 Extension M3016ARemoving Exhaust Gases from the System Calibrating the Transducer Attaching and Removing the CO2 Transducer Using Microstream Accessories Using the Microstream CO2 Extension M3015APreparing to Measure Microstream CO2 Using the FilterLine and Airway Adapter Removing Exhaust Gases from the System Setting up CO2 Corrections Setting up Mainstream and Sidestream CO2Adjusting the CO2 Wave Scale Suppressing Zero Calibration Deriving Alarms From awRR Changing CO2 AlarmsChanging the Apnea Alarm Delay Changing awRR Alarm Limits 185 186 Monitoring Airway Flow, Volume and Pressure Attaching the Flow Sensor 189 Zero Calibration Automatic Purging Manual Purging Adult ModeIncorrect Balance Gas Setting N2O instead of N2 Gas Compensation Alarms and Alarm Limits Setting up SpirometryOptimizing Scale Settings Changing the Apnea Alarm Delay Setup Spirometry menu, select Gas Compensation Setting the Gas Compensation ModeAutomatic Alarm Suppression Choosing Measured AWV Components Changing the Temperature of the Inspired Gas Monitoring tcGas Identifying tcGas Module Components Using the tcGas Site Timer Setting the tcGas Sensor TemperatureSetting the tcGas Site Timer Disabling the tcGas Site Timer Setting the tcGas Barometric PressureRestarting the tcGas SiteTimer Remembraning the tcGas Transducer New/Dried Out Transducers Storing tcGas Transducers Calibrating the tcGas Transducer Troubleshooting tcGas Calibration Calibration Failure Applying the tcGas Transducer Finishing tcGas Monitoring TcGas Corrections Monitoring SvO2 Preparing to Monitor SvO2 Carrying out a Pre-insertion Calibration Inserting the Catheter Performing a Light Intensity Calibration Calculating Oxygen Extraction Setting Up the In-Vivo CalibrationPerforming In-Vivo Calibration Making the In-Vivo Calibration Percentage of total power in each frequency band Monitoring EEG EEG Montage SmartKey EEG Monitoring SetupUsing the EEG Impedance/Montage Window KOhm ImpedanceLimit5kOhm EEG 1 F3-P3 EEG 2 F4-P4 Montage Name Choosing an EEG Electrode MontageChanging the Impedance Limit Label1 Impedance Indicators About Electrode-to-Skin Impedance About Compressed Spectral Arrays CSA CSA contains the following information Switching EEG Numerics On and Off Changing EEG SettingsChanging CSA Settings Changing the Scale of the EEG Waves for Display Changing the Speed of the EEG Wave EEG ReportsChanging Filter Frequencies CSA on Report EEG Safety Information EEG and Electrical Interference Monitoring BIS BIS Monitoring Setup Monitoring BIS Using the DSC and BIS Engine Aspect BIS Sensor Aspect BISx 185-0145-PH Monitoring BIS using the BISxBoard With sensors for single-patient use Manufacturer’s Information BIS Continuous Impedance CheckBIS Cyclic Impedance Check Starting a Cyclic Impedance Check Symbol Color Action BIS Impedance IndicatorsBIS Window Changing the BIS Smoothing Rate Switching BIS and Individual Numerics On and OffSwitching BIS Filters On or Off Changing the Scale of the EEG Wave BIS Safety Information 222 Trends Viewing Trends Viewing Graphic Trends Viewing Vital Signs Trends Setting Up Trends Trends Pop-Up Keys Making Segment Settings Trend Priority Trend GroupsTrend Interval Trend Parameter Scales Documenting Trends Graphical Trend Presentation Aperiodic Trends Database Trends DatabasesScreen Trends Trending Multiple-Value Measurements Setting the Screen Trend Time Changing the Screen Trend View Changing the Selection of Screen Trends DisplayedActivating the Cursor for Screen Trends Tabular View Setting the Horizon Trend Scale Setting the HorizonHorizon View Viewing Calculations CalculationsHemodynamic Oxygenation Ventilation Calculations Windows Calculations Pop-Up Keys Reviewing Calculations Performing Calculations Automatic Unit Conversion Entering Values for CalculationsAutomatic Value Substitution Manual Unit Conversion Documenting Calculations 238 Hi-Res Trend Wave Scales High Resolution Trend WavesChanging the Hi-Res Trend Waves Displayed Hi-Res Trend Waves and OxyCRG Hi-Res Trend Wave Recordings Printing Hi-Res Trend Wave ReportsRecordings Basic Event Event SurveillanceLevels of Event Surveillance Surveillance Advanced Event Surveillance Event Groups Event Episodes Open the Event Episode window to review the selected event Events Pop-Up KeysEvent Episode Types Pre-time Post-time Detail SpO2 Resp Event TriggersABP Event Retriggering Setting Triggers for NER and Basic Event SurveillanceEvent