Neonatal/Infant Cuffs Disposable, non-sterile

33 Accessories

NBP Accessories

Adult/Pediatric Antimicrobial Coated Reusable cuffs

Patient Category (color)	Limb	Bladder Width	Part No.	Tubing
	Circumference
	(cm)

Adult Thigh (grey)	45 - 56.5	21.0 cm	M4559A	M1598B
Large Adult X-Long (burgundy)	35.5 - 46.0	17.0 cm	M4558A	(1.5m) or
Large Adult X-Long (burgundy)	35.5 - 46.0	17.0 cm	M4558A
Large Adult (burgundy)	35.5 - 46.0	17.0 cm	M4557A	M1599B (3m)
Large Adult (burgundy)	35.5 - 46.0	17.0 cm	M4557A
Adult X-Long (navy blue)	27.5 - 36.5	13.5 cm	M4556A
Adult (navy blue)	27.5 - 36.5	13.5 cm	M4555A
Small Adult (royal blue)	20.5 - 28.5	10.6 cm	M4554A
Pediatric (green)	13.8 - 21.5	8.0 cm	M4553A
Infant (orange)	9 - 14.8	5.4 cm	M4552A

Adult/Pediatric Soft Single Patient Single-Hose Disposable Cuffs

Patient Category	Limb Circumference		Bladder	Part No.	Tubing
	(cm)		Width

Adult (Thigh)	45 - 56.5 cm		20.4 cm	M4579A	M1598B (1.5m)
Large Adult X-Long	35.5	- 46 cm	16.4 cm	M4578A	or
Large Adult X-Long	35.5	- 46 cm	16.4 cm	M4578A
Large Adult	35.5	- 46 cm	16.4 cm	M4577A	M1599B (3m)
Large Adult	35.5	- 46 cm	16.4 cm	M4577A
Adult X-Long	27.5	- 36.5	13.1 cm	M4576A
Adult	27.5	- 36.5 cm	13.1 cm	M4575A
Small Adult	20.5	- 28.5 cm	10.4 cm	M4574A
Pediatric	15.0	- 21.5 cm	8.0 cm	M4573A
Infant	9 - 15 cm		5.6 cm	M4572A

Neonatal/Infant Cuffs (Disposable, non-sterile)

Cuffs	Limb Circumference	Bladder Width	Part No.	Tubing
	(cm)

Size 1	3.1 to 5.7 cm	2.2 cm	M1866A	M1596B (1.5m)
Size 2	4.3 to 8.0 cm	2.8 cm	M1868A	or
Size 2	4.3 to 8.0 cm	2.8 cm	M1868A	M1597B (3m)
Size 3	5.8 to 10.9 cm	3.9 cm	M1870A	M1597B (3m)
Size 3	5.8 to 10.9 cm	3.9 cm	M1870A
Size 4	7.1 to 13.1 cm	4.7 cm	M1872A

312

Page 332

Image 332

Philips MP40/50 manual Adult/Pediatric Antimicrobial Coated Reusable cuffs, Neonatal/Infant Cuffs Disposable, non-sterile

MP60/70/80/90, MP40/50, MP20/30 specifications

Philips MP20/30, MP40/50, and MP60/70/80/90 are advanced patient monitoring systems designed to enhance clinical workflows and patient care in diverse healthcare settings. These devices combine cutting-edge technologies and user-friendly interfaces, making them essential tools for hospitals and healthcare providers.

The MP20 and MP30 are notable for their compact design, making them ideal for environments where space is limited. They come equipped with a variety of monitoring parameters, including ECG, SpO2, and non-invasive blood pressure, providing a comprehensive overview of patient health. These models are particularly suited for use in general wards or recovery areas, offering reliability and ease of use.

Moving to the MP40 and MP50, these monitors incorporate more advanced functionalities, including multi-gas monitoring, which is vital for anesthetic applications. They feature a robust data storage capacity, allowing for extensive patient history tracking and improved decision-making capabilities. The intuitive touchscreen interfaces facilitate quick access to essential information, enabling healthcare professionals to respond efficiently to changes in a patient's condition.

The MP60, MP70, MP80, and MP90 series represent the pinnacle of Philips' patient monitoring technology. These monitors are equipped with advanced algorithms that enhance the precision of vital sign measurements, including advanced ECG analysis capabilities that assist in detecting arrhythmias. The MP80 and MP90 models further integrate advanced monitoring technologies such as 3D visualization for hemodynamics and deep learning algorithms for early warning systems.

