Manuals / Philips / Personal Care / Medical Alarms

Philips MP60/70/80/90, MP20/30 Alarm Default Settings, ECG, Arrhythmia, and ST Default Settings

Models: MP60/70/80/90 MP40/50 MP20/30

1 414

Download 414 pages 13.83 Kb

Page 390

Image 390

35 Default Settings Appendix

Alarm Default Settings

Alarm Settings	Factory Default H10 / H20 / H40	H30 (deviations from H10/20/40)

Alarm Volume	5

Alarms Off	3 min.

Pause Al. 5min	Enabled

Pause Al. 10min	Enabled

Auto Alarms Off	Off

Alarm Off Reminder	Off

Visual Latching	Red & Yell	Red Only

Audible Latching	Red & Yell	Off

Alarm Reminder	On

Reminder Time	3 min

Alarm Sounds	Traditional

Red Alarm Interval	10 sec

Yel. Al. Interval	20 sec

Alarm Low	4	2

Red Alarm Volume	AlarmVol +2

Yell. Alarm Volume	AlarmVol +0

Inop Volume	AlarmVol +0

Auto Increase Vol.	2 Steps

Increase Vol Delay	20 sec

Keep Blinking	No

Relay 1 Sensitiv.	R & Y & I

Relay 2 Sensitiv.	Red & Yell

Relay 3 Sensitiv.	Red

Inop Relay Latency	5 sec

Yel. Relay Latency	2 sec

Alarm Text	Standard

No Centr Mon Min Vol	4

ECG, Arrhythmia, and ST Default Settings

ECG Settings	Factory defaults H10 / H20 / H40			H30 (deviations from H10/20/40)

	Adult	Pedi	Neo	Adult	Pedi	Neo
	Adult	Pedi	Neo	Adult	Pedi	Neo

High Limit	120 bpm	160bpm	200 bpm

Low Limit	50 bpm	75 bpm	100 bpm

Alarms	On

Alarm Source	HR			Auto

ECG	On

QRS Volume	1

370

Page 390

Image 390

Philips MP60/70/80/90, MP20/30, MP40/50 manual Alarm Default Settings, ECG, Arrhythmia, and ST Default Settings

MP60/70/80/90, MP40/50, MP20/30 specifications

Philips MP20/30, MP40/50, and MP60/70/80/90 are advanced patient monitoring systems designed to enhance clinical workflows and patient care in diverse healthcare settings. These devices combine cutting-edge technologies and user-friendly interfaces, making them essential tools for hospitals and healthcare providers.

The MP20 and MP30 are notable for their compact design, making them ideal for environments where space is limited. They come equipped with a variety of monitoring parameters, including ECG, SpO2, and non-invasive blood pressure, providing a comprehensive overview of patient health. These models are particularly suited for use in general wards or recovery areas, offering reliability and ease of use.

Moving to the MP40 and MP50, these monitors incorporate more advanced functionalities, including multi-gas monitoring, which is vital for anesthetic applications. They feature a robust data storage capacity, allowing for extensive patient history tracking and improved decision-making capabilities. The intuitive touchscreen interfaces facilitate quick access to essential information, enabling healthcare professionals to respond efficiently to changes in a patient's condition.

The MP60, MP70, MP80, and MP90 series represent the pinnacle of Philips' patient monitoring technology. These monitors are equipped with advanced algorithms that enhance the precision of vital sign measurements, including advanced ECG analysis capabilities that assist in detecting arrhythmias. The MP80 and MP90 models further integrate advanced monitoring technologies such as 3D visualization for hemodynamics and deep learning algorithms for early warning systems.

Connectivity is a key feature across the Philips monitoring range, with many models offering seamless integration with hospital information systems and electronic health records. This connectivity ensures that patient data is easily accessible to clinicians, promoting informed decision-making. Moreover, alarm management features are designed to minimize false alarms, significantly improving the staff's response time by focusing on critical alerts.

In summary, Philips MP20/30, MP40/50, MP60/70/80/90 monitors deliver exceptional monitoring capabilities, combining user-friendly design with advanced technology. Their varied features allow them to cater to different clinical needs, enhancing patient care and supporting healthcare professionals in their critical roles. With these monitors, healthcare facilities can achieve a new standard in patient monitoring, ensuring quality and safety in patient management.

