Manuals / Toshiba / Marine Equipment / Marine Radio

Toshiba Release 4.0 manual Mail, Default is 0 no time-out

Models: Release 4.0

1 376

Download 376 pages 3.24 Kb

Page 281

..\Server\Settings\

Mail

DWORD value specifying whether or not Strata CS e-mail functionality will be available. This includes e-mail notification and Exchange synchronization.

Default value is 1 (e-mail functionality is available). A value of 0 specifies that e-mail functionality is not available.

MaxNonSilence

DWORD value specifying the maximum length of uninterrupted sound (in 10 ms units) that will be recorded before the recording is terminated.

Default is 0 (no time-out).

MinDiskFreeSpace

DWORD value specifying the minimum amount of disk space (in megabytes) that must be available for logging and saving voice messages. If the minimum amount is not available, no logging will occur and no voice messages will be saved.

Default value is 50MB.

MonitorInterval

DWORD value specifying the interval in minutes between Strata CS Device Monitor checks. At each interval the Monitor goes through all current devices to see if they are responding, and restarts them if they do not respond within 10 seconds.

Default is 5 minutes.

MonitorTimeout

DWORD value in minutes. This is the length of time that Strata CS waits before automatically restarting a non responding device. When an automatic restart is invoked, a message is added to the Windows Event Log: “Device %1 is not responding, restarting...”

Default is 5 minutes.

MonitorRestart

DWORD value. If this is non-zero, when the system detects a nonresponding device it will attempt to restart it. A non-zero setting can cause problems when a device is not responding, because it can result in slow database access.

Default is 1.

