Toshiba Release 4.0 manual Dialogic device names, Dialogic voice board device names

5.Set the contents of DisableDevices to a comma-separated list of the device names you are disabling.

For example, to disable the third and fourth channels on the first voice board in a system, set the contents of DisableDevices as follows:

DXXXB1C3,DXXXB1C4

To disable all the channels on a board, set DisableDevices to the board name without any channel, for example:

DXXXB1

6.Save the changes to the registry.

Note: If you add or remove Dialogic boards, you must update the DisableDevices list.

Dialogic device names

Dialogic system software creates standard names for devices and channels within devices. These names are used to open the devices to receive device handles, which are used in all subsequent Dialogic driver functions.

Dialogic voice board device names

A Dialogic voice board device name has the form DXXXBnCn, where Bn is the board number and Cn is the channel number. For example, Channel 1 on Board 1 would be named DXXXB1C1. If multiple voice boards have been installed, the board number 1 is assigned to the Dialogic voice board that was installed in the Strata CS Server with the lowest board ID. (For information about setting Dialogic board IDs, see Strata CS Installation & Maintenance Manual.) The board number is then incremented by 1 for every four voice ports. The channel number is assigned sequentially starting with 1 each time the board number changes and incremented by 1 for each voice channel. Whenever all the devices on one Dialogic voice board have been named, the board-numbering sequence continues on the Dialogic voice board that was installed with the next lowest board ID.

APPENDIX A. STRATA CS CONFIGURATION SETTINGS A-15

BETA DOCUMENT - PRELIMINARY & CONFIDENTIAL