Contents

IntelliVue Patient Monitor M8000-9001G Table Of Contents What’s New? Patient Alarms and INOPs ECG, Arrhythmia, and ST Monitoring Capture 12-Lead Monitoring Pulse Rate Monitoring SpO2 Monitoring Invasive Pressure Monitoring Carbon Dioxide Monitoring tcGas Monitoring BIS Calculations Recording Using the Drug Calculator Respiratory Loops Accessories Default Settings Appendix TcGas Default Settings Basic Operation Introducing the IntelliVue FamilyIntelliVue MP20/MP30 AC Power LED MP20/MP30 Major Parts and KeysMP20/MP30 left side MP20/MP30 front panel IntelliVue MP40/MP50 MP40/MP50 Major Parts and KeysMP40/MP50 left side IntelliVue MP60/MP70 MP40/MP50 front panelMP60/MP70 Major Parts and Keys IntelliVue MP80/MP90D80 Intelligent Display Remote Alarm DeviceMP80/MP90 Major Parts and Keys Display UnitRelated Products Docking StationFlexible Module Server M8048A Measurement Modules Multi-Measurement Server M3001A Example Module PressureM3001A Connectors and Symbols Measurement Server ExtensionsM3014A, M3015A and M3016A Capnography Extensions M3014A Capnography M3016A MainstreamM3012A Hemodynamic Measurement Server Extension M3012A HemodynamicEnter Main Setup menu Operating and NavigatingMonitor information line Other screen elements Selecting Screen Elements Using the Setup MenuUsing the Touchscreen Disabling Touchscreen OperationUsing the SpeedPoint Follows the Silence permanent key configurationUsing Keys Using the Navigation PointUsing a Mouse or Trackball Permanent KeysSmartKeys Hardkeys Pop-Up KeysUsing the On-Screen Keyboard Using the On-Screen CalculatorMC MR M+ Back √ C/CE Standby Mode Select Main Setup, followed by Monitor StandbyOperating Modes Switching to a Different Screen Changing a Screen’s ContentUnderstanding Screens Using Additional Displays Change Screen menuWaves a Split Screen a Loops Cardiac Output Vital Signs a Monitor Settings Using the Visitor ScreenMeasurement Settings Understanding ProfilesSwapping a Complete Profile Measurement a Measurement B Measurement C Measurement DDefault Profile Understanding SettingsSwapping a Settings Block Changing Measurement SettingsAdjusting a Measurement Wave Switching a Measurement On and OffSwitching Numerics On and Off Changing Wave SpeedsFreezing An Individual Wave Freezing WavesChanging Wave Speed for a Channel Freezing All WavesUsing Labels Labels are shown in red Resolving Label ConflictsConflicting measurement De-activated labels are Grayed-outAdjusting Touch Tone Volume Changing Monitor SettingsAdjusting the Screen Brightness Setting the Date and TimeChecking Your Monitor Revision Switching OnSetting up the Measurement Servers and Modules Getting StartedMonitoring After a Power Failure Disconnecting from PowerUsing Remote Applications Networked MonitoringPop-Up Keys Selecting this pop-up key lets you Remote Application Popup KeysRemote Applications SmartKey AgainWhat’s New? What’s New in Release D.0?What’s New in Release C.0? What’s New in Release B.1? What’s New in Release B.0? What’s New in Release A.2? What’s New in Release A.2? Alarms ↑ ** HR HighVisual Alarm Indicators Audible Alarm IndicatorsAlarm Tone Configuration Traditional Audible Alarms HP/Agilent/Philips/Carenet Changing the Alarm Tone VolumeMinimum Volume for No Central Monitoring Inop ISO/IEC Standard 9703-2 Audible AlarmsAlarm Reminder ReAlarm Acknowledging AlarmsPausing or Switching Off Alarms Select Main Setup -Alarm SettingsTo Switch Individual Measurement Alarms On or Off To Pause All AlarmsTo Switch All Alarms Off While Alarms are Paused or OffResetting Arrhythmia Alarm Timeouts Alarm LimitsRestarting Paused Alarms Extending the Alarm Pause TimeViewing All Alarm Limits Changing Alarm Limits AlarmsOn/Off Alarm