Pioneer DVH-P5900MP Adjusting equalizer curves, Adjusting 7-band graphic equalizer

Operating this unit

Display	Equalizer curve
CUSTOM 1	Custom 1
CUSTOM 2	Custom 2
EQ FLAT	Flat
SUPER BASS (S-BASS)	Super bass

!CUSTOM 1 and CUSTOM 2 are adjusted equalizer curves that you create. Adjust- ments can be made with a 7-band graphic equalizer.

!When EQ FLAT is selected no supplement or correction is made to the sound. This is useful to check the effect of the equalizer curves by switching alternatively between EQ FLAT and a set equalizer curve.

%Press EQ to select the equalizer.

Press EQ repeatedly to switch between the fol- lowing equalizers:

POWERFUL (PWRFL)—NATURAL—VOCAL— CUSTOM 1—CUSTOM 2—EQ FLAT—

SUPER BASS (S-BASS)

Adjusting equalizer curves

The factory supplied equalizer curves, with the exception of EQ FLAT, can be adjusted to a fine degree (nuance control).

1Press AUDIO to select PWRFL. PWRFL appears in the display.

If the equalizer curve has been previously se- lected, the curve of that previously selected will be displayed instead of PWRFL.

2Press cor dto select an equalizer curve.

3Press aor bto adjust the equalizer curve.

Each press of aor bincreases or decreases the equalizer curve respectively.

Section

03

+6 to –4 (or –6) is displayed as the equalizer curve is increased or decreased.

# The actual range of the adjustments are differ-	Operatingthis
Adjusting 7-band graphic equalizer
ent depending on which equalizer curve is se-
lected.
# The equalizer curve with all frequencies set to
0 cannot be adjusted.
For CUSTOM 1 and CUSTOM 2 equalizer	unit
curves, you can adjust the level of each band.

!A separate CUSTOM 1 curve can be cre- ated for each source. If you make adjust- ments when a curve other than CUSTOM 2 is selected, the equalizer curve settings will be memorized in CUSTOM 1.

!A CUSTOM 2 curve can be created com- mon to all sources. If you make adjust- ments when the CUSTOM 2 curve is selected, the CUSTOM 2 curve will be up- dated.

1Recall the equalizer curve you want to adjust.

See Recalling equalizer curves on the previous page.

2Press AUDIO to select 7-band graphic equalizer adjustment.

Frequency and the level (e.g., 50HZ 0) appears in the display.

3Press cor dto select the equalizer band to adjust.

Each press of cor dselects equalizer bands in the following order: 50Hz—125Hz—315Hz—800Hz—2kHz— 5kHz—12.5kHz

4Press aor bto adjust the level of the equalizer band.

Each press of aor bincreases or decreases the level of the equalization band.

En 43