Cardiac Output Default Settings

35 Default Settings Appendix

Invasive Pressure

PAP Settings

ICP, IC1, IC2 Settings

Settings

Factory Adult

Factory Pedi

Factory Neo

Factory Adult

Factory Pedi

Factory Neo

Mean Only

Yes

Filter

12 Hz

Mercury Cal.

Yes

Artifact Suppr.

60 sec

Unit

mmHg

Color

Yellow

Magenta

C.O. Settings

Factory defaults H10 / H20 / H40

H30 (deviations from H10/20/40)

Adult

Pedi

Neo

Adult

Pedi

Neo

Auto-Calibration

Tblood High Limit

39.0 ºC

Tblood Low Limit

36.0 ºC

Tblood Alarm On/Off

Temperature Unit

Color

Green

Yellow

CCO/CCI Settings

Factory Adult

Factory Pedi

Factory Neo

Settings common to CCO and CCI

Alarms from

CCO

CCO from

ABP

Color

Green

CCO

Alarms

CCO High Limit

8.5 l/min

3.7 l/min

1.3 l/min

CCO Low Limit

4.0 l/min

2.6 l/min

0.3 l/min

CCI

Alarms

CCI High Limit

4.3 l/min/m2

3.7 l/min/m2

5.2 l/min/m2

CCI Low Limit

2.0 l/min/m2

2.6 l/min/m2

1.2 l/min/m2

377

Page 397

Image 397

Philips MP20/30, MP60/70/80/90, MP40/50 manual Cardiac Output Default Settings

MP60/70/80/90, MP40/50, MP20/30 specifications

Philips MP20/30, MP40/50, and MP60/70/80/90 are advanced patient monitoring systems designed to enhance clinical workflows and patient care in diverse healthcare settings. These devices combine cutting-edge technologies and user-friendly interfaces, making them essential tools for hospitals and healthcare providers.

The MP20 and MP30 are notable for their compact design, making them ideal for environments where space is limited. They come equipped with a variety of monitoring parameters, including ECG, SpO2, and non-invasive blood pressure, providing a comprehensive overview of patient health. These models are particularly suited for use in general wards or recovery areas, offering reliability and ease of use.

Moving to the MP40 and MP50, these monitors incorporate more advanced functionalities, including multi-gas monitoring, which is vital for anesthetic applications. They feature a robust data storage capacity, allowing for extensive patient history tracking and improved decision-making capabilities. The intuitive touchscreen interfaces facilitate quick access to essential information, enabling healthcare professionals to respond efficiently to changes in a patient's condition.

The MP60, MP70, MP80, and MP90 series represent the pinnacle of Philips' patient monitoring technology. These monitors are equipped with advanced algorithms that enhance the precision of vital sign measurements, including advanced ECG analysis capabilities that assist in detecting arrhythmias. The MP80 and MP90 models further integrate advanced monitoring technologies such as 3D visualization for hemodynamics and deep learning algorithms for early warning systems.

Connectivity is a key feature across the Philips monitoring range, with many models offering seamless integration with hospital information systems and electronic health records. This connectivity ensures that patient data is easily accessible to clinicians, promoting informed decision-making. Moreover, alarm management features are designed to minimize false alarms, significantly improving the staff's response time by focusing on critical alerts.

In summary, Philips MP20/30, MP40/50, MP60/70/80/90 monitors deliver exceptional monitoring capabilities, combining user-friendly design with advanced technology. Their varied features allow them to cater to different clinical needs, enhancing patient care and supporting healthcare professionals in their critical roles. With these monitors, healthcare facilities can achieve a new standard in patient monitoring, ensuring quality and safety in patient management.