limits About Automatic Alarm Limits AutoLimitsDocumenting Alarm Limits Measurement valueReview Alarms Window Reviewing AlarmsAlarm Messages Window Alarm Review Pause Al Limits Alarms Min 10 MinUnderstanding Alarm Messages Latching AlarmsViewing the Alarm Latching Settings Testing Alarms Alarm Behavior at On/OffAlarm Latching Behavior Patient Alarms and INOPs Patient Alarm MessagesAlarm Message From Condition Indication CPP High CCO/CCI HighCCO/CCI LOW CPP LOWIrregular HR HR HighHR LOW Missed BeatPacer NT NON-SUSTAIN VTPacer not Capt PacingRR High RR LOWST Multi Vent FIB/TACH AlarmVent Bigeminy Vent RhythmTechnical Alarm Messages INOPs Inop Message, Indication Source What to doBIS Cable Usage BIS DSC UpdateBIS Cable Incompat BIS DSC DisconnBIS Overcurrent BIS Isoelectrc EEGBIS Lead OFF BIS Sensor DisconnCCI no BSA Cannot Analyze ECGCannot Analyze ST CCO BAD Press SignCCO Pulse Overrang CCO Press InvalidCCO Press Overrang CCO RecalibrateCO2 Auto Zero CO2 CAL ModeLead OFF CO2 CAL RunningEquip Malf CO2 Update FWCO2 Check CAL CO2 Equip MalfCO2 Zero Running CO2 Zero FailedCO2 Zero Required CPP CHK SourcesEEG Line Noise Eegx Lead OFFEegx Leads OFF EEG Muscle NoiseMMS Unplugged Leads OFFLL Lead OFF MMS UnsupportedNBP Interrupted SignalPPV BAD Signal NBP Measure FailedPulsatile MalfTransducer OverrangeSpiro Alarms Suppr Some ECG Alarms OFFSpiro Upgrade Resp ErraticSpO2 label Deactivated SpO2 label EXTD. UpdateSpO2 Label Poor Signal SpO2 label Equip MalfConfiguration Label UpgradeCAL Mode CAL FailedSVR/SVRI SET CVP Used SVR/SVRI CHK SourcesSVR/SVRI CHK Units CAL RequirdNo Transduc StabilizingSetup CableConf Managing Patients Admitting a PatientQuick Admitting a Patient Patient Category and Paced StatusAdmitting a Centrally-Monitored Patient Editing Patient Information Discharging a PatientTransferring Patients Transferring a Centrally-Monitored PatientMMS Trend Upload and MMS Settings Upload Data Upload from an MMSTransferring a Patient with an MMS no Central Station Data Exchange Between Information Centers Resolving Patient Information MismatchManually Resolving Patient Mismatch Patient Mismatch If One Set of Patient Data is Correct Patient Mismatch If Neither Patient Data Set is CorrectPatient Mismatch If Both Patient Data Sets Are Correct Care GroupsAutomatically Resolving Patient Mismatch Patient Information This information is taken fromUnderstanding the Care Group Overview Bar Depending on space availableMain Setup menu, select My Care Group Viewing the My Care Group Window110 Viewing the Other Bed WindowCare Group Alarms Visual Alarm Status Information in the Other Bed WindowOther Bed Pop-Up Keys Unpairing a Telemetry Device Telemetry Data OverviewUsing Standby Silencing Telemetry Alarms from the BedsideSuspending Telemetry Alarms Telemetry Data Overview Screen ElementSkin Preparation for Electrode Placement Connecting ECG CablesECG, Arrhythmia, and ST Monitoring Selecting the Primary and Secondary ECG Leads Checking Paced StatusUnderstanding the ECG Display Monitoring Paced PatientsAvoiding Pace Pulse Repolarization Tails Setting the Paced Status Pace Pulse RejectionChanging the Size of the ECG Wave To Change the Size of an Individual ECG WaveChanging the Volume of the QRS Tone Changing the ECG Filter SettingsTo Change the Size of all the ECG Waves ECG Leads Monitored Choosing Easi or Standard Lead PlacementAbout ECG Leads Changing Lead SetsECG Lead Placements ECG Lead FallbackElectrode labels Electrode colors Standard 3-Lead Placement Standard 5-Lead PlacementChest Electrode Placement Lead Placement Conventional 12-Lead ECGChoosing Standard or Modified Electrode Placement Labelling 12-Lead ECG ReportsModified 12-Lead ECG Easi ECG Lead Placement When