Toshiba Release 4.0 manual Placing Centrex/PBX calls through the remote Server

Gateway” on page 13-9. To create a new IP Gateway, click the IP

Gateway button.

nRemote Server’s Phone Number service access code. Enter the access code of a Phone Number dialing service on the remote Server (typically 9). This field specifies the dialing service that the remote Server uses to place calls originating from your local Server.

3.Enter all other information necessary to create the dialing service. For instructions, see “Adding an Internet-to-Phone Number service” on page 8-15.

4.Click OK on any tab to add the dialing service.

Users can now place outbound phone calls as if from the remote Server by dialing the access code plus the phone number, for example, 71-555-1212.

Note: If when dialing out an IP to Phone Number dialing service you have problems sending digits to external phone systems, try increasing the DTMF Gain and DTMF On-time parameters in your Internet span’s Tuning tab. See “Fine-tuning your IP connection” on page 5-24.

Placing Centrex/PBX calls through the remote Server

Use this type of dialing service to connect to a legacy PBX system on the remote Server, or dial a Centrex extension.

For this type of call, you must create an Internet-to-Centrex/PBX Extension dialing service, selecting the remote Server’s Centrex/PBX Extension dialing service.

13-16 STRATA CS ADMINISTRATOR MANUAL

BETA DOCUMENT - PRELIMINARY & CONFIDENTIAL