Notification For each Triggering Events ManuallySet the event trigger HR Pulse Viewing Events Events DatabaseEvent Counter Counting Neonatal Event Review NER Events Counting Combi-EventsAD21 BD71 AB D 11 D6 M0 Event Summary Window Event Review Window Event Episode Window Apnea Documenting Events Annotating EventsDocumenting Event Review Event Recordings Documenting an Event EpisodeEvent Review Recordings Plet Event ReportsEvent Episode Recordings Res Event Review Reports Event Episode Reports Event Summary Reports 256 Recording Stop key Stops the current recording Starting and Stopping Recordings Quickstarting Recordings Stopping Recordings Overview of Recording TypesExtending Recordings Recording Without a Template All ECG Waves Recordings Creating and Changing Recordings Templates Setup Recording menu select General Select ECG Gain Changing ECG Wave Gain Sample Recording Strip Recording PrioritiesRecording Strip Code Maintaining Recording Strips Recorded WaveformsCode Meaning Reloading Paper Recorder Status Messages Recorder Status Messages Explanation 266 Printing Patient Reports Report types Report contents How to start printing reportsStarting Reports Printouts Stopping Reports Printouts Setting Up ReportsSetting Up ECG Reports Limits Setting Up Vital Signs and Graphic Trend Reports Setting Up Auto Reports Setting Up Individual Print Jobs Checking Printer Settings Dashed Lines on Reports Unavailable Printer Re-routing Reports Sample Report Printouts Printer Status MessagesPrinter Status Message Possible causes and suggested action Alarm Limits Report Patient Name Realtime Report Cardiac Output Report Other Reports ECG ReportsECG Report type Available Formats Available Paper Sizes Using the Drug Calculator Accessing the Drug Calculator About the Rule of Six Performing Drug CalculationsPerforming Calculations for a Non-Specific Drug Performing Calculations for a Specific Drug Drug Calculator Documenting Drug Calculations Charting Infusion ProgressUsing the Titration Table Titr.Table VueLink Modules Module Type Max External Devices Wave Numeric Changing VueLink Waves and Numerics Displayed Connecting an External DeviceSetup Device Name menu, select Show Device Data Viewing the VueLink Device Data Window Switching VueLink On and Off Using VueLink ScreensAlarms/INOPs From External Devices Language Conflict with External Device Drivers Select Main Setup Timers Using TimersViewing Timers Notification Timer Types Timer Setup Pop-up KeysSetting Up Timers Timer Label Select Change Numeric Select Any Timer Displaying Timers On The Main ScreenTimer Counting Direction Run Time Displaying a Clock On The Main Screen Main Screen Timer Pop-up KeysSetup Label Respiratory Loops Viewing Loops Capturing and Deleting Loops Select Main SetupShowing/Hiding Loops Setup VueLink Device menu Using the Loops CursorSetting Up Source Device Changing Loops Display Size Documenting Loops Care and Cleaning General Points Cleaning Monitoring Accessories CleaningDisinfecting Cleaning the Batteries and Battery Compartment Cleaning the Recorder Printhead M1116B onlySterilizing 296 Using the Batteries MP20/MP30 one or two Philips Battery LED Battery Power IndicatorsBattery Status on the Main Screen Battery status symbols Viewing Individual Battery Status Checking Battery ChargeBattery Status Window Recording Battery Status Optimizing Battery Performance Replacing Batteries Conditioning Batteries Display Brightness SettingCharging Batteries Unequally-Charged Batteries Battery Safety Information 304 Inspecting the Equipment and Accessories Maintenance TroubleshootingInspecting the Cables and Cords Maintenance Task and Test Schedule Disposing of the Monitor TroubleshootingDisposing of Empty Calibration Gas Cylinders 308 Trunk Cables AccessoriesECG/Resp Accessories Electrode Cable Sets Electrode One Piece Cables Set Combiners and Organizers NBP AccessoriesReusable Cuff Kits Patient Category Adult/Pediatric Antimicrobial Coated Reusable cuffsNeonatal/Infant Cuffs Disposable, non-sterile Bladder Tubing Width SpO2 Accessories Invasive Pressure AccessoriesTransducer, accessories, sensor kits Required Philips disposable sensors. Not available in the USA Philips disposable sensors. Available worldwide MAX-A Extension / Adapter Cables for Philips and Nellcor Sensors Adapter Cable for Masimo sensors Temperature Accessories Right Heart Thermodilution Cardiac Output C.O. AccessoriesTranspulmonary