Toshiba Release 4.0 manual Using Quicknet with Internet Switchboard

3.On the Telephone Gateways screen, select your Strata CS Gateway.

If you have not created a Gateway yet, follow the instructions in the section, “Setting up Quicknet to dial Strata CS” on page D-2.

4.Check Hot Line.

5.Click Next to continue.

6.Click Next on the SpeedDials wizard screen.

7.Click Finish.

The IP address of Strata CS's Internet span is now set up as a Hot Line. Whenever you pick up the receiver of the phone attached to the Quicknet card, a call is automatically placed to Strata CS.

Using Quicknet with Internet Switchboard 4.0

Setting up Quicknet to connect to Strata CS

The following instructions explain how to create a Preferred Internet Switchboard Gateway that enables you to dial outbound calls as if you were sitting at a normal Strata CS station. You do not need to dial * and Strata CS's IP address, or the access code for the Gateway, in order to connect to Strata CS. As soon as you pick up the receiver of the Quicknet phone you can dial Strata CS extensions, dial access codes (such as 9) to place outbound calls through the Strata CS Server, log in to your account, and do anything else you could do from a remote station.

Whenever you place a call, the process of logging in to Strata CS is handled automatically behind the scenes, using your extension and password as you enter them in the following instructions.

D-6 STRATA CS ADMINISTRATOR MANUAL

BETA DOCUMENT - PRELIMINARY & CONFIDENTIAL