Toshiba Release 4.0 manual Adding a digital Robbed Bit T1 span

5.In the Modify Action dialog box, select the Digit type to retrieve. You can retrieve DID, ANI, or filler digits.

nTo retrieve fixed-format data, click Exactly __ digits, and then type the number of digits to collect.

nTo retrieve variable-format data in which each piece of information may vary in length, and filler digits are used as separators, click

Variable up to the first ___ digit, and then type the separator character.

6.Click OK.

7.Repeat steps 4-6 to add all the actions required to collect digits coming in on the trunk.

8.Click OK.

After analog digit collection has been configured correctly, make sure that the trunk is configured to accept inbound calls and retrieve DID digits. Both these settings appear in the Trunks view and can be configured in the Trunks dialog box.

Adding a digital Robbed Bit T1 span ______________________

This section explains how to add a digital Robbed Bit T1 span by configuring signalling and adding the span to Strata CS in the Trunks view.

Configuring signaling using the Robbed Bit T1 Experimenter

Before you add a Robbed Bit T1 span in the Administrator, you must run the Strata CS Robbed Bit T1 Experimenter on the Strata CS Server computer to configure signaling on the T1 trunk. For information about installing and using the Experimenter, see Strata CS Installation & Maintenance Manual.

Adding the Robbed Bit T1 span in the Trunks view

After you configure signaling on the span correctly using the Robbed Bit T1

Experimenter, you can add the span in the Administrator.

CHAPTER 5. MANAGING TRUNKS AND SPANS 5-13

BETA DOCUMENT - PRELIMINARY & CONFIDENTIAL