Contents

IntelliVue Patient Monitor M8000-9001G Table Of Contents What’s New? Patient Alarms and INOPs ECG, Arrhythmia, and ST Monitoring Capture 12-Lead Monitoring Pulse Rate Monitoring SpO2 Monitoring Invasive Pressure Monitoring Carbon Dioxide Monitoring tcGas Monitoring BIS Calculations Recording Using the Drug Calculator Respiratory Loops Accessories Default Settings Appendix TcGas Default Settings Introducing the IntelliVue Family Basic Operation IntelliVue MP20/MP30 MP20/MP30 Major Parts and Keys AC Power LEDMP20/MP30 left side MP20/MP30 front panel MP40/MP50 Major Parts and Keys IntelliVue MP40/MP50MP40/MP50 left side MP40/MP50 front panel IntelliVue MP60/MP70 IntelliVue MP80/MP90 MP60/MP70 Major Parts and Keys MP80/MP90 Major Parts and Keys Remote Alarm DeviceD80 Intelligent Display Display Unit Docking Station Related ProductsFlexible Module Server M8048A Measurement Modules Example Module Pressure Multi-Measurement Server M3001A Measurement Server Extensions M3001A Connectors and Symbols M3014A Capnography M3016A Mainstream M3014A, M3015A and M3016A Capnography Extensions M3012A Hemodynamic M3012A Hemodynamic Measurement Server Extension Operating and Navigating Enter Main Setup menuMonitor information line Other screen elements Using the Touchscreen Using the Setup MenuSelecting Screen Elements Disabling Touchscreen Operation Follows the Silence permanent key configuration Using the SpeedPoint Using a Mouse or Trackball Using the Navigation PointUsing Keys Permanent Keys SmartKeys Pop-Up Keys Hardkeys Using the On-Screen Calculator Using the On-Screen KeyboardMC MR M+ Back √ C/CE Select Main Setup, followed by Monitor Standby Standby ModeOperating Modes Changing a Screen’s Content Switching to a Different ScreenUnderstanding Screens Change Screen menu Using Additional DisplaysWaves a Split Screen a Loops Cardiac Output Vital Signs a Measurement Settings Using the Visitor ScreenMonitor Settings Understanding Profiles Measurement a Measurement B Measurement C Measurement D Swapping a Complete Profile Swapping a Settings Block Understanding SettingsDefault Profile Changing Measurement Settings Switching Numerics On and Off Switching a Measurement On and OffAdjusting a Measurement Wave Changing Wave Speeds Changing Wave Speed for a Channel Freezing WavesFreezing An Individual Wave Freezing All Waves Using Labels Conflicting measurement Resolving Label ConflictsLabels are shown in red De-activated labels are Grayed-out Adjusting the Screen Brightness Changing Monitor SettingsAdjusting Touch Tone Volume Setting the Date and Time Setting up the Measurement Servers and Modules Switching OnChecking Your Monitor Revision Getting Started Using Remote Applications Disconnecting from PowerMonitoring After a Power Failure Networked Monitoring Remote Applications SmartKey Remote Application Popup KeysPop-Up Keys Selecting this pop-up key lets you Again What’s New in Release D.0? What’s New? What’s New in Release C.0? What’s New in Release B.1? What’s New in Release B.0? What’s New in Release A.2? What’s New in Release A.2? ↑ ** HR High Alarms Audible Alarm Indicators Visual Alarm IndicatorsAlarm Tone Configuration Minimum Volume for No Central Monitoring Inop Changing the Alarm Tone VolumeTraditional Audible Alarms HP/Agilent/Philips/Carenet ISO/IEC Standard 9703-2 Audible Alarms Pausing or Switching Off Alarms Acknowledging AlarmsAlarm Reminder ReAlarm Select Main Setup -Alarm Settings To Switch All Alarms Off To Pause All AlarmsTo Switch Individual Measurement Alarms On or Off While Alarms are Paused or Off Restarting Paused Alarms Alarm LimitsResetting Arrhythmia Alarm Timeouts Extending the Alarm Pause Time Viewing All Alarm Limits Alarms Changing Alarm LimitsOn/Off Documenting