APPENDIX A. STRATA CS CONFIGURATION SETTINGS

A-5

BETA DOCUMENT - PRELIMINARY & CONFIDENTIAL

Image 281

Toshiba Release 4.0 manual Mail, Default is 0 no time-out

Contents

Administrator Manual Publication Information Contents Managing Trunks and Spans Managing Users and Stations Managing Workgroups Handling Inbound Calls System Prompts Extending Strata CS Appendix E. Using Performance Counters Overview of Upgrading and Configuring Strata CS Welcome to Strata CS Significant Strata CS featuresWhat’s New in Strata CS New features in Toshiba Strata CS 4.0 include the followingBeta Document Preliminary & Confidential Beta Document Preliminary & Confidential What’s automatically upgraded Miscellaneous new featuresMore information Before you beginChanges in Strata CS from version 2.1 to 3.0 or later Changes in Strata CS 3.0 or later Configuring Strata CS for the first time Strata CS includes the following documentation Where to get helpStrata CS documentation Document Printed Online Book Your Strata CS providerPage Strata CS Administrator Linking computers and phones About the Strata CS AdministratorLogging on to the Administrator Administrator interfaceUsers Dialing ServicesWorkgroups TrunksWorking in views MaintenanceIVR Plug-Ins IP GatewaysNew Workgroup Create a new workgroup Using commands in a viewUsing the Administrator toolbar Create a new auto attendant To create a new item that is based on an existing item Performing basic actions in the AdministratorCreating items Renaming items Deleting itemsCopying and pasting items Customizing columnsChanging the voice file format Using the audio controlsWorking with voice files Changing audio output Importing and exporting voice filesPage Strata CS Licenses Entering licenses About Strata CS licensesTo enter your Strata CS Server license To enter all other license types Removing licensesVerify that you have removed all other licenses To remove all licensesTo remove the Server license Page Defining System Settings Emergency. Use to configure emergency dialing options About system settingsCustomizable settings Server Configuration Changing Windows NT/2000 registry settingsGeneral tab Rerecording voice promptsSelect one of the following from the drop-down list No events. This is the default. No notifications are sentWindows Event Log notifications Business Hours Defining business hours and holidaysTo define business hours and holidays Beta Document Preliminary & Confidential Logging internal calls Call Log tabArchiving the Call Log To log internal calls as well as external callsTo archive Call Log information Disk usage Storage tabMoving voice files Allocating disk spaceTo move voice message files Defining special access codesDialing tab Setting dialing timeouts Emergency tab Using standard 911 service with Strata CSUsing extended 911 service with Strata CS To set emergency dialing options How emergency numbers are handledBeta Document Preliminary & Confidential Other tab Setting dial-by-name directory optionsPresenting a confirmation menu before voice mail Setting up Microsoft Exchange synchronizationExchange Server Mailbox Permissions To set up Microsoft Exchange synchronization for a userSetting the minimum password length Managing Trunks and Spans Trunk types About trunksNaming trunks Adding trunksMonitoring trunks Deleting trunksInbound and outbound calls and hunt groups Configuring trunksMatching trunk settings with your phone company Placing outbound calls on a specific trunk ANI/DID digit collectionRouting inbound calls on a trunk Collecting ANI/DID digits Using did with analog lines Setting up fax routingUsing did with Robbed Bit T1 lines Customizing fax routing Trunks viewAbout digital and Internet spans Adding an analog trunk Setting up digit collection on an analog trunk Trunks view, select the trunk To collect digits on an analog trunkAdding the Robbed Bit T1 span in the Trunks view Configuring signaling using the Robbed Bit T1 ExperimenterAdding a digital Robbed Bit T1 span Beta Document Preliminary & Confidential Using a signaling template To enter trunk defaults for a span Entering trunk defaults for a spanAdding a digital Isdn or CAS span Adding a digital Isdn BRI span To set your Isdn parameters Optimizing your Isdn settingsEnabling Isdn Megacom support Adding an Internet span Modifying Strata CS IP codecs To modify Strata CS IP codecs GSM .0 kbsTo change an IPLink board parameter Fine-tuning your IP connectionBeta Document Preliminary & Confidential Page Managing Users and Stations Station Users viewExtension Mail Usage TitleGreeting Usage Disk UsageConfiguring a system without an Operator Admin and Operator usersAbout users and roles UsersUnderstanding personal Operators Setting up workgroups for the OperatorHow callers are transferred to Operators Changing the Operator’s extension fromWhere to set user options Setting user optionsRoles Described in detail in this chapterAdding a user at the telephone About adding a userAdding a user in the User dialog box Identifying the user Adding a user by using a templateAssigning an extension Assigning a station ID Linking users and phones Assigning a did number Setting up a personal operator Creating a passwordEditing a user’s Client settings Choosing a language for telephone promptsAllocating space for recorded greetings and voice titles Recordings tabAllocating space for voice messages Enabling Microsoft Exchange Server synchronization Setting up call recordingTo enable synchronization Notifications tab Setting pager notification Setting e-mail notificationScheduling notifications Defining a schedule for e-mail and pager notification To add a schedule entry To set up a custom time rule