Using an E-tel FreeRide IP phone with Strata CS ____________

E-tel’s FreeRide phone connects to your PC and LAN and enables you to make or receive calls over the Internet or a private IP network. Using the FreeRide phone together with Strata CS’s Internet Telephony support, you can set up a remote Strata CS station that is connected to your Strata CS Server over TCP/IP. You can pick up the FreeRide phone and dial Strata CS extensions, dial access codes (such as 9) to place outbound calls through the Strata CS Server, log in to your account, and do anything else you could do from a normal Strata CS station.

For instructions on connecting a FreeRide phone and installing Configuration

Builder, please refer to your e-tel documentation.

To set up a FreeRide phone as a Strata CS station, you must make the following changes to the configuration of the FreeRide phone, using e-tel’s Configuration Builder software.

Setting up a FreeRide phone to connect to Strata CS

The following instructions describe how to configure a remote e-tel FreeRide phone to act as a Strata CS station.

1.Start e-tel’s Configuration Builder software.

Page 328
Image 328
Toshiba Release 4.0 Using an E-tel FreeRide IP phone with Strata CS, Setting up a FreeRide phone to connect to Strata CS