Alarm Limits About Automatic Alarm Limits AutoLimitsAlarm limits Measurement value Alarm Messages Window Reviewing AlarmsReview Alarms Window Alarm Review Pause Al Limits Alarms Min 10 Min Latching Alarms Understanding Alarm MessagesViewing the Alarm Latching Settings Alarm Behavior at On/Off Testing AlarmsAlarm Latching Behavior Patient Alarm Messages Patient Alarms and INOPsAlarm Message From Condition Indication CCO/CCI LOW CCO/CCI HighCPP High CPP LOW HR LOW HR HighIrregular HR Missed Beat Pacer not Capt NON-SUSTAIN VTPacer NT Pacing RR LOW RR HighST Multi Vent Bigeminy AlarmVent FIB/TACH Vent Rhythm Inop Message, Indication Source What to do Technical Alarm Messages INOPs BIS Cable Incompat BIS DSC UpdateBIS Cable Usage BIS DSC Disconn BIS Lead OFF BIS Isoelectrc EEGBIS Overcurrent BIS Sensor Disconn Cannot Analyze ST Cannot Analyze ECGCCI no BSA CCO BAD Press Sign CCO Press Overrang CCO Press InvalidCCO Pulse Overrang CCO Recalibrate Lead OFF CO2 CAL ModeCO2 Auto Zero CO2 CAL Running CO2 Check CAL CO2 Update FWEquip Malf CO2 Equip Malf CO2 Zero Required CO2 Zero FailedCO2 Zero Running CPP CHK Sources Eegx Leads OFF Eegx Lead OFFEEG Line Noise EEG Muscle Noise LL Lead OFF Leads OFFMMS Unplugged MMS Unsupported PPV BAD Signal SignalNBP Interrupted NBP Measure Failed Transducer MalfPulsatile Overrange Spiro Upgrade Some ECG Alarms OFFSpiro Alarms Suppr Resp Erratic SpO2 Label Poor Signal SpO2 label EXTD. UpdateSpO2 label Deactivated SpO2 label Equip Malf CAL Mode Label UpgradeConfiguration CAL Failed SVR/SVRI CHK Units SVR/SVRI CHK SourcesSVR/SVRI SET CVP Used CAL Requird Stabilizing No Transduc Cable SetupConf Admitting a Patient Managing Patients Patient Category and Paced Status Quick Admitting a PatientAdmitting a Centrally-Monitored Patient Discharging a Patient Editing Patient Information Transferring a Centrally-Monitored Patient Transferring Patients Data Upload from an MMS MMS Trend Upload and MMS Settings UploadTransferring a Patient with an MMS no Central Station Resolving Patient Information Mismatch Data Exchange Between Information CentersManually Resolving Patient Mismatch Patient Mismatch If Neither Patient Data Set is Correct Patient Mismatch If One Set of Patient Data is Correct Automatically Resolving Patient Mismatch Care GroupsPatient Mismatch If Both Patient Data Sets Are Correct Patient Information This information is taken from Depending on space available Understanding the Care Group Overview Bar Viewing the My Care Group Window Main Setup menu, select My Care Group Viewing the Other Bed Window 110 Visual Alarm Status Information in the Other Bed Window Care Group AlarmsOther Bed Pop-Up Keys Telemetry Data Overview Unpairing a Telemetry Device Suspending Telemetry Alarms Silencing Telemetry Alarms from the BedsideUsing Standby Telemetry Data Overview Screen Element Connecting ECG Cables Skin Preparation for Electrode PlacementECG, Arrhythmia, and ST Monitoring Checking Paced Status Selecting the Primary and Secondary ECG Leads Monitoring Paced Patients Understanding the ECG Display Changing the Size of the ECG Wave Setting the Paced Status Pace Pulse RejectionAvoiding Pace Pulse Repolarization Tails To Change the Size of an Individual ECG Wave Changing the ECG Filter Settings Changing the Volume of the QRS ToneTo Change the Size of all the ECG Waves About ECG Leads Choosing Easi or Standard Lead PlacementECG Leads Monitored Changing Lead Sets ECG Lead Fallback ECG Lead PlacementsElectrode labels Electrode colors Standard 5-Lead Placement Standard 3-Lead Placement Chest Electrode Placement Conventional 12-Lead ECG Lead Placement Labelling 12-Lead ECG Reports Choosing Standard or Modified Electrode PlacementModified 12-Lead ECG When Mod. LeadPlacement