Pioneer DVH-P5900MP Operating the DSP menu, AT EQ and TA Auto TA will be cancelled

Available accessories

Operating the DSP menu



1DSP display

Shows the DSP status.

2Subwoofer indicator

Shows when the subwoofer output is turned on.

%Press AUDIO to display the DSP func- tion names.

Press AUDIO repeatedly to switch between the following DSP functions:

FADER (balance adjustment)—POSI (position selector)—PLII (Dolby Pro Logic II)— music mode adjust—sound field control—Lo/Ro (down mix)—DRC (dynamic range control)— DIRECT (direct)—SLA (source level adjust-

ment)

# You can also use A.MENU button on the re-

mote control to select an audio menu.

# When the rear output setting is R-SP S/W, you cannot adjust front/rear speaker balance. Refer to Setting the rear output and subwoofer controller

on page 53.

# When playing discs recorded with more than 96 kHz sampling frequency, you cannot use audio functions. Also, equalizer curve setting, POSI,

AT EQ and TA AUTO TA will be cancelled.

# When playing discs recorded with more than 96 kHz sampling frequency, audio is outputted

from front speakers only.

# When both the center speaker and the rear speaker are set to OFF in the speaker setting, you

cannot switch to PLII.

# All audio functions are locked out when the di- rect control is on except VOLUME and PLII.

Section

04

# When you select MUSIC in the PLII, you can
select adjusting music mode.
# When playing other than the DVD disc, you
cannot switch to DRC.
# When selecting the FM as the source, you	Available
cannot switch to SLA.
# To return to the display of each source, press
BAND.	accessories
Note
If you do not operate the DSP function within
about 30 seconds, the display is automatically re-
turned to the source display.

Using balance adjustment

You can change the fader/balance setting so that it can provide you an ideal listening envir- onment in all occupied seats.

1 Press AUDIO to select FADER.

#If the balance setting has been previously ad- justed, BAL will be displayed.

2Press aor bto adjust front/rear speak- er balance.

Each press of aor bmoves the front/rear speaker balance towards the front or the rear. FADER F25 to FADER R25 is displayed as the front/rear speaker balance moves from front to

rear.

# FADER 0 is the proper setting when only two speakers are used.

3Press cor dto adjust left/right speaker balance.

When you press cor d, BAL 0 is displayed. Each press of cor dmoves the left/right speaker balance towards the left or the right. BAL L25 to BAL R25 is displayed as the left/ right speaker balance moves from left to right.

En 69