Setting up custom time rulesClick OK to add the custom date Call Handling tab To turn on call forwarding Setting up call forwardingIssues with forwarded calls on Call forwarding and voice mail Mobile phone issues with forwarded callsForwarding calls over Centrex/PBX trunks Listing a user in the dial-by-name directoryPhone tab Activating features for Class phonesSending Dtmf digits to stations Setting the number of seconds to ring the phonePadding extensions sent as caller ID on internal calls Activating features on Toshiba digital phone Hands free answering Secondary Directory Number parameters Dialing tab To set dialing permissions Global dialing permissionsSetting account code modes Other settings Permissions tab Individual permissions and roles By default, Strata CS creates the following two rolesTo create a new role New RoleOther tab Other tab contains user options for hands-free modeRecording the new user’s voice title and greeting Managing usersHelping new users get started After you create a new user, do the followingDeleting a user Updating users’ mail, greeting, and disk usage totalsMoving a user Adding a station Managing stationsSupported phones Supporting different types of Class phonesViewing station activity Visual message waiting indicator informationManaging Workgroups About Workgroups Workgroups view Using the General tabCreating a Workgroup Using the Dialing tab Adding a voice title Assigning a did number to a workgroupTransferring unanswered calls Listing workgroups in the dial-by-name directoryPage Managing Outbound Calls See Adding an Internet-to-Phone Number service on About dialing servicesDialing service types Using routing services to manage other dialing services Default dialing serviceDialing Services view How you can use dialing services Hiding dialing services in the Client Deleting or disabling a dialing serviceTips on access codes and names for services Access codesUsing dialing services to install and troubleshoot trunks Disabling dialing services while creating themAvoiding dialing ambiguities How Strata CS uses access codesUpdating phone numbers after changing an access code Where the default access codes appear Setting default access codes for ringbacksCreating a dialing service with access code Adding a Phone Number dialing service Beta Document Preliminary & Confidential Adding a Centrex/PBX Extension service Beta Document Preliminary & Confidential Adding an Internet Address service Adding an Internet-to-Phone Number service Beta Document Preliminary & Confidential Adding an Internet-to-Centrex/PBX Extension service Trunks tab Beta Document Preliminary & Confidential Location Settings tab Codecs tab Click the Codecs tab To change the codecs used by a dialing serviceDialing Exceptions tab Do not need to specify dialing exceptions Beta Document Preliminary & Confidential To import dialing exceptions Exporting and importing dialing exceptionsPermissions tab To set dialing service permissions An example of how to set dialing service permissionsBeta Document Preliminary & Confidential Following numbers are allowed Routing servicesHow you can use routing services An example of routing rules Processing phone numbers received from the Client Applying permissions in routing services Adding a routing serviceBeta Document Preliminary & Confidential Routing Rules tab Use this rule under the following conditions Add a new routing ruleExecute the following action Adding new routing variables Defining patterns to match the dialed digitsClick Add. The Routing Variable dialog box opens To add a routing variableClick Variables on the Routing Rules tab see Characters Digits placed in the new number Defining a new number for a routing rule1NxxNxxxxxx 16173540600 Nxx5-11 567891011 Page Handling Inbound Calls Route calls to an automatic call distribution ACD workgroup About call routingHandling Inbound Calls About auto attendants Using auto attendantsWhat callers hear Default Auto AttendantDescription Auto Attendants viewCreating a new auto attendant Setting up an auto attendantDescription. Information that describes the auto attendant Defining menu choicesTransfer to user User loginSend to voice mail Play messageKey To add or modify a menu choiceBeta Document Preliminary & Confidential Click the Advanced tab Menu choice Variable Name Variable Value These fields as followsScheduling transfers and greetings Action Action that will be performed To schedule transfers or greetingsBeta Document Preliminary & Confidential To set up hold music for an auto attendant Setting up hold musicDeleting auto attendants Auto Attendant dialog box, click the Hold tabAnalog trunk Routing calls directly to a userRobbed Bit T1 Span Internet spanRouting calls to workgroups Page Using Account Codes About account codes Setting general account code options Setting up account codesSetting a user’s account code modes To set a user’s account code modes Creating a text file of valid account codesFormatting the text file Using wild card charactersSetting general account code options on Using a verbal account code promptHow users enter account codes To use the verbal account code prompt instead of the beepIndicating the end of an account code Viewing account codes in the Call LogGenerating account code reports Monitoring & Backing UP About monitoring and backing up your Strata CS system Monitoring station activity Using the Device MonitorLogged Name of the user currently logged in at the station Monitoring trunk activityOut Enabling and disabling trunksStatus Do one of the following Restarting stations or trunksTo restart a station or trunk Starting a new Server log Using the Call LogAnswered By FromFrom