is set to Off Easi ECG Lead PlacementCapture 12-Lead On the lower sternum at the level ECG, Arrhythmia, and ST Alarm Overview ECG Safety Information Using ECG Alarms 106 About Arrhythmia Monitoring Where Can I Find More Information?Arrhythmia Options Choosing an ECG Lead for Arrhythmia Monitoring Switching Arrhythmia Analysis On and OffAberrantly-Conducted Beats Atrial Fibrillation and Flutter Intermittent Bundle Branch Block Understanding the Arrhythmia DisplayViewing Arrhythmia Waves Arrhythmia Beat Labels Rhythm Status Messages Arrhythmia Status MessagesDescription Or E Initiating Arrhythmia Relearning Manually Arrhythmia RelearningEctopic Status Messages Explanation Or E Automatic Arrhythmia Relearn Arrhythmia AlarmsArrhythmia Relearn and Lead Fallback Arrhythmia Alarms and Latching Yellow Arrhythmia AlarmsSwitching Individual Arrhythmia Alarms On and Off Switching All Yellow Arrhythmia Alarms On or Off What is a Timeout Period? How are Yellow Arrhythmia Alarms Indicated?Resetting the Timeout Period Behavior of Unsilenced Arrhythmia Alarms Red Arrhythmia Alarms Arrhythmia Alarm ChainingPVC Alarms Chain Yellow Arrhythmia Alarms Beat Detection Alarms Chain Non-Sustain Tach Understanding PVC-Related AlarmsRun PVCs Pair PVCs About ST Monitoring Switching ST On and OffSelecting ST Leads for Analysis ST-II ST-V ST-aVR Understanding the ST Display Recording ST Segments Updating ST Baseline Snippets About the ST Measurement Points Adjusting ST Measurement Points ISO Point ST Point J+60 ST-I Single- or Multi-lead ST Alarming ST AlarmsChanging ST Alarm Limits Viewing ST Maps ST Map Current Trend View Setup ST Analysis menu, select ST Map Switching Between ST Map ViewsViewing an ST Map Working in the ST Map Task Window Updating an ST Map Reference Baseline Displaying an ST Reference BaselineChanging the Scale of the ST Map Changing the Trending Interval 126 Monitoring Pulse Rate Entering the Setup Pulse MenuSystem Pulse Source Using Pulse Alarms Switching Pulse On and OffSelecting the Active Alarm Source HR or Pulse? Setup SpO2 menu Changing HR/Pulse Alarm Limits Alarm Source Selection DisabledQRS Tone 130 Optimizing Lead Placement for Resp Lead Placement for Monitoring RespCardiac Overlay Understanding the Resp Display Auto Detection ModeChanging Resp Detection Modes Lateral Chest Expansion Changing the Size of the Respiration Wave Manual Detection ModeResp Detection Modes and Cardiac Overlay Changing the Apnea Alarm Delay Using Resp AlarmsResp Safety Information Changing the Speed of the Respiration Wave 135 136 SpO2 Sensors Monitoring SpO2Applying the Sensor Measuring SpO2 Connecting SpO2 Cables Assessing a Suspicious SpO2 Reading Alarm Delays Understanding SpO2 AlarmsAdjusting the Alarm Limits Adjusting the Desat Limit Alarm Setting SpO2/Pleth as Pulse Source Perfusion Pleth IndicatorSetting Up Tone Modulation Setting the QRS Volume Choose the second measurement source Introducing the Oscillometric NBP Measurement Monitoring NBP Measurement Limitations Preparing to Measure NBPMeasurement Methods Reference Method Understanding the NBP Numerics Correcting the Measurement if Limb is not at Heart Level Starting and Stopping Measurements Enabling Automatic Mode and Setting Repetition Time Assisting Venous Puncture Choosing the NBP Alarm SourceCalibrating NBP Menu option Pressure value monitored 148 Selecting a Temperature for Monitoring Monitoring TemperatureMaking a Temp Measurement Calculating Temp Difference Extended Temperature Label Set Monitoring Invasive Pressure Setting up the Pressure Measurement Selecting a Pressure for Monitoring Zeroing the Pressure TransducerExtended Pressure Label Set Label Description Zeroing ICP or IC1/IC2 Using the Zero HardkeyDetermining a Pressure’s