Pioneer DVH-P5900MP operation manual Additional Information Troubleshooting, Common

Appendix

Additional Information

Troubleshooting

Common

Symptom	Cause	Action (See)
Power doesn’t turn on.	Leads and connectors are incor-	Confirm once more that all connections are
The unit doesn’t operate.	rectly connected.	correct.
	The fuse is blown.	Rectify the reason for the fuse blowing, then
		replace the fuse. Be very sure to install the
		correct fuse with the same rating.
	Noise and other factors are causing	Turn the unit off and then on.
	the built-in microprocessor to oper-
	ate incorrectly.
Operation with the remote con-	The remote control operation mode	Switch to the correct remote control mode.
trol isn’t possible.	is incorrect.	(Page 13)
The unit does not operate cor-
	Battery power is low.	Load new battery. (Page 8)
rectly even when the appropriate
	Some operations are prohibited	Check by using another disc.
remote control buttons are
pressed.	with certain discs.
Playback is not possible.	The disc is dirty.	Clean disc. (Page 86)
	The loaded disc is a type this unit	Check what type the disc is.
	cannot play.
	Non compatible video system disc	Change to a disc compatible to your video
	is loaded.	system.
No sounds are heard.	Cables are not connected correctly.	Connect the cables correctly.
The volume level will not rise.
	The unit is performing still, slow mo-	There is no sound during still, slow motion or
	tion or frame-by-frame playback.	frame-by-frame playback.
The icon is displayed, and op-	The operation is prohibited for the	This operation is not possible.
eration is not possible.	disc.

Additional Information

The operation is not compatible with the disc’s organization.

This operation is not possible.

The picture stops (pauses) and	Reading of data has become impos-	After stopping playback once, start playback
the unit cannot be operated.	sible during playback.	once more.
There is no sound.	The volume level is low.	Adjust the volume level.
Volume level is low.
	The attenuator is on.	Turn the attenuator off.
There is audio and video skip-	The unit is not firmly secured.	Secure the unit firmly.
ping.
The picture is stretched, the as-	The aspect setting is incorrect for	Select the appropriate setting for your display.
pect is incorrect.	the display.	(Page 48)

When the ignition switch is turned ON (or turned to ACC), the motor sounds.

The unit is confirming whether a disc is loaded or not.

This is a normal operation.

En 81