Thermodilution Sidestream CO2 Accessories for M3014A Mainstream CO2 Accessories for M3014AMainstream CO2 Accessories for M3016A Spirometry Accessories Microstream CO2 AccessoriesMicrostream accessory selection flowchart EEG Accessories TcGas AccessoriesBIS Accessories Other BIS Accessories SvO2 AccessoriesBIS Sensors Recorder Accessories Intended Use Installation and SpecificationsIndication for Use BIS Manufacturer’s Information Manufacturer’s InformationAddress of the EU Authorized Representative Trademark Acknowledgement Symbols Symbols Connectors Installation Safety Information12V MP20/MP30 MP40/MP50 MP60/MP70 333 MP80/MP90 Bedside Adapter Wireless Network Adapter Altitude Setting Monitor Safety Specifications Product Physical SpecificationsH x D Comments 338 Monitor MP20, MP30 Condition Range Environmental SpecificationsMonitor MP40, MP50, MP60, MP70, MP80, MP90 Condition Range Monitor MP20, MP30, MP40, MP50, MP60, MP70, MP80, MP90 D80 Intelligent Display Condition Range Docking Station M8045A Condition Range Thermal Array Recorder Module M1116B Condition Range M4605A Battery SpecificationsRemote Alarm Device M8025A Condition Range Remote SpeedPoint M8026A Condition Range Monitor Performance Specifications MP20/30, MP40/50, MP60/70/80/90 Sounds IndicatorsMP20/MP30 Trends MMS M3001A Performance Specifications Trends Alarm signalReview Alarms D80 Intelligent Display Performance Specifications Monitor Interface Specifications Display Specifications MP70/MP80/MP90 IntelliVue 802.11 Bedside Adapter Wireless Network AdapterVideo Interface MP60 Sxga MP80, MP90 ECG/Arrhythmia/ST Performance Specifications Measurement SpecificationsECG/Arrhythmia/ST Extreme Tachy ECG/Arrhythmia/ST Alarm Specifications Range AdjustmentTime to Alarm for Extreme Brady Respiration Respiration Performance SpecificationsSpO2 SpO2 Performance Specifications NBP Performance Specifications Venipuncture Mode Inflation Inflation Pressure Adult Auto Mode Repetition TimesStat Mode Cycle Time Range Adjustment Systolic Invasive Pressure Performance Specifications Invasive Pressure and Pulse Temp Range Adjustment Delay PressureAlarms Temp M3015A Microstream CO2 Performance Specifications Microstream CO2 Humidity Correction Factor Operating Temperature M3014A Mainstream CO2 Performance SpecificationsM3014A Sidestream CO2 Performance Specifications Response Time M3016A Mainstream CO2 Performance Specifications Mainstream CO2 Humidity Correction Factor Spirometry Spirometry Performance SpecificationsInterfering Gas and Vapor Effects On CO2 Measurement Values Expired Volume Volume numericInspired Volume Whichever is greater CCO Performance Specifications Cardiac Output / Continuous Cardiac Output TcGas Performance Specifications TcGas SvO 2 Performance Specifications SvO2 EEG Performance Specifications Accessories Compliant with EMC Standards Safety and Performance TestsElectromagnetic Compatibility EMC Specifications Electromagnetic Emissions Electromagnetic Immunity Recommended Separation Distance 367 Fast Transients/Bursts Restart time Default Settings Appendix Alarm Default Settings ECG, Arrhythmia, and ST Default Settings 371 372 Pulse Default Settings SpO 2 Settings Factory Adult Factory Pedi Factory Neo Respiration Default SettingsSpO2 Default Settings SpO 2 Alarm Default Settings Adult Pediatric Neonatal NBP Default Settings Temperature Default Settings Invasive Pressure PAP Settings Invasive Pressure Default SettingsSettings Factory Adult Factory Pedi Factory Neo Cardiac Output Default Settings Spirometry Default Settings CO2 Default SettingsSpirometry Adult Pedi Neo Settings TcGas Settings Factory Adult TcGas Default SettingsSvO2 Default Settings SvO2 Settings EEG Settings Factory Adult Factory Pedi Factory Neo EEG Default SettingsBIS Default Settings Adult Pedi Neo VueLink Default Settings Device Alarms Ignored Color Green 382 EEG 322 Hospira Inc Timeout periods 113 yellow Cpap Resp DSC BIS Fast Marker input connector Preparing skin for ECG Pressure PVR/PVRI Re-triggering events Retrolental fibroplasia SpO2 Viewing 223 trends pop-up keys 225 trends priority list Module options 281 module setup Visible waves and numerics Xii

Philips MP20/30 BIS Manufacturer’s Information, Address of the EU Authorized Representative

Models: MP60/70/80/90 MP40/50 MP20/30

BIS Manufacturer’s Information

Address of the EU Authorized Representative:

MP60/70/80/90, MP40/50, MP20/30 specifications