Most Recent Zero Zeroing a Pressure Measurement Troubleshooting the Zero Adjusting the Calibration FactorDisplaying a Mean Pressure Value Only Changing the Pressure Wave Scale Optimizing the Waveform Choosing the Pressure Alarm SourceNon-Physiological Artifact Suppression Making the Pressure Calibration Calibrating Reusable Transducer CPJ840J6 Calculating Cerebral Perfusion Troubleshooting the Pressure CalibrationCalculating Pulse Pressure Variation Measuring Pulmonary Artery Wedge Pressure Editing the Wedge Identifying the Pressure Analog Output Connector Monitoring Cardiac Output Hemodynamic Parameters Cardiac Output Transpulmonary Using the C.O. Procedure Window Measuring C. O. Using the PiCCO Method Accessing the Setup C.O. and Setup CCO MenusEntering the HemoCalc Window Measuring Continuous Cardiac Output CVP Setting Up the PiCCO C.O. Measurement Editing PiCCO C.O. Measurements Performing PiCCO C.O. Measurements Saving and Calibrating PiCCO C.O. Measurements CCO Calibration Status Indicators Setting up RH C.O. Measurements Measuring C.O. Using the Right Heart Thermodilution MethodIce-Bath Setup for RH Thermodilution C.O. Measurements Documenting C.O. Measurements Setting the Computation ConstantPerforming RH C.O. Measurements Editing and Saving RH C.O. Measurements Cold Injectate Room Temperature Injectate Etvi Etvi ≥ Injectate Volume, Patient Weight and Etvi Values PiCCO OnlyInjectate Guidelines Guidelines for Right Heart Thermodilution C.O. Injectate Possible Causes CCO Curve Alert Messages CCO Prompt Messages Possible Causes CCO Prompt Messages CCO Warning Messages CCO Safety InformationCCO Warning Messages Possible Causes O. module or measurement server extension has been plugged 174 Monitoring Carbon Dioxide Preparing to Measure Mainstream CO2 Using the Capnography Extension M3014A Preparing to Measure Sidestream CO2 Using the Sidestream Sensor Holder Checking Transducer Accuracy Using the Mainstream CO2 Extension M3016ARemoving Exhaust Gases from the System Attaching and Removing the CO2 Transducer Calibrating the Transducer Using Microstream Accessories Using the Microstream CO2 Extension M3015APreparing to Measure Microstream CO2 Removing Exhaust Gases from the System Using the FilterLine and Airway Adapter Adjusting the CO2 Wave Scale Setting up Mainstream and Sidestream CO2Setting up CO2 Corrections Suppressing Zero Calibration Changing the Apnea Alarm Delay Changing CO2 AlarmsDeriving Alarms From awRR Changing awRR Alarm Limits 185 186 Monitoring Airway Flow, Volume and Pressure Attaching the Flow Sensor 189 Automatic Purging Zero Calibration Incorrect Balance Gas Setting N2O instead of N2 Adult ModeManual Purging Gas Compensation Optimizing Scale Settings Setting up SpirometryAlarms and Alarm Limits Changing the Apnea Alarm Delay Automatic Alarm Suppression Setting the Gas Compensation ModeSetup Spirometry menu, select Gas Compensation Choosing Measured AWV Components Changing the Temperature of the Inspired Gas Identifying tcGas Module Components Monitoring tcGas Using the tcGas Site Timer Setting the tcGas Sensor TemperatureSetting the tcGas Site Timer Restarting the tcGas SiteTimer Setting the tcGas Barometric PressureDisabling the tcGas Site Timer Remembraning the tcGas Transducer Storing tcGas Transducers New/Dried Out Transducers Calibrating the tcGas Transducer Calibration Failure Troubleshooting tcGas Calibration Applying the tcGas Transducer TcGas Corrections Finishing tcGas Monitoring Monitoring SvO2 Carrying out a Pre-insertion Calibration Preparing to Monitor SvO2 Performing a Light Intensity Calibration Inserting the Catheter Performing In-Vivo Calibration Setting Up the In-Vivo CalibrationCalculating Oxygen Extraction Making the In-Vivo Calibration