Pioneer DVH-P5900MP Selecting a chapter directly, Specifying title, Pausing DVD video playback

Section

03Operating this unit

#You can display the menu by pressing the MENU or TOP MENU while a disc is playing. Pressing either of these buttons again lets you start playback from the location selected from the menu. For details, refer to the instructions pro- vided with the disc.

#The way to display the menu differs depending on the disc.

3To perform fast forward or reverse,

press and hold mor n.

# If you continue pressing mor nfor five seconds, the icon mor nis highlighted. When this happens, fast reverse/fast forward con- tinues even if you release mor n. To resume

playback at a desired point, press f.

# Fast forward/fast reverse may not be possible at certain locations on some discs. If this hap-

pens, normal playback automatically resumes.

# There is no sound on fast forward or reverse.

4To skip back or forward to another chapter, press oor p.

Pressing pskips to the start of the next chapter. Pressing oonce skips to the start of the current chapter. Pressing again will skip to the previous chapter.

Chapter numbers are