Mod. LeadPlacement is set to OffCapture 12-Lead On the lower sternum at the level ECG, Arrhythmia, and ST Alarm Overview Using ECG Alarms ECG Safety Information106 Where Can I Find More Information? About Arrhythmia MonitoringArrhythmia Options Aberrantly-Conducted Beats Switching Arrhythmia Analysis On and OffChoosing an ECG Lead for Arrhythmia Monitoring Atrial Fibrillation and FlutterViewing Arrhythmia Waves Understanding the Arrhythmia DisplayIntermittent Bundle Branch Block Arrhythmia Beat LabelsArrhythmia Status Messages Rhythm Status MessagesDescription Or E Ectopic Status Messages Arrhythmia RelearningInitiating Arrhythmia Relearning Manually Explanation Or EArrhythmia Alarms Automatic Arrhythmia RelearnArrhythmia Relearn and Lead Fallback Switching Individual Arrhythmia Alarms On and Off Yellow Arrhythmia AlarmsArrhythmia Alarms and Latching Switching All Yellow Arrhythmia Alarms On or OffResetting the Timeout Period How are Yellow Arrhythmia Alarms Indicated?What is a Timeout Period? Behavior of Unsilenced Arrhythmia AlarmsPVC Alarms Chain Arrhythmia Alarm ChainingRed Arrhythmia Alarms Yellow Arrhythmia Alarms Beat Detection Alarms ChainRun PVCs Understanding PVC-Related AlarmsNon-Sustain Tach Pair PVCsSwitching ST On and Off About ST MonitoringSelecting ST Leads for Analysis Understanding the ST Display ST-II ST-V ST-aVRUpdating ST Baseline Snippets Recording ST SegmentsAdjusting ST Measurement Points About the ST Measurement PointsST-I ISO Point ST Point J+60Changing ST Alarm Limits ST AlarmsSingle- or Multi-lead ST Alarming Viewing ST MapsTrend View ST Map CurrentViewing an ST Map Switching Between ST Map ViewsSetup ST Analysis menu, select ST Map Working in the ST Map Task WindowChanging the Scale of the ST Map Displaying an ST Reference BaselineUpdating an ST Map Reference Baseline Changing the Trending Interval126 Entering the Setup Pulse Menu Monitoring Pulse RateSystem Pulse Source Selecting the Active Alarm Source HR or Pulse? Switching Pulse On and OffUsing Pulse Alarms Setup SpO2 menuAlarm Source Selection Disabled Changing HR/Pulse Alarm LimitsQRS Tone 130 Lead Placement for Monitoring Resp Optimizing Lead Placement for RespCardiac Overlay Changing Resp Detection Modes Auto Detection ModeUnderstanding the Resp Display Lateral Chest ExpansionManual Detection Mode Changing the Size of the Respiration WaveResp Detection Modes and Cardiac Overlay Resp Safety Information Using Resp AlarmsChanging the Apnea Alarm Delay Changing the Speed of the Respiration Wave135 136 Monitoring SpO2 SpO2 SensorsApplying the Sensor Connecting SpO2 Cables Measuring SpO2Assessing a Suspicious SpO2 Reading Adjusting the Alarm Limits Understanding SpO2 AlarmsAlarm Delays Adjusting the Desat Limit AlarmSetting Up Tone Modulation Perfusion Pleth IndicatorSetting SpO2/Pleth as Pulse Source Setting the QRS VolumeChoose the second measurement source Monitoring NBP Introducing the Oscillometric NBP MeasurementMeasurement Methods Preparing to Measure NBPMeasurement Limitations Reference MethodCorrecting the Measurement if Limb is not at Heart Level Understanding the NBP NumericsEnabling Automatic Mode and Setting Repetition Time Starting and Stopping MeasurementsCalibrating NBP Choosing the NBP Alarm SourceAssisting Venous Puncture Menu option Pressure value monitored148 Monitoring Temperature Selecting a Temperature for MonitoringMaking a Temp Measurement Extended Temperature Label Set Calculating Temp DifferenceSetting up the Pressure Measurement Monitoring Invasive PressureExtended Pressure Label Set Zeroing the Pressure TransducerSelecting a Pressure for Monitoring Label DescriptionDetermining a Pressure’s Most Recent Zero Using the Zero HardkeyZeroing