Toshiba Release 4.0 manual Beta Document Preliminary & Confidential

Administrator as follows: go to the Trunks view, right-click the Internet span, choose Open Span, and click the Codecs tab. The codec used by the span is displayed on that tab.

12.If the Strata CS Server uses VAD, then check Enable VAD. You can check whether the Strata CS Server uses VAD by using the Strata CS Administrator as described in step 11. The VAD option is on the Codecs tab.

13.Click the Dial Plan tab.

On the Dial plan tab you configure how the FreeRide phone responds to each initial digit you can press on it. To set up FreeRide as a Strata CS station, you must configure each digit to connect to the Strata CS Server’s IP address and log in using your extension and password. In the example above, when you pick up the FreeRide phone and dial 333, the dial plan reads the initial digit, 3, and connects to the Destination Address 10.11.12.7 (the Strata CS Server), then logs in using extension 208 and password 209, then dials extension 333 on the Server. All this occurs behind the scenes; the result is that you are connected immediately to extension 333.

14.Click Add or Edit to configure each digit between 0 and 9, and the # character. For each digit, do the following:

n Under Destination Address, enter the IP address of your Strata CS Server.

n Under Prefix Add, enter your Strata CS extension and password separated by the star character (*) as follows: *<extension>*<password>*.

n Specify a minimum and maximum length of the dial string as shown in the illustration above. For most digits, this will be the length of a Strata CS extension. For 0, specify a minimum and maximum length

APPENDIX D. USING QUICKNET AND E-TEL WITH STRATA CS D-15

BETA DOCUMENT - PRELIMINARY & CONFIDENTIAL