Pioneer DVH-P5900MP operation manual Adjusting loudness, Using subwoofer output, Boosting the bass

Section

03 Operating this unit

+6 to –6 is displayed as the level is increased or decreased.

#You can then select another band and adjust the level.

5Press BAND to cancel the 7-band gra- phic equalizer adjustment.

Adjusting loudness

Loudness compensates for deficiencies in the low- and high-sound ranges at low volume.

1Press AUDIO to select LOUD.

2Press ato turn loudness on. Loudness level (e.g., LOUD MID) appears in

the display.

# To turn loudness off, press b.

3Press cor dto select a desired level. LOW (low)—MID (mid)—HIGH (high)

Adjusting subwoofer settings

When the subwoofer output is on, you can ad- just the cut-off frequency and the output level of the subwoofer.

1 Press SW to select 80HZ 0.

#You can also select the subwoofer setting menu by pressing AUDIO on the unit.

#When the subwoofer output is on, you can se- lect 80HZ 0 (subwoofer setting).

2Press cor dto select cut-off frequency. 50Hz—63Hz—80Hz—100Hz—125Hz

Only frequencies lower than those in the se- lected range are outputted from the subwoo- fer.

3Press aor bto adjust the output level of the subwoofer.

+6 to –24 is displayed as the level is increased or decreased.

Using subwoofer output

This unit is equipped with a subwoofer output which can be turned on or off.

1 Press AUDIO to select SUB.W.

#You can also select the subwoofer setting menu by pressing SW on the unit.

2Press ato turn subwoofer output on. SUB.W NOR appears in the display. Subwoo-

fer output is now on.

# If the subwoofer output phase has been set to

the reverse, SUB.W REV will be displayed.

# To turn subwoofer output off, press b.

3Press cor dto select the phase of sub- woofer output.

Press cto select reverse phase and REV ap- pears in the display. Press dto select normal phase and NOR appears in the display.

Boosting the bass

Bass boost function boosts the bass level of sound lower than 100 Hz. The more the bass level is increased, the more the bass sound is emphasized and the entire sound becomes powerful. When using this function with the subwoofer, the sound under the cut-off fre- quency is boosted.

1 Press AUDIO to select BASS.

#You can also select the bass boost setting by pressing and holding SW.

2 Press aor bto select a desired level.

0 to +6 is displayed as the level is increased or decreased.

44 En