ICP or IC1/IC2 Zeroing a Pressure MeasurementDisplaying a Mean Pressure Value Only Adjusting the Calibration FactorTroubleshooting the Zero Changing the Pressure Wave ScaleChoosing the Pressure Alarm Source Optimizing the WaveformNon-Physiological Artifact Suppression Calibrating Reusable Transducer CPJ840J6 Making the Pressure CalibrationTroubleshooting the Pressure Calibration Calculating Cerebral PerfusionCalculating Pulse Pressure Variation Measuring Pulmonary Artery Wedge Pressure Editing the Wedge Identifying the Pressure Analog Output Connector Monitoring Cardiac Output Hemodynamic Parameters Using the C.O. Procedure Window Cardiac Output TranspulmonaryEntering the HemoCalc Window Accessing the Setup C.O. and Setup CCO MenusMeasuring C. O. Using the PiCCO Method Measuring Continuous Cardiac OutputSetting Up the PiCCO C.O. Measurement CVPPerforming PiCCO C.O. Measurements Editing PiCCO C.O. MeasurementsCCO Calibration Status Indicators Saving and Calibrating PiCCO C.O. MeasurementsMeasuring C.O. Using the Right Heart Thermodilution Method Setting up RH C.O. MeasurementsIce-Bath Setup for RH Thermodilution C.O. Measurements Performing RH C.O. Measurements Setting the Computation ConstantDocumenting C.O. Measurements Editing and Saving RH C.O. MeasurementsInjectate Guidelines Injectate Volume, Patient Weight and Etvi Values PiCCO OnlyCold Injectate Room Temperature Injectate Etvi Etvi ≥ Guidelines for Right Heart Thermodilution C.O. InjectateCCO Curve Alert Messages Possible CausesCCO Prompt Messages CCO Prompt Messages Possible CausesCCO Warning Messages Possible Causes CCO Safety InformationCCO Warning Messages O. module or measurement server extension has been plugged174 Monitoring Carbon Dioxide Using the Capnography Extension M3014A Preparing to Measure Mainstream CO2Preparing to Measure Sidestream CO2 Using the Sidestream Sensor Holder Using the Mainstream CO2 Extension M3016A Checking Transducer AccuracyRemoving Exhaust Gases from the System Calibrating the Transducer Attaching and Removing the CO2 TransducerUsing the Microstream CO2 Extension M3015A Using Microstream AccessoriesPreparing to Measure Microstream CO2 Using the FilterLine and Airway Adapter Removing Exhaust Gases from the SystemSetting up CO2 Corrections Setting up Mainstream and Sidestream CO2Adjusting the CO2 Wave Scale Suppressing Zero CalibrationDeriving Alarms From awRR Changing CO2 AlarmsChanging the Apnea Alarm Delay Changing awRR Alarm Limits185 186 Monitoring Airway Flow, Volume and Pressure Attaching the Flow Sensor 189 Zero Calibration Automatic PurgingManual Purging Adult ModeIncorrect Balance Gas Setting N2O instead of N2 Gas CompensationAlarms and Alarm Limits Setting up SpirometryOptimizing Scale Settings Changing the Apnea Alarm DelaySetup Spirometry menu, select Gas Compensation Setting the Gas Compensation ModeAutomatic Alarm Suppression Choosing Measured AWV ComponentsChanging the Temperature of the Inspired Gas Monitoring tcGas Identifying tcGas Module ComponentsSetting the tcGas Sensor Temperature Using the tcGas Site TimerSetting the tcGas Site Timer Disabling the tcGas Site Timer Setting the tcGas Barometric PressureRestarting the tcGas SiteTimer Remembraning the tcGas TransducerNew/Dried Out Transducers Storing tcGas TransducersCalibrating the tcGas Transducer Troubleshooting tcGas Calibration Calibration FailureApplying the tcGas Transducer Finishing tcGas Monitoring TcGas CorrectionsMonitoring SvO2 Preparing to Monitor SvO2 Carrying out a Pre-insertion CalibrationInserting the Catheter Performing a Light Intensity CalibrationCalculating Oxygen Extraction Setting Up the In-Vivo CalibrationPerforming In-Vivo Calibration Making the In-Vivo CalibrationPercentage