Connectivity is a key feature across the Philips monitoring range, with many models offering seamless integration with hospital information systems and electronic health records. This connectivity ensures that patient data is easily accessible to clinicians, promoting informed decision-making. Moreover, alarm management features are designed to minimize false alarms, significantly improving the staff's response time by focusing on critical alerts.

In summary, Philips MP20/30, MP40/50, MP60/70/80/90 monitors deliver exceptional monitoring capabilities, combining user-friendly design with advanced technology. Their varied features allow them to cater to different clinical needs, enhancing patient care and supporting healthcare professionals in their critical roles. With these monitors, healthcare facilities can achieve a new standard in patient monitoring, ensuring quality and safety in patient management.

Contents

IntelliVue Patient Monitor M8000-9001G Table Of Contents What’s New? Patient Alarms and INOPs ECG, Arrhythmia, and ST Monitoring Capture 12-Lead Monitoring Pulse Rate Monitoring SpO2 Monitoring Invasive Pressure Monitoring Carbon Dioxide Monitoring tcGas Monitoring BIS Calculations Recording Using the Drug Calculator Respiratory Loops Accessories Default Settings Appendix TcGas Default Settings Basic Operation Introducing the IntelliVue Family IntelliVue MP20/MP30 MP20/MP30 left side MP20/MP30 front panel AC Power LEDMP20/MP30 Major Parts and Keys MP40/MP50 left side IntelliVue MP40/MP50MP40/MP50 Major Parts and Keys IntelliVue MP60/MP70 MP40/MP50 front panel MP60/MP70 Major Parts and Keys IntelliVue MP80/MP90 Remote Alarm Device MP80/MP90 Major Parts and KeysD80 Intelligent Display Display Unit Flexible Module Server M8048A Related ProductsDocking Station Measurement Modules Multi-Measurement Server M3001A Example Module Pressure M3001A Connectors and Symbols Measurement Server Extensions M3014A, M3015A and M3016A Capnography Extensions M3014A Capnography M3016A Mainstream M3012A Hemodynamic Measurement Server Extension M3012A Hemodynamic Monitor information line Other screen elements Enter Main Setup menuOperating and Navigating Using the Setup Menu Using the TouchscreenSelecting Screen Elements Disabling Touchscreen Operation Using the SpeedPoint Follows the Silence permanent key configuration Using the Navigation Point Using a Mouse or TrackballUsing Keys Permanent Keys SmartKeys Hardkeys Pop-Up Keys MC MR M+ Back √ C/CE Using the On-Screen KeyboardUsing the On-Screen Calculator Operating Modes Standby ModeSelect Main Setup, followed by Monitor Standby Understanding Screens Switching to a Different ScreenChanging a Screen’s Content Waves a Split Screen a Loops Cardiac Output Vital Signs a Using Additional DisplaysChange Screen menu Using the Visitor Screen Measurement SettingsMonitor Settings Understanding Profiles Swapping a Complete Profile Measurement a Measurement B Measurement C Measurement D Understanding Settings Swapping a Settings BlockDefault Profile Changing Measurement Settings Switching a Measurement On and Off Switching Numerics On and OffAdjusting a Measurement Wave Changing Wave Speeds Freezing Waves Changing Wave Speed for a ChannelFreezing An Individual Wave Freezing All Waves Using Labels Resolving Label Conflicts Conflicting measurementLabels are shown in red De-activated labels are Grayed-out Changing Monitor Settings Adjusting the Screen BrightnessAdjusting Touch Tone Volume Setting the Date and Time Switching On Setting up the Measurement Servers and ModulesChecking Your Monitor Revision Getting Started Disconnecting from Power Using Remote ApplicationsMonitoring After a Power Failure Networked Monitoring Remote Application Popup Keys Remote Applications SmartKeyPop-Up Keys Selecting this pop-up key lets you Again What’s New? What’s New in Release D.0? What’s New in Release C.0? What’s New in Release B.1? What’s New in