Number To NumberSupervised transfer. a supervised transfer ResultMessage From DeviceDisplaying a specific number of Call Log entries Backing up Strata CS Monitoring database and disk usageExporting the Call Log To perform an offline backup of the Strata CS database To perform an online backup of the Strata CS databaseTo perform an offline backup of the Strata CS voice files Restoring Strata CS dataTo restore voice files from an offline backup To restore the Strata CS database from an online backupTo restore the Strata CS database from an offline backup Viewing the Windows Event Log Shutting down the Strata CS ServerMoving a Strata CS Server to another machine Strata CS-related Windows Event Log messages Error No Voice Resource Available Error Dssql ErrorDevice # Restarted Inbound call detected on outbound trunk #No loop current detected on outbound trunk n Error Strata CS Server RestartedInformational Started Strata CS Mail Server Error Error Failed to Stop Device Handle ##Error Unable to open device ## Error Unable to delete temporary message file for device ##Error Insufficient licenses ## T1 alarmsError Unable to start IVR Plugin License count exceeded Reporting problems Using the Maintenance Log viewProblem report package To e-mail a problem report package Using the Problem Report WizardTo report a Strata CS Server problem Reporting Strata CS Server problemsReporting a problem with a specific call or voice message Reporting distributed problems Reporting workstation application problemsTo report a workstation application problem To report a distributed problemCall record from the Call Log on the Server Page System Prompts System Prompts view About system promptsFile name TextControlling the prompt display Managing system promptsPlaying system prompts CommentImporting system prompt text Exporting system prompt textExporting and importing system prompt audio files Changing the encoding format of system promptsRecording options Recording system promptsAbout the sentence file About the .VAP and .VOX filesRecording process Recording system prompts professionallySelecting a voice American English .VAP and .VOX files are locatedProviding a script for the vendor Using the standard Strata CS voicesTesting the recorded prompts Recording over system prompts yourself Default location isDeploying the new prompts Recording over .VOX filesRecording over the .VAP file Testing the new promptsTo record over a prompt System Prompts view, double-click the prompt nameTo use the Sentence Tester Testing system prompts12-11 Localizing the telephone commands Configuring Internet Telephony Support Internet telephony requirements About IP telephony and Strata CSPlacing calls to H.323 terminals such as NetMeeting IP address Placing calls to Net Meeting from the Strata CS ClientPlacing calls to Net Meeting from a Strata CS phone Calling Strata CS from H.323 terminals such as Net Meeting Start NetMeeting Calling a Strata CS Server from Net MeetingCalling a Strata CS did number from Net Meeting Enhancing a Web page with a Call Us! button Using Windows 2000 Phone Dialer as an H.323 terminalPlacing calls involving a remote Strata CS Server Connecting two Servers using IP GatewaysOverview of creating an IP Gateway connection Using the IP Gateway Configuration WorksheetReceiving Internet calls from a remote Strata CS Server Codec use with IP Gateway connectionsCreating an IP Gateway Illustration of an IP GatewayIP Gateways view Creating an IP Gateway PasswordRemote Address RemoteAdd Comments to further identify the IP Gateway To set up an IP GatewayCalling Strata CS extensions on the remote Server Creating IP Gateway dialing services13-14 Placing phone calls through the remote Server Immediately connecting to dial tone on the remote ServerPlacing Centrex/PBX calls through the remote Server Creating Gateway users to unify two Strata CS Servers When you configure two Servers in this way, users canBefore creating IP Gateway users Dial any user’s extension directly, without an access codeOverview of IP Gateway users To create an IP Gateway user Using Contact PINs with IP Gateway users Fine-tuning your IP connectionExtending Strata CS About extending Strata CS Tapi applications In-band signaling applicationsExtending Strata CS with off-the-shelf applications Extending Strata CS with third-party devices Sending call type and extension number to a device Type of call Dtmf digits sent 14-7 Strata CS SDK To install the Strata CS SDK Installing the Strata CS SDKFollow the instructions in the Strata CS SDK Setup window Strata CS SDK Application Programming InterfacesDeveloping IVR Plug-ins with a telephony toolkit IVR Plug-in sample programsDevice Status sample program Device Status APIIVR Plug-in licensing Client API Strata CS Configuration Settings Strata CS Server registry settings About Strata CS configuration settings\Server\Settings\ EmptySentItemsFolder Default path is empty stringMail Default is 0 no time-outNumLogs Default is 10000 bytesTruncateRecordings Strata CS Workstation applications registry settingsString value specifying the user’s station ID Default is Current User SettingsString value specifying the user’s extension Default is \Client\Client\App Local Machine Settings\Client\TSP\Logon Locale definitions Strata CS Server language locale settingsStrata CS currently uses the following locale codes EnglishDefining custom tones Example Defining a disconnect detection tone Disabling Dialogic devicesCreate a string value under Settings named DisableDevices To disable Dialogic devices in the Windows NT/2000 registryTo connect a fractional T1 or E1 line to Strata CS Create the following key if it does not already