of total power in each frequency band Monitoring EEGEEG Montage SmartKey EEG Monitoring SetupUsing the EEG Impedance/Montage Window KOhm ImpedanceLimit5kOhm EEG 1 F3-P3 EEG 2 F4-P4Montage Name Choosing an EEG Electrode MontageChanging the Impedance Limit Label1Impedance Indicators About Electrode-to-Skin ImpedanceAbout Compressed Spectral Arrays CSA CSA contains the following informationSwitching EEG Numerics On and Off Changing EEG SettingsChanging CSA Settings Changing the Scale of the EEG Waves for DisplayChanging the Speed of the EEG Wave EEG ReportsChanging Filter Frequencies CSA on ReportEEG Safety Information EEG and Electrical InterferenceMonitoring BIS BIS Monitoring Setup Monitoring BIS Using the DSC and BIS EngineAspect BIS Sensor Aspect BISx 185-0145-PH Monitoring BIS using the BISxBoard With sensors for single-patient useManufacturer’s Information BIS Continuous Impedance CheckBIS Cyclic Impedance Check Starting a Cyclic Impedance CheckBIS Impedance Indicators Symbol Color ActionBIS Window Changing the BIS Smoothing Rate Switching BIS and Individual Numerics On and OffSwitching BIS Filters On or Off Changing the Scale of the EEG WaveBIS Safety Information 222 Trends Viewing TrendsViewing Graphic Trends Viewing Vital Signs TrendsSetting Up Trends Trends Pop-Up KeysMaking Segment Settings Trend Priority Trend GroupsTrend Interval Trend Parameter ScalesDocumenting Trends Graphical Trend PresentationAperiodic Trends Database Trends DatabasesScreen Trends Trending Multiple-Value MeasurementsSetting the Screen Trend Time Changing the Screen Trend View Changing the Selection of Screen Trends DisplayedActivating the Cursor for Screen Trends Tabular ViewSetting the Horizon Setting the Horizon Trend ScaleHorizon View Calculations Viewing CalculationsHemodynamic Oxygenation Ventilation Calculations Windows Calculations Pop-Up KeysReviewing Calculations Performing CalculationsAutomatic Unit Conversion Entering Values for CalculationsAutomatic Value Substitution Manual Unit ConversionDocumenting Calculations 238 Hi-Res Trend Wave Scales High Resolution Trend WavesChanging the Hi-Res Trend Waves Displayed Hi-Res Trend Waves and OxyCRGPrinting Hi-Res Trend Wave Reports Hi-Res Trend Wave RecordingsRecordings Basic Event Event SurveillanceLevels of Event Surveillance Surveillance Advanced Event SurveillanceEvent Groups Event EpisodesOpen the Event Episode window to review the selected event Events Pop-Up KeysEvent Episode Types Pre-time Post-time DetailEvent Triggers SpO2 RespABP Setting Triggers for NER and Basic Event Surveillance Event RetriggeringEvent Notification For each Triggering Events ManuallySet the event trigger HR PulseEvents Database Viewing EventsEvent Counter Counting Combi-Events Counting Neonatal Event Review NER EventsAD21 BD71 AB D 11 D6 M0 Event Summary Window Event Review WindowEvent Episode Window ApneaAnnotating Events Documenting EventsDocumenting Event Review Documenting an Event Episode Event RecordingsEvent Review Recordings Plet Event ReportsEvent Episode Recordings ResEvent Review Reports Event Episode Reports Event Summary Reports256 Recording Stop key Stops the current recordingStarting and Stopping Recordings Quickstarting RecordingsStopping Recordings Overview of Recording TypesExtending Recordings Recording Without a TemplateAll ECG Waves Recordings Creating and Changing Recordings TemplatesSetup Recording menu select General Select ECG Gain Changing ECG Wave GainRecording Priorities Sample Recording StripRecording Strip Code Recorded Waveforms Maintaining Recording StripsCode Meaning Reloading Paper Recorder Status Messages Recorder Status Messages Explanation266 Report types Report contents How to start