Release B.0? What’s New in Release A.2? What’s New in Release A.2? Alarms ↑ ** HR High Alarm Tone Configuration Visual Alarm IndicatorsAudible Alarm Indicators Changing the Alarm Tone Volume Minimum Volume for No Central Monitoring InopTraditional Audible Alarms HP/Agilent/Philips/Carenet ISO/IEC Standard 9703-2 Audible Alarms Acknowledging Alarms Pausing or Switching Off AlarmsAlarm Reminder ReAlarm Select Main Setup -Alarm Settings To Pause All Alarms To Switch All Alarms OffTo Switch Individual Measurement Alarms On or Off While Alarms are Paused or Off Alarm Limits Restarting Paused AlarmsResetting Arrhythmia Alarm Timeouts Extending the Alarm Pause Time Viewing All Alarm Limits On/Off Changing Alarm LimitsAlarms About Automatic Alarm Limits AutoLimits Documenting Alarm LimitsAlarm limits Measurement value Reviewing Alarms Alarm Messages WindowReview Alarms Window Alarm Review Pause Al Limits Alarms Min 10 Min Viewing the Alarm Latching Settings Understanding Alarm MessagesLatching Alarms Alarm Latching Behavior Testing AlarmsAlarm Behavior at On/Off Alarm Message From Condition Indication Patient Alarms and INOPsPatient Alarm Messages CCO/CCI High CCO/CCI LOWCPP High CPP LOW HR High HR LOWIrregular HR Missed Beat NON-SUSTAIN VT Pacer not CaptPacer NT Pacing ST Multi RR HighRR LOW Alarm Vent BigeminyVent FIB/TACH Vent Rhythm Technical Alarm Messages INOPs Inop Message, Indication Source What to do BIS DSC Update BIS Cable IncompatBIS Cable Usage BIS DSC Disconn BIS Isoelectrc EEG BIS Lead OFFBIS Overcurrent BIS Sensor Disconn Cannot Analyze ECG Cannot Analyze STCCI no BSA CCO BAD Press Sign CCO Press Invalid CCO Press OverrangCCO Pulse Overrang CCO Recalibrate CO2 CAL Mode Lead OFFCO2 Auto Zero CO2 CAL Running CO2 Update FW CO2 Check CALEquip Malf CO2 Equip Malf CO2 Zero Failed CO2 Zero RequiredCO2 Zero Running CPP CHK Sources Eegx Lead OFF Eegx Leads OFFEEG Line Noise EEG Muscle Noise Leads OFF LL Lead OFFMMS Unplugged MMS Unsupported Signal PPV BAD SignalNBP Interrupted NBP Measure Failed Malf TransducerPulsatile Overrange Some ECG Alarms OFF Spiro UpgradeSpiro Alarms Suppr Resp Erratic SpO2 label EXTD. Update SpO2 Label Poor SignalSpO2 label Deactivated SpO2 label Equip Malf Label Upgrade CAL ModeConfiguration CAL Failed SVR/SVRI CHK Sources SVR/SVRI CHK UnitsSVR/SVRI SET CVP Used CAL Requird No Transduc Stabilizing Conf SetupCable Managing Patients Admitting a Patient Admitting a Centrally-Monitored Patient Quick Admitting a PatientPatient Category and Paced Status Editing Patient Information Discharging a Patient Transferring Patients Transferring a Centrally-Monitored Patient Transferring a Patient with an MMS no Central Station MMS Trend Upload and MMS Settings UploadData Upload from an MMS Manually Resolving Patient Mismatch Data Exchange Between Information CentersResolving Patient Information Mismatch Patient Mismatch If One Set of Patient Data is Correct Patient Mismatch If Neither Patient Data Set is Correct Care Groups Automatically Resolving Patient MismatchPatient Mismatch If Both Patient Data Sets Are Correct Patient Information This information is taken from Understanding the Care Group Overview Bar Depending on space available Main Setup menu, select My Care Group Viewing the My Care Group Window 110 Viewing the Other Bed Window Other Bed Pop-Up Keys Care Group AlarmsVisual Alarm Status Information in the Other Bed Window Unpairing a Telemetry Device Telemetry Data Overview Silencing Telemetry Alarms from the Bedside Suspending Telemetry AlarmsUsing Standby Telemetry Data Overview Screen Element ECG, Arrhythmia, and ST Monitoring Skin Preparation for Electrode PlacementConnecting ECG Cables Selecting the Primary and Secondary ECG Leads Checking Paced Status Understanding the ECG Display Monitoring Paced Patients Setting the Paced Status Pace Pulse Rejection Changing the Size of the ECG WaveAvoiding Pace Pulse Repolarization Tails To Change