Monitoring EEG Percentage of total power in each frequency band Using the EEG Impedance/Montage Window EEG Monitoring SetupEEG Montage SmartKey KOhm ImpedanceLimit5kOhm EEG 1 F3-P3 EEG 2 F4-P4 Changing the Impedance Limit Choosing an EEG Electrode MontageMontage Name Label1 About Electrode-to-Skin Impedance Impedance Indicators CSA contains the following information About Compressed Spectral Arrays CSA Changing CSA Settings Changing EEG SettingsSwitching EEG Numerics On and Off Changing the Scale of the EEG Waves for Display Changing Filter Frequencies EEG ReportsChanging the Speed of the EEG Wave CSA on Report EEG and Electrical Interference EEG Safety Information Monitoring BIS Monitoring BIS Using the DSC and BIS Engine BIS Monitoring Setup Board Monitoring BIS using the BISxAspect BIS Sensor Aspect BISx 185-0145-PH With sensors for single-patient use BIS Cyclic Impedance Check BIS Continuous Impedance CheckManufacturer’s Information Starting a Cyclic Impedance Check Symbol Color Action BIS Impedance IndicatorsBIS Window Switching BIS Filters On or Off Switching BIS and Individual Numerics On and OffChanging the BIS Smoothing Rate Changing the Scale of the EEG Wave BIS Safety Information 222 Viewing Trends Trends Viewing Vital Signs Trends Viewing Graphic Trends Trends Pop-Up Keys Setting Up Trends Making Segment Settings Trend Interval Trend GroupsTrend Priority Trend Parameter Scales Graphical Trend Presentation Documenting Trends Screen Trends Trends DatabasesAperiodic Trends Database Trending Multiple-Value Measurements Setting the Screen Trend Time Activating the Cursor for Screen Trends Changing the Selection of Screen Trends DisplayedChanging the Screen Trend View Tabular View Setting the Horizon Trend Scale Setting the HorizonHorizon View Viewing Calculations CalculationsHemodynamic Oxygenation Ventilation Calculations Pop-Up Keys Calculations Windows Performing Calculations Reviewing Calculations Automatic Value Substitution Entering Values for CalculationsAutomatic Unit Conversion Manual Unit Conversion Documenting Calculations 238 Changing the Hi-Res Trend Waves Displayed High Resolution Trend WavesHi-Res Trend Wave Scales Hi-Res Trend Waves and OxyCRG Hi-Res Trend Wave Recordings Printing Hi-Res Trend Wave ReportsRecordings Levels of Event Surveillance Event SurveillanceBasic Event Surveillance Advanced Event Surveillance Event Episodes Event Groups Event Episode Types Pre-time Post-time Events Pop-Up KeysOpen the Event Episode window to review the selected event Detail SpO2 Resp Event TriggersABP Event Retriggering Setting Triggers for NER and Basic Event SurveillanceEvent Notification Set the event trigger Triggering Events ManuallyFor each HR Pulse Viewing Events Events DatabaseEvent Counter Counting Neonatal Event Review NER Events Counting Combi-EventsAD21 BD71 AB D 11 D6 M0 Event Review Window Event Summary Window Apnea Event Episode Window Documenting Events Annotating EventsDocumenting Event Review Event Recordings Documenting an Event EpisodeEvent Review Recordings Event Episode Recordings Event ReportsPlet Res Event Review Reports Event Summary Reports Event Episode Reports 256 Stop key Stops the current recording Recording Quickstarting Recordings Starting and Stopping Recordings Extending Recordings Overview of Recording TypesStopping Recordings Recording Without a Template Creating and Changing Recordings Templates All ECG Waves Recordings Changing ECG Wave Gain Setup Recording menu select General Select ECG Gain Sample Recording Strip Recording PrioritiesRecording Strip Code Maintaining Recording Strips Recorded WaveformsCode Meaning Reloading Paper Recorder Status Messages Explanation Recorder Status Messages 266 Printing Patient Reports Report