Philips PFL40X7K/12, PFL40X7T/12 Control devices simultaneously, Select speaker output, Device

Control devices simultaneously

If you connect multiple HDMI-CEC devices that support this setting, you can control all such devices through the TV remote control.

Note: This is an advanced setting. Devices that do not support this setting will not respond to the TV remote control.

1.Press .

2.Select [Setup] > [TV settings] >

[EasyLink].

3.Select [EasyLink Remote Control] > [On] or [Off].

4.Press OK to activate.

Tips:

∙To switch back to TV control, press , then select [Watch TV].

∙To control another device, press , then select the device from the Home menu.

∙To exit, press .

EasyLink buttons

You can control HDMI-CEC compliant devices with the following buttons on the TV remote control:

∙: Switch the TV and the connected device on or to standby.

∙Play buttons: Control video or music play.

∙Numeric buttons: Select a title, chapter or track.

∙OK: Start, pause or resume play on the connected device, activate a selection, or access the device menu.

∙ / : Search backwards and forwards on the connected device.

∙: Display the TV Home menu.

You can also control devices through other EasyLink buttons that are available through the On-Screen Remote Control (OSRC).

To access the OSRC

1.While you view content from a connected device, press OPTIONS.

2.Select [Show device keys], then press OK.

3.Select an onscreen button, then press OK.

4.Press to exit.

EN 30

Select speaker output

If a connected device is HDMI CEC compliant, you can output TV audio through an HDMI cable. Additional audio cables are not required. Make sure that you connect

the device to the HDMI connector on the TV. See Connect your TV > About cables

> HDMI (Page 42). Configure TV speakers

1.Press .

2.Select [Setup] > [TV settings] >

[EasyLink] > [TV speakers].

3.Select an option, then press OK: ∙ [Off]: Switch off TV speakers. ∙ [On]: Switch on TV speakers.

∙ [EasyLink]: Stream TV audio through the connected HDMI-CEC device. Switch the TV audio to the connected HDMI-CEC audio device through the

Adjust menu.

∙ [EasyLink autostart]: Turn off TV speakers automatically and stream TV audio to the connected HDMI-CEC audio device.

Select speaker output with the adjust menu If [EasyLink] or [EasyLink autostart] are selected, you can access the Adjust menu to switch the TV audio.

1.While you watch TV, press ADJUST.

2.Select [Speakers], then press OK.

3.Select one of the following, then press OK:

∙ [TV]: On by default.

Stream TV audio through TV and the connected HDMI-CEC audio device until the connected device switches to system audio control. TV audio is then streamed through the connected

device.

∙ [Amplifier]: Stream audio through the connected HDMI-CEC device. If system audio mode is not enabled on the

device, audio continues to stream from the TV speakers. If [EasyLink autostart] was selected, the TV prompts the connected device to switch to system audio mode.