the Size of an Individual ECG Wave To Change the Size of all the ECG Waves Changing the Volume of the QRS ToneChanging the ECG Filter Settings Choosing Easi or Standard Lead Placement About ECG LeadsECG Leads Monitored Changing Lead Sets Electrode labels Electrode colors ECG Lead PlacementsECG Lead Fallback Standard 3-Lead Placement Standard 5-Lead Placement Chest Electrode Placement Lead Placement Conventional 12-Lead ECG Modified 12-Lead ECG Choosing Standard or Modified Electrode PlacementLabelling 12-Lead ECG Reports Capture 12-Lead Easi ECG Lead PlacementWhen Mod. LeadPlacement is set to Off On the lower sternum at the level ECG, Arrhythmia, and ST Alarm Overview Using ECG Alarms ECG Safety Information 106 Arrhythmia Options Where Can I Find More Information?About Arrhythmia Monitoring Switching Arrhythmia Analysis On and Off Choosing an ECG Lead for Arrhythmia MonitoringAberrantly-Conducted Beats Atrial Fibrillation and Flutter Understanding the Arrhythmia Display Intermittent Bundle Branch BlockViewing Arrhythmia Waves Arrhythmia Beat Labels Description Or E Arrhythmia Status MessagesRhythm Status Messages Arrhythmia Relearning Initiating Arrhythmia Relearning ManuallyEctopic Status Messages Explanation Or E Arrhythmia Relearn and Lead Fallback Arrhythmia AlarmsAutomatic Arrhythmia Relearn Yellow Arrhythmia Alarms Arrhythmia Alarms and LatchingSwitching Individual Arrhythmia Alarms On and Off Switching All Yellow Arrhythmia Alarms On or Off How are Yellow Arrhythmia Alarms Indicated? What is a Timeout Period?Resetting the Timeout Period Behavior of Unsilenced Arrhythmia Alarms Arrhythmia Alarm Chaining Red Arrhythmia AlarmsPVC Alarms Chain Yellow Arrhythmia Alarms Beat Detection Alarms Chain Understanding PVC-Related Alarms Non-Sustain TachRun PVCs Pair PVCs Selecting ST Leads for Analysis Switching ST On and OffAbout ST Monitoring Understanding the ST Display ST-II ST-V ST-aVR Updating ST Baseline Snippets Recording ST Segments Adjusting ST Measurement Points About the ST Measurement Points ST-I ISO Point ST Point J+60 ST Alarms Single- or Multi-lead ST AlarmingChanging ST Alarm Limits Viewing ST Maps Trend View ST Map Current Switching Between ST Map Views Setup ST Analysis menu, select ST MapViewing an ST Map Working in the ST Map Task Window Displaying an ST Reference Baseline Updating an ST Map Reference BaselineChanging the Scale of the ST Map Changing the Trending Interval 126 System Pulse Source Entering the Setup Pulse MenuMonitoring Pulse Rate Switching Pulse On and Off Using Pulse AlarmsSelecting the Active Alarm Source HR or Pulse? Setup SpO2 menu QRS Tone Alarm Source Selection DisabledChanging HR/Pulse Alarm Limits 130 Cardiac Overlay Lead Placement for Monitoring RespOptimizing Lead Placement for Resp Auto Detection Mode Understanding the Resp DisplayChanging Resp Detection Modes Lateral Chest Expansion Resp Detection Modes and Cardiac Overlay Manual Detection ModeChanging the Size of the Respiration Wave Using Resp Alarms Changing the Apnea Alarm DelayResp Safety Information Changing the Speed of the Respiration Wave 135 136 Applying the Sensor Monitoring SpO2SpO2 Sensors Connecting SpO2 Cables Measuring SpO2 Assessing a Suspicious SpO2 Reading Understanding SpO2 Alarms Alarm DelaysAdjusting the Alarm Limits Adjusting the Desat Limit Alarm Perfusion Pleth Indicator Setting SpO2/Pleth as Pulse SourceSetting Up Tone Modulation Setting the QRS Volume Choose the second measurement source Monitoring NBP Introducing the Oscillometric NBP Measurement Preparing to Measure NBP Measurement LimitationsMeasurement Methods Reference Method Correcting the Measurement if Limb is not at Heart Level Understanding the NBP Numerics Enabling Automatic Mode and Setting Repetition Time Starting and Stopping Measurements Choosing the NBP Alarm Source Assisting Venous PunctureCalibrating NBP Menu option Pressure value monitored 148 Making a Temp Measurement