Toshiba Release 4.0 manual Adding a digital Isdn BRI span

trunk numbers, so if you have not added them yet, leave room for them in your numbering of the span.

3.On the Tuning tab, optimize your ISDN settings as needed. See “Optimizing your ISDN settings” on page 5-19.

4.On the Trunks tab, set the default values for the 24 trunks that will be created in this span. You can then change these values for each trunk individually. See “Entering trunk defaults for a span” on page 5-16.

5.Click OK to add the span to your configuration.

Note: ANI/DNIS is automatically retrieved by Strata CS for these types of digital trunks.

Adding a digital ISDN BRI span __________________________

Use the following procedure to add a new ISDN Basic Rate Interface (BRI) span. To add Primary Rate Interface (PRI) spans, see “Adding a digital ISDN or CAS span” on page 5-17.

1.Choose Trunks > New Trunk > ISDN BRI Span. A new ISDN BRI Span dialog box opens

2.On the General tab, specify the following information for the span:

nBRI board number. The sequence number of the span.

5-18 STRATA CS ADMINISTRATOR MANUAL

BETA DOCUMENT - PRELIMINARY & CONFIDENTIAL