existSave the changes to the registry Dialogic device namesDialogic voice board device names Board Board ID Channel Dialogic Internet telephony board device names Dialogic modular station interface MSI device namesVoiceBoard settings Dialogic voice board settingsMake interval for valid loop pulse detection Off-hook Delay. Period after off-hook, duringMinimum DTI Off. Minimum time required Between ring-received eventsVoiceBoard channel settings Dxchdtinitset Dword value for Dtmf detection edge select Default isDxchmfmode \Server\DTIBoardn\GlobalCall E1 and T1 board settings\Server\BRIBoardn\ISDN Isdn Megacom service settingsDefault is 1 Mdmf format MSI station board settingsDefault is 20 1000 milliseconds Default is 6 300 millisecondsLogging Using the Strata CS Settings programTo use TVSettings Viewing current values Changing key values Modifying other supported Strata CS settingsDefault value is 30 seconds Database\ConnectionTimeoutDefault value is Server\AllowGatewayUserLoginDefault value is 60000 milliseconds Default value is 180000 millisecondsDefault value is 1800 milliseconds Default value is 12000 millisecondsDefault value is 6000 milliseconds System\MinClientBuild Page Starting Strata CS from the command line Command Line OptionsPassword=password IP Gateway Configuration Worksheet To Server IP Gateway Configuration WorksheetName Type From Server Access To Server IP Gateway Page Using Quicknet and E-TEL with Strata CS Setting up Quicknet to dial Strata CS Using Quicknet hardware with Strata CSUsing Quicknet with Internet Switchboard Appendix D. Using Quicknet and E-TEL with Strata CS Using a Preferred address to dial extensions directly To make a Gateway preferred Setting up the Strata CS IP address as a Hot LineSetting up Quicknet to connect to Strata CS Creating the Gateway Beta Document Preliminary & Confidential Transferring and handling calls with a Quicknet phone Eliminating access code conflictsImportant note about Quicknet Hot Lines Calling a Quicknet card from Strata CSForwarding your calls to a Quicknet phone See , Configuring Internet Telephony Support in Strata CS Using the Strata CS Client with a Quicknet cardFor More Information Contacting QuicknetSetting up a FreeRide phone to connect to Strata CS Using an E-tel FreeRide IP phone with Strata CSClick Settings and Support My Phone Number, enter your Strata CS extension Beta Document Preliminary & Confidential Transferring and handling calls with a FreeRide phone Tel contact information Page Using Performance Counters Viewing performance counters in Windows NT/2000 Strata CS performance countersAppendix E. Using Performance Counters Beta Document Preliminary & Confidential Glossary Tor ActiveX Control Also called controlAutomatic Number Identification ANI Also called ANI Analog Trunk Also called analog lineApplication Programming Interface API Also called API Call Announcing Also called call screening, screening a call Business Communications Platform BCP Also called BCPCall Center Agent Also called agent Call Pursuit Also called follow me serviceCall Control Also called call handling Call Detail Recording CDR Also called call accounting, CDRCentral Office CO Also called CO Call Routing Also called routing a callChannel Service Unit CSU Also called CSU Channel Associated Signaling CAS Also called CASComputer Telephony CT Also called CT Competitive Local Exchange Carrier Clec Also called ClecComputer Telephone Integration CTI Also called CTI See also T-1 p. G-24 Dialed Number Identification Service Dnis Also called DnisDigital Trunk Also called digital line Digital Signal Processor Also called DSPDialogic SCBus Device Also called SCBus Dual Tone Multi-Frequency Dtmf Also called Dtmf Direct Inward Dial did Also called didFax-On-Demand Also called fax-back Grab-and-Hold Greeting Also called hold greeting Hold Audio Also called hold music Graphical User Interface Also called GUIInternet Protocol Also called IP Integrated Services Digital Network Isdn Also called IsdnRecognition ASR, IVR, speech recognition Local Exchange Carrier Also called ILEC, LEC Internet Service Provider Also called ISP, service providerPhony, Voice Over IP Modular Station Interface Also called MSI Microsoft Windows NT Server Also called NT ServerNetwork Interface Card Also called NIC Multi-Frequency Also called MFPersonal Information Number Also called contact PIN, PIN Plain Old Telephone Service Also called PotsParking a Call Also called call park Private Branch Exchange Also called PABX, PBX Public Switched Telephone Network Also called PstnPrimary Rate Interface Also called PRI Redundant Array of Inexpensive Disks Also called RAID Remote Access Server Also called RASRegional Bell Operating Company Also called Rboc Remote Office/Branch Office Also called RoboGLOSS-22 Strata CS Administrator Manual Small Office/Home Office Also called Soho Tapi Service Provider Also called TSP Telephony Application Programming Interface Also called Tapi Unified Messaging Also called integrated messaging GLOSS-27 Page Index To an auto attendant, 9-2to an IVR Plug-in,9-2 Types supported For caller IDDisabling Digital spansFolders, working with Follow me call forwarding, ??-6-27 Internet-to-Phone Number dialing service, adding Indicator, visual message waiting IntegratingUsing command line arguments, C-1 IP Gateways view, 2-5IP network Codecs forAdding Customizing trunk disconnect tones, A-12permissionsPermissions, dialing services Dialing timeouts, 4-12disk spaceAudio outpub over your computer speakers, 2-11audio output Shortcut menuStation ID Spanish language prompts, 4-4spans, digitalMoving, 6-42Operator Disconnect tones, customizing, A-12Did Converting, 12-3,12-4