Monitoring TemperatureSelecting a Temperature for Monitoring Extended Temperature Label Set Calculating Temp Difference Setting up the Pressure Measurement Monitoring Invasive Pressure Zeroing the Pressure Transducer Selecting a Pressure for MonitoringExtended Pressure Label Set Label Description Using the Zero Hardkey Zeroing ICP or IC1/IC2Determining a Pressure’s Most Recent Zero Zeroing a Pressure Measurement Adjusting the Calibration Factor Troubleshooting the ZeroDisplaying a Mean Pressure Value Only Changing the Pressure Wave Scale Non-Physiological Artifact Suppression Choosing the Pressure Alarm SourceOptimizing the Waveform Calibrating Reusable Transducer CPJ840J6 Making the Pressure Calibration Calculating Pulse Pressure Variation Troubleshooting the Pressure CalibrationCalculating Cerebral Perfusion Measuring Pulmonary Artery Wedge Pressure Editing the Wedge Identifying the Pressure Analog Output Connector Monitoring Cardiac Output Hemodynamic Parameters Using the C.O. Procedure Window Cardiac Output Transpulmonary Accessing the Setup C.O. and Setup CCO Menus Measuring C. O. Using the PiCCO MethodEntering the HemoCalc Window Measuring Continuous Cardiac Output Setting Up the PiCCO C.O. Measurement CVP Performing PiCCO C.O. Measurements Editing PiCCO C.O. Measurements CCO Calibration Status Indicators Saving and Calibrating PiCCO C.O. Measurements Ice-Bath Setup for RH Thermodilution C.O. Measurements Measuring C.O. Using the Right Heart Thermodilution MethodSetting up RH C.O. Measurements Setting the Computation Constant Documenting C.O. MeasurementsPerforming RH C.O. Measurements Editing and Saving RH C.O. Measurements Injectate Volume, Patient Weight and Etvi Values PiCCO Only Cold Injectate Room Temperature Injectate Etvi Etvi ≥Injectate Guidelines Guidelines for Right Heart Thermodilution C.O. Injectate CCO Curve Alert Messages Possible Causes CCO Prompt Messages CCO Prompt Messages Possible Causes CCO Safety Information CCO Warning MessagesCCO Warning Messages Possible Causes O. module or measurement server extension has been plugged 174 Monitoring Carbon Dioxide Using the Capnography Extension M3014A Preparing to Measure Mainstream CO2 Preparing to Measure Sidestream CO2 Using the Sidestream Sensor Holder Removing Exhaust Gases from the System Using the Mainstream CO2 Extension M3016AChecking Transducer Accuracy Calibrating the Transducer Attaching and Removing the CO2 Transducer Preparing to Measure Microstream CO2 Using the Microstream CO2 Extension M3015AUsing Microstream Accessories Using the FilterLine and Airway Adapter Removing Exhaust Gases from the System Setting up Mainstream and Sidestream CO2 Adjusting the CO2 Wave ScaleSetting up CO2 Corrections Suppressing Zero Calibration Changing CO2 Alarms Changing the Apnea Alarm DelayDeriving Alarms From awRR Changing awRR Alarm Limits 185 186 Monitoring Airway Flow, Volume and Pressure Attaching the Flow Sensor 189 Zero Calibration Automatic Purging Adult Mode Incorrect Balance Gas Setting N2O instead of N2Manual Purging Gas Compensation Setting up Spirometry Optimizing Scale SettingsAlarms and Alarm Limits Changing the Apnea Alarm Delay Setting the Gas Compensation Mode Automatic Alarm SuppressionSetup Spirometry menu, select Gas Compensation Choosing Measured AWV Components Changing the Temperature of the Inspired Gas Monitoring tcGas Identifying tcGas Module Components Setting the tcGas Site Timer Setting the tcGas Sensor TemperatureUsing the tcGas Site Timer Setting the tcGas Barometric Pressure Restarting the tcGas SiteTimerDisabling the tcGas Site Timer Remembraning the tcGas Transducer New/Dried Out Transducers Storing tcGas Transducers Calibrating the tcGas Transducer Troubleshooting tcGas Calibration Calibration Failure Applying the tcGas Transducer Finishing tcGas Monitoring TcGas Corrections Monitoring SvO2 Preparing to Monitor SvO2 Carrying out a Pre-insertion Calibration Inserting