printing reports Printing Patient ReportsStarting Reports Printouts Stopping Reports Printouts Setting Up ReportsSetting Up ECG Reports LimitsSetting Up Vital Signs and Graphic Trend Reports Setting Up Auto ReportsSetting Up Individual Print Jobs Checking Printer SettingsDashed Lines on Reports Unavailable Printer Re-routing ReportsPrinter Status Messages Sample Report PrintoutsPrinter Status Message Possible causes and suggested action Alarm Limits Report Patient NameRealtime Report Cardiac Output Report ECG Reports Other ReportsECG Report type Available Formats Available Paper Sizes Using the Drug Calculator Accessing the Drug CalculatorPerforming Drug Calculations About the Rule of SixPerforming Calculations for a Non-Specific Drug Performing Calculations for a Specific Drug Drug CalculatorDocumenting Drug Calculations Charting Infusion ProgressUsing the Titration Table Titr.TableVueLink Modules Module Type Max External Devices Wave NumericChanging VueLink Waves and Numerics Displayed Connecting an External DeviceSetup Device Name menu, select Show Device Data Viewing the VueLink Device Data WindowUsing VueLink Screens Switching VueLink On and OffAlarms/INOPs From External Devices Language Conflict with External Device Drivers Select Main Setup Timers Using TimersViewing Timers NotificationTimer Types Timer Setup Pop-up KeysSetting Up Timers Timer LabelSelect Change Numeric Select Any Timer Displaying Timers On The Main ScreenTimer Counting Direction Run TimeDisplaying a Clock On The Main Screen Main Screen Timer Pop-up KeysSetup LabelRespiratory Loops Viewing LoopsSelect Main Setup Capturing and Deleting LoopsShowing/Hiding Loops Setup VueLink Device menu Using the Loops CursorSetting Up Source Device Changing Loops Display SizeDocumenting Loops Care and Cleaning General PointsCleaning Cleaning Monitoring AccessoriesDisinfecting Cleaning the Recorder Printhead M1116B only Cleaning the Batteries and Battery CompartmentSterilizing 296 Using the Batteries MP20/MP30 one or two PhilipsBattery Power Indicators Battery LEDBattery Status on the Main Screen Battery status symbols Viewing Individual Battery Status Checking Battery ChargeBattery Status Window Recording Battery StatusOptimizing Battery Performance Replacing BatteriesConditioning Batteries Display Brightness SettingCharging Batteries Unequally-Charged BatteriesBattery Safety Information 304 Maintenance Troubleshooting Inspecting the Equipment and AccessoriesInspecting the Cables and Cords Maintenance Task and Test Schedule Troubleshooting Disposing of the MonitorDisposing of Empty Calibration Gas Cylinders 308 Trunk Cables AccessoriesECG/Resp Accessories Electrode Cable SetsElectrode One Piece Cables NBP Accessories Set Combiners and OrganizersReusable Cuff Kits Patient Category Adult/Pediatric Antimicrobial Coated Reusable cuffsNeonatal/Infant Cuffs Disposable, non-sterile Bladder Tubing WidthInvasive Pressure Accessories SpO2 AccessoriesTransducer, accessories, sensor kits Required Philips disposable sensors. Not available in the USA Philips disposable sensors. Available worldwideMAX-A Extension / Adapter Cables for Philips and Nellcor Sensors Adapter Cable for Masimo sensorsTemperature Accessories Cardiac Output C.O. Accessories Right Heart ThermodilutionTranspulmonary Thermodilution Mainstream CO2 Accessories for M3014A Sidestream CO2 Accessories for M3014AMainstream CO2 Accessories for M3016A Microstream CO2 Accessories Spirometry AccessoriesMicrostream accessory selection flowchart TcGas Accessories EEG AccessoriesBIS Accessories SvO2 Accessories Other BIS AccessoriesBIS Sensors Recorder Accessories Installation and Specifications Intended UseIndication for Use Manufacturer’s Information