EN 41
English
Stand mount or wall mount
You can apply the best settings for your TV
by selecting wall mount or stand mount.
1. In the [Preferences] menu, select [TV
placement].
2. Select [On a TV stand] or [Wall
mounted], then press OK.
Update software

Check version

1. Press .
2. Select [Setup] > [Software settings] >
[Current software info], then press OK.
The version of the current software is
displayed.
Caution: Do not install a lower version of
software than the current version installed
on your product. TP Vision cannot be held
liable or be made responsible for problems
caused by a software downgrade.
Update the software through one of these
methods:
update with USB storage device
update from digital broadcast
update from the Internet

Update with USB

Before you update the software, make sure
that you have:
A USB storage device that has at least
256 megabytes of storage space, is FAT
or DOS formatted and has its write
protection disabled.
Access to a computer with a USB
connector and Internet access.
Note: Do not use a USB hard drive.
1. Press .
2. Select [Setup] > [Update software], then
press OK.
3. Select [USB], then press OK.
4. Follow the onscreen instructions to start
the update.
Note: The update assistant directs you to
the Philips support website. See the
installation instructions on the website to
complete the update.

Update from digital broadcast

When available, the TV can receive software
updates through digital broadcasts. When a
software update is received, you are
prompted to update the software. We
strongly recommend that you update the
software when prompted.
Follow the onscreen instructions.
Note: To update the software later, select
> [Setup] > [Software settings] > [Local
updates].

From the Internet

You can update the TV software directly
from the Internet by connecting the TV to
the Internet. See Connect your TV >
Network and the Internet (Page 52).
1. Press > [Setup] > [Update software],
then press OK.
2. Select [Internet], then press OK.
3. Follow the onscreen instructions to start
the update.
When the update is complete, the TV
switches to standby and on again
automatically. Wait for the TV to switch
back on. Do not switch the TV on yourself.
Note: If the TV is connected to the Internet,
the TV displays the availability of new
software at startup.
Restore default settings
You can reset all picture and sound settings
and reinstall all TV channels on your TV.
1. Press .
2. Select [Setup] > [TV settings] >
[Reinstall TV], then press OK.
3. Follow the onscreen instructions.