Pioneer DVH-P5900MP Resume playback Bookmark, Automatic playback of DVDs, CM skip/CM back

Operating this unit

Resume playback (Bookmark)

The Bookmark function lets you resume play- back from a selected scene the next time the disc is loaded.

To perform this function, set the remote con- trol to DVD mode.

!This function is available for DVD video.

%During playback, press BOOKMARK at the point you want to resume playback next time.

The selected scene will be bookmarked so that playback resumes from that point next time. You can bookmark up to five discs. After that, the oldest bookmark is replaced by the new

one.

# To clear the bookmark on a disc, press and

hold BOOKMARK during playback.

# You can also bookmark a disc by pressing and holding EJECT at the point you want to bookmark. Next time you load the disc, playback will resume from the bookmarked point. Note that you can only bookmark one disc using this method. To clear the bookmark on a disc, press EJECT.

Automatic playback of DVDs

When a DVD disc with DVD menu is inserted, this unit will cancel the DVD menu automati- cally and start playback from the first chapter of the first title.

!This function is available for DVD video.

!Some DVDs may not operate properly. If this function is not fully operated, turn this function off and start playback.

%Press AUTO PLAY to turn automatic playback on.

A.PLAY ON is displayed.

# To turn automatic playback off, press

AUTO PLAY again.

# When the automatic playback is on, you can- not operate repeating play of DVD disc (refer to Repeating play on the next page).

Section

03

CM skip/CM back

This function skips a reproduced image for a
specified time. If the currently playing disc	Operating
contains commercials, it is possible to skip
them.
% To skip progressively backward or for-
ward, press CM BACK or CM SKIP.	this
Each time you press CM BACK or CM SKIP it
changes steps in the following order:	unit
CM back
5 sec.—15 sec.—30 sec.—1.0 min.—2.0
min.—3.0 min.
CM skip
30 sec.—1.0 min.—1.5 min.—2.0 min.—3.0
min.—5.0 min.—10.0 min.
After displaying the selected option for two
seconds, reproduced image skips.
# If you do not operate the function within about
eight seconds, the display is automatically re-
turned.

Return to the specified scene

You can return to the specified scene where the DVD you are currently playing has been preprogrammed to return.

!This function is available for DVD video.

%Press RETURN to return to the specified

scene.

# If a specified scene has not been prepro- grammed in DVD disc, this function is not possi- ble.

Selecting the title list

When the separately sold display is connected to this unit, the listed information will appear on it.

En 23