types Report contents How to start printing reportsStarting Reports Printouts Setting Up ECG Reports Setting Up ReportsStopping Reports Printouts Limits Setting Up Auto Reports Setting Up Vital Signs and Graphic Trend Reports Checking Printer Settings Setting Up Individual Print Jobs Unavailable Printer Re-routing Reports Dashed Lines on Reports Sample Report Printouts Printer Status MessagesPrinter Status Message Possible causes and suggested action Patient Name Alarm Limits Report Realtime Report Cardiac Output Report Other Reports ECG ReportsECG Report type Available Formats Available Paper Sizes Accessing the Drug Calculator Using the Drug Calculator About the Rule of Six Performing Drug CalculationsPerforming Calculations for a Non-Specific Drug Drug Calculator Performing Calculations for a Specific Drug Using the Titration Table Charting Infusion ProgressDocumenting Drug Calculations Titr.Table Module Type Max External Devices Wave Numeric VueLink Modules Setup Device Name menu, select Show Device Data Connecting an External DeviceChanging VueLink Waves and Numerics Displayed Viewing the VueLink Device Data Window Switching VueLink On and Off Using VueLink ScreensAlarms/INOPs From External Devices Language Conflict with External Device Drivers Viewing Timers Using TimersSelect Main Setup Timers Notification Setting Up Timers Timer Setup Pop-up KeysTimer Types Timer Label Timer Counting Direction Displaying Timers On The Main ScreenSelect Change Numeric Select Any Timer Run Time Setup Main Screen Timer Pop-up KeysDisplaying a Clock On The Main Screen Label Viewing Loops Respiratory Loops Capturing and Deleting Loops Select Main SetupShowing/Hiding Loops Setting Up Source Device Using the Loops CursorSetup VueLink Device menu Changing Loops Display Size Documenting Loops General Points Care and Cleaning Cleaning Monitoring Accessories CleaningDisinfecting Cleaning the Batteries and Battery Compartment Cleaning the Recorder Printhead M1116B onlySterilizing 296 MP20/MP30 one or two Philips Using the Batteries Battery LED Battery Power IndicatorsBattery Status on the Main Screen Battery status symbols Battery Status Window Checking Battery ChargeViewing Individual Battery Status Recording Battery Status Replacing Batteries Optimizing Battery Performance Charging Batteries Display Brightness SettingConditioning Batteries Unequally-Charged Batteries Battery Safety Information 304 Inspecting the Equipment and Accessories Maintenance TroubleshootingInspecting the Cables and Cords Maintenance Task and Test Schedule Disposing of the Monitor TroubleshootingDisposing of Empty Calibration Gas Cylinders 308 ECG/Resp Accessories AccessoriesTrunk Cables Electrode Cable Sets Electrode One Piece Cables Set Combiners and Organizers NBP AccessoriesReusable Cuff Kits Neonatal/Infant Cuffs Disposable, non-sterile Adult/Pediatric Antimicrobial Coated Reusable cuffsPatient Category Bladder Tubing Width SpO2 Accessories Invasive Pressure AccessoriesTransducer, accessories, sensor kits Required Philips disposable sensors. Available worldwide Philips disposable sensors. Not available in the USA MAX-A Adapter Cable for Masimo sensors Extension / Adapter Cables for Philips and Nellcor Sensors Temperature Accessories Right Heart Thermodilution Cardiac Output C.O. AccessoriesTranspulmonary Thermodilution Sidestream CO2 Accessories for M3014A Mainstream CO2 Accessories for M3014AMainstream CO2 Accessories for M3016A Spirometry Accessories Microstream CO2 AccessoriesMicrostream accessory selection flowchart EEG Accessories TcGas AccessoriesBIS Accessories Other BIS Accessories SvO2 AccessoriesBIS Sensors Recorder Accessories Intended Use Installation and SpecificationsIndication for Use BIS Manufacturer’s