BIS Manufacturer’s InformationAddress of the EU Authorized Representative Trademark Acknowledgement Symbols SymbolsInstallation Safety Information Connectors12V MP20/MP30 MP40/MP50 MP60/MP70 333 MP80/MP90 Bedside Adapter Wireless Network Adapter Altitude Setting Monitor Safety SpecificationsPhysical Specifications ProductH x D Comments 338 Monitor MP20, MP30 Condition Range Environmental SpecificationsMonitor MP40, MP50, MP60, MP70, MP80, MP90 Condition Range Monitor MP20, MP30, MP40, MP50, MP60, MP70, MP80, MP90D80 Intelligent Display Condition Range Docking Station M8045A Condition RangeThermal Array Recorder Module M1116B Condition Range M4605A Battery SpecificationsRemote Alarm Device M8025A Condition Range Remote SpeedPoint M8026A Condition RangeMonitor Performance Specifications MP20/30, MP40/50, MP60/70/80/90Sounds IndicatorsMP20/MP30 TrendsMMS M3001A Performance Specifications Trends Alarm signalReview Alarms D80 Intelligent Display Performance SpecificationsMonitor Interface Specifications Display Specifications MP70/MP80/MP90 IntelliVue 802.11 Bedside Adapter Wireless Network AdapterVideo Interface MP60 Sxga MP80, MP90Measurement Specifications ECG/Arrhythmia/ST Performance SpecificationsECG/Arrhythmia/ST Extreme Tachy ECG/Arrhythmia/ST Alarm Specifications Range AdjustmentTime to Alarm for Extreme BradyRespiration Performance Specifications RespirationSpO2 SpO2 Performance Specifications NBP Performance Specifications Venipuncture Mode Inflation Inflation Pressure Adult Auto Mode Repetition TimesStat Mode Cycle Time Range Adjustment SystolicInvasive Pressure Performance Specifications Invasive Pressure and PulseTemp Range Adjustment Delay PressureAlarms TempM3015A Microstream CO2 Performance Specifications Microstream CO2 Humidity Correction FactorOperating Temperature M3014A Mainstream CO2 Performance SpecificationsM3014A Sidestream CO2 Performance Specifications Response TimeM3016A Mainstream CO2 Performance Specifications Mainstream CO2 Humidity Correction FactorSpirometry Performance Specifications SpirometryInterfering Gas and Vapor Effects On CO2 Measurement Values Expired Volume Volume numericInspired Volume Whichever is greaterCCO Performance Specifications Cardiac Output / Continuous Cardiac OutputTcGas Performance Specifications TcGasSvO 2 Performance Specifications SvO2EEG Performance Specifications Accessories Compliant with EMC Standards Safety and Performance TestsElectromagnetic Compatibility EMC Specifications Electromagnetic EmissionsElectromagnetic Immunity Recommended Separation Distance367 Fast Transients/Bursts Restart timeDefault Settings Appendix Alarm Default Settings ECG, Arrhythmia, and ST Default Settings371 372 Pulse Default Settings SpO 2 Settings Factory Adult Factory Pedi Factory Neo Respiration Default SettingsSpO2 Default Settings SpO 2 Alarm Default Settings Adult Pediatric NeonatalNBP Default Settings Temperature Default SettingsInvasive Pressure Default Settings Invasive Pressure PAP SettingsSettings Factory Adult Factory Pedi Factory Neo Cardiac Output Default Settings CO2 Default Settings Spirometry Default SettingsSpirometry Adult Pedi Neo Settings TcGas Settings Factory Adult TcGas Default SettingsSvO2 Default Settings SvO2 SettingsEEG Settings Factory Adult Factory Pedi Factory Neo EEG Default SettingsBIS Default Settings Adult Pedi NeoVueLink Default Settings Device Alarms Ignored Color Green382 EEG 322 Hospira Inc Timeout periods 113 yellow Cpap Resp DSC BIS Fast Marker input connector Preparing skin for ECG Pressure PVR/PVRI Re-triggering events Retrolental fibroplasia SpO2 Viewing 223 trends pop-up keys 225 trends priority list Module options 281 module setup Visible waves and numerics Xii