the Catheter Performing a Light Intensity Calibration Setting Up the In-Vivo Calibration Performing In-Vivo CalibrationCalculating Oxygen Extraction Making the In-Vivo Calibration Percentage of total power in each frequency band Monitoring EEG EEG Monitoring Setup Using the EEG Impedance/Montage WindowEEG Montage SmartKey KOhm ImpedanceLimit5kOhm EEG 1 F3-P3 EEG 2 F4-P4 Choosing an EEG Electrode Montage Changing the Impedance LimitMontage Name Label1 Impedance Indicators About Electrode-to-Skin Impedance About Compressed Spectral Arrays CSA CSA contains the following information Changing EEG Settings Changing CSA SettingsSwitching EEG Numerics On and Off Changing the Scale of the EEG Waves for Display EEG Reports Changing Filter FrequenciesChanging the Speed of the EEG Wave CSA on Report EEG Safety Information EEG and Electrical Interference Monitoring BIS BIS Monitoring Setup Monitoring BIS Using the DSC and BIS Engine Monitoring BIS using the BISx BoardAspect BIS Sensor Aspect BISx 185-0145-PH With sensors for single-patient use BIS Continuous Impedance Check BIS Cyclic Impedance CheckManufacturer’s Information Starting a Cyclic Impedance Check BIS Window BIS Impedance IndicatorsSymbol Color Action Switching BIS and Individual Numerics On and Off Switching BIS Filters On or OffChanging the BIS Smoothing Rate Changing the Scale of the EEG Wave BIS Safety Information 222 Trends Viewing Trends Viewing Graphic Trends Viewing Vital Signs Trends Setting Up Trends Trends Pop-Up Keys Making Segment Settings Trend Groups Trend IntervalTrend Priority Trend Parameter Scales Documenting Trends Graphical Trend Presentation Trends Databases Screen TrendsAperiodic Trends Database Trending Multiple-Value Measurements Setting the Screen Trend Time Changing the Selection of Screen Trends Displayed Activating the Cursor for Screen TrendsChanging the Screen Trend View Tabular View Horizon View Setting the HorizonSetting the Horizon Trend Scale Hemodynamic Oxygenation Ventilation CalculationsViewing Calculations Calculations Windows Calculations Pop-Up Keys Reviewing Calculations Performing Calculations Entering Values for Calculations Automatic Value SubstitutionAutomatic Unit Conversion Manual Unit Conversion Documenting Calculations 238 High Resolution Trend Waves Changing the Hi-Res Trend Waves DisplayedHi-Res Trend Wave Scales Hi-Res Trend Waves and OxyCRG Recordings Printing Hi-Res Trend Wave ReportsHi-Res Trend Wave Recordings Event Surveillance Levels of Event SurveillanceBasic Event Surveillance Advanced Event Surveillance Event Groups Event Episodes Events Pop-Up Keys Event Episode Types Pre-time Post-timeOpen the Event Episode window to review the selected event Detail ABP Event TriggersSpO2 Resp Event Notification Setting Triggers for NER and Basic Event SurveillanceEvent Retriggering Triggering Events Manually Set the event triggerFor each HR Pulse Event Counter Events DatabaseViewing Events AD21 BD71 AB D 11 D6 M0 Counting Combi-EventsCounting Neonatal Event Review NER Events Event Summary Window Event Review Window Event Episode Window Apnea Documenting Event Review Annotating EventsDocumenting Events Event Review Recordings Documenting an Event EpisodeEvent Recordings Event Reports Event Episode RecordingsPlet Res Event Review Reports Event Episode Reports Event Summary Reports 256 Recording Stop key Stops the current recording Starting and Stopping Recordings Quickstarting Recordings Overview of Recording Types Extending RecordingsStopping Recordings Recording Without a Template All ECG Waves Recordings Creating and Changing Recordings Templates Setup Recording menu select General Select ECG Gain Changing ECG Wave Gain Recording Strip Code Recording PrioritiesSample Recording Strip Code Meaning Recorded WaveformsMaintaining Recording Strips Reloading Paper Recorder Status Messages Recorder Status Messages Explanation 266 Starting Reports Printouts Report types