Information Manufacturer’s InformationAddress of the EU Authorized Representative Trademark Acknowledgement Symbols Symbols Connectors Installation Safety Information12V MP20/MP30 MP40/MP50 MP60/MP70 333 MP80/MP90 Bedside Adapter Wireless Network Adapter Monitor Safety Specifications Altitude Setting Product Physical SpecificationsH x D Comments 338 Monitor MP40, MP50, MP60, MP70, MP80, MP90 Condition Range Environmental SpecificationsMonitor MP20, MP30 Condition Range Monitor MP20, MP30, MP40, MP50, MP60, MP70, MP80, MP90 Docking Station M8045A Condition Range D80 Intelligent Display Condition Range Remote Alarm Device M8025A Condition Range M4605A Battery SpecificationsThermal Array Recorder Module M1116B Condition Range Remote SpeedPoint M8026A Condition Range MP20/30, MP40/50, MP60/70/80/90 Monitor Performance Specifications MP20/MP30 IndicatorsSounds Trends Review Alarms Alarm signalMMS M3001A Performance Specifications Trends D80 Intelligent Display Performance Specifications Monitor Interface Specifications Display Specifications Video Interface MP60 IntelliVue 802.11 Bedside Adapter Wireless Network AdapterMP70/MP80/MP90 Sxga MP80, MP90 ECG/Arrhythmia/ST Performance Specifications Measurement SpecificationsECG/Arrhythmia/ST Time to Alarm for ECG/Arrhythmia/ST Alarm Specifications Range AdjustmentExtreme Tachy Extreme Brady Respiration Respiration Performance SpecificationsSpO2 SpO2 Performance Specifications NBP Performance Specifications Stat Mode Cycle Time Auto Mode Repetition TimesVenipuncture Mode Inflation Inflation Pressure Adult Range Adjustment Systolic Invasive Pressure and Pulse Invasive Pressure Performance Specifications Alarms Range Adjustment Delay PressureTemp Temp Microstream CO2 Humidity Correction Factor M3015A Microstream CO2 Performance Specifications M3014A Sidestream CO2 Performance Specifications M3014A Mainstream CO2 Performance SpecificationsOperating Temperature Response Time Mainstream CO2 Humidity Correction Factor M3016A Mainstream CO2 Performance Specifications Spirometry Spirometry Performance SpecificationsInterfering Gas and Vapor Effects On CO2 Measurement Values Inspired Volume Volume numericExpired Volume Whichever is greater Cardiac Output / Continuous Cardiac Output CCO Performance Specifications TcGas TcGas Performance Specifications SvO2 SvO 2 Performance Specifications EEG Performance Specifications Electromagnetic Compatibility EMC Specifications Safety and Performance TestsAccessories Compliant with EMC Standards Electromagnetic Emissions Recommended Separation Distance Electromagnetic Immunity 367 Restart time Fast Transients/Bursts Default Settings Appendix ECG, Arrhythmia, and ST Default Settings Alarm Default Settings 371 372 Pulse Default Settings SpO2 Default Settings Respiration Default SettingsSpO 2 Settings Factory Adult Factory Pedi Factory Neo SpO 2 Alarm Default Settings Adult Pediatric Neonatal Temperature Default Settings NBP Default Settings Invasive Pressure PAP Settings Invasive Pressure Default SettingsSettings Factory Adult Factory Pedi Factory Neo Cardiac Output Default Settings Spirometry Default Settings CO2 Default SettingsSpirometry Adult Pedi Neo Settings SvO2 Default Settings TcGas Default SettingsTcGas Settings Factory Adult SvO2 Settings BIS Default Settings EEG Default SettingsEEG Settings Factory Adult Factory Pedi Factory Neo Adult Pedi Neo Device Alarms Ignored Color Green VueLink Default Settings 382 EEG 322 Hospira Inc Timeout periods 113 yellow Cpap Resp DSC BIS Fast Marker input connector Preparing skin for ECG Pressure PVR/PVRI Re-triggering events Retrolental fibroplasia SpO2 Viewing 223 trends pop-up keys 225 trends priority list Module options 281 module setup Visible waves and numerics Xii