Report contents How to start printing reportsPrinting Patient Reports Setting Up Reports Setting Up ECG ReportsStopping Reports Printouts Limits Setting Up Vital Signs and Graphic Trend Reports Setting Up Auto Reports Setting Up Individual Print Jobs Checking Printer Settings Dashed Lines on Reports Unavailable Printer Re-routing Reports Printer Status Message Possible causes and suggested action Printer Status MessagesSample Report Printouts Alarm Limits Report Patient Name Realtime Report Cardiac Output Report ECG Report type Available Formats Available Paper Sizes ECG ReportsOther Reports Using the Drug Calculator Accessing the Drug Calculator Performing Calculations for a Non-Specific Drug Performing Drug CalculationsAbout the Rule of Six Performing Calculations for a Specific Drug Drug Calculator Charting Infusion Progress Using the Titration TableDocumenting Drug Calculations Titr.Table VueLink Modules Module Type Max External Devices Wave Numeric Connecting an External Device Setup Device Name menu, select Show Device DataChanging VueLink Waves and Numerics Displayed Viewing the VueLink Device Data Window Alarms/INOPs From External Devices Using VueLink ScreensSwitching VueLink On and Off Language Conflict with External Device Drivers Using Timers Viewing TimersSelect Main Setup Timers Notification Timer Setup Pop-up Keys Setting Up TimersTimer Types Timer Label Displaying Timers On The Main Screen Timer Counting DirectionSelect Change Numeric Select Any Timer Run Time Main Screen Timer Pop-up Keys SetupDisplaying a Clock On The Main Screen Label Respiratory Loops Viewing Loops Showing/Hiding Loops Select Main SetupCapturing and Deleting Loops Using the Loops Cursor Setting Up Source DeviceSetup VueLink Device menu Changing Loops Display Size Documenting Loops Care and Cleaning General Points Disinfecting CleaningCleaning Monitoring Accessories Sterilizing Cleaning the Recorder Printhead M1116B onlyCleaning the Batteries and Battery Compartment 296 Using the Batteries MP20/MP30 one or two Philips Battery Status on the Main Screen Battery Power IndicatorsBattery LED Battery status symbols Checking Battery Charge Battery Status WindowViewing Individual Battery Status Recording Battery Status Optimizing Battery Performance Replacing Batteries Display Brightness Setting Charging BatteriesConditioning Batteries Unequally-Charged Batteries Battery Safety Information 304 Inspecting the Cables and Cords Maintenance TroubleshootingInspecting the Equipment and Accessories Maintenance Task and Test Schedule Disposing of Empty Calibration Gas Cylinders TroubleshootingDisposing of the Monitor 308 Accessories ECG/Resp AccessoriesTrunk Cables Electrode Cable Sets Electrode One Piece Cables Reusable Cuff Kits NBP AccessoriesSet Combiners and Organizers Adult/Pediatric Antimicrobial Coated Reusable cuffs Neonatal/Infant Cuffs Disposable, non-sterilePatient Category Bladder Tubing Width Transducer, accessories, sensor kits Invasive Pressure AccessoriesSpO2 Accessories Required Philips disposable sensors. Not available in the USA Philips disposable sensors. Available worldwide MAX-A Extension / Adapter Cables for Philips and Nellcor Sensors Adapter Cable for Masimo sensors Temperature Accessories Transpulmonary Thermodilution Cardiac Output C.O. AccessoriesRight Heart Thermodilution Mainstream CO2 Accessories for M3016A Mainstream CO2 Accessories for M3014ASidestream CO2 Accessories for M3014A Microstream accessory selection flowchart Microstream CO2 AccessoriesSpirometry Accessories BIS Accessories TcGas AccessoriesEEG Accessories BIS Sensors SvO2 AccessoriesOther BIS Accessories Recorder Accessories Indication for Use Installation and SpecificationsIntended Use Address of the EU Authorized Representative Manufacturer’s InformationBIS Manufacturer’s Information Trademark Acknowledgement Symbols Symbols 12V Installation Safety InformationConnectors MP20/MP30 MP40/MP50 MP60/MP70 333 MP80/MP90 Bedside Adapter Wireless Network Adapter Altitude Setting Monitor Safety Specifications H x D Comments Physical SpecificationsProduct 338 Environmental Specifications Monitor MP40, MP50, MP60, MP70, MP80, MP90 Condition RangeMonitor MP20, MP30 Condition Range Monitor MP20, MP30, MP40, MP50, MP60, MP70, MP80, MP90 D80 Intelligent Display Condition Range Docking Station M8045A Condition Range M4605A Battery Specifications Remote Alarm Device M8025A Condition RangeThermal Array Recorder Module M1116B Condition Range Remote SpeedPoint M8026A Condition Range Monitor Performance Specifications MP20/30, MP40/50, MP60/70/80/90 Indicators MP20/MP30Sounds Trends Alarm signal Review AlarmsMMS M3001A Performance Specifications Trends D80 Intelligent Display Performance Specifications Monitor Interface Specifications Display Specifications IntelliVue 802.11 Bedside Adapter Wireless Network Adapter Video Interface MP60MP70/MP80/MP90 Sxga MP80, MP90 ECG/Arrhythmia/ST Measurement SpecificationsECG/Arrhythmia/ST Performance Specifications ECG/Arrhythmia/ST Alarm Specifications Range Adjustment Time to Alarm forExtreme Tachy Extreme Brady SpO2 Respiration Performance SpecificationsRespiration SpO2 Performance Specifications NBP Performance Specifications Auto Mode Repetition Times Stat Mode Cycle TimeVenipuncture Mode Inflation Inflation Pressure Adult Range Adjustment Systolic Invasive Pressure Performance Specifications Invasive Pressure and Pulse Range Adjustment Delay Pressure AlarmsTemp Temp M3015A Microstream CO2 Performance Specifications Microstream CO2 Humidity Correction Factor M3014A Mainstream CO2 Performance Specifications M3014A Sidestream CO2 Performance SpecificationsOperating Temperature Response Time M3016A Mainstream CO2 Performance Specifications Mainstream CO2 Humidity Correction Factor Interfering Gas and Vapor Effects On CO2 Measurement Values Spirometry Performance SpecificationsSpirometry Volume numeric Inspired VolumeExpired Volume Whichever is greater CCO Performance Specifications Cardiac Output / Continuous Cardiac Output TcGas Performance Specifications TcGas SvO 2 Performance Specifications SvO2 EEG Performance Specifications Safety and Performance Tests Electromagnetic Compatibility EMC SpecificationsAccessories Compliant with EMC Standards Electromagnetic Emissions Electromagnetic Immunity Recommended Separation Distance 367 Fast Transients/Bursts Restart time Default Settings Appendix Alarm Default Settings ECG, Arrhythmia, and ST Default Settings 371 372 Pulse Default Settings Respiration Default Settings SpO2 Default SettingsSpO 2 Settings Factory Adult Factory Pedi Factory Neo SpO 2 Alarm Default Settings Adult Pediatric Neonatal NBP Default Settings Temperature Default Settings Settings Factory Adult Factory Pedi Factory Neo Invasive Pressure Default SettingsInvasive Pressure PAP Settings Cardiac Output Default Settings Spirometry Adult Pedi Neo Settings CO2 Default SettingsSpirometry Default Settings TcGas Default Settings SvO2 Default SettingsTcGas Settings Factory Adult SvO2 Settings EEG Default Settings BIS Default SettingsEEG Settings Factory Adult Factory Pedi Factory Neo Adult Pedi Neo VueLink Default Settings Device Alarms Ignored Color Green 382 EEG 322 Hospira Inc Timeout periods 113 yellow Cpap Resp DSC BIS Fast Marker input connector Preparing skin for ECG Pressure PVR/PVRI Re-triggering events Retrolental fibroplasia SpO2 Viewing 223 trends pop-up keys 225 trends priority list Module options 281 module setup Visible waves and numerics Xii

Philips MP40/50, MP20/30 Adult/Pediatric Antimicrobial Coated Reusable cuffs, Patient Category

Models: MP60/70/80/90 MP40/50 MP20/30

Adult/Pediatric Antimicrobial Coated Reusable cuffs

Patient Category

Bladder

Tubing

Width

Neonatal/Infant Cuffs (Disposable, non-sterile)

Cuffs

Limb Circumference

Bladder Width

Tubing

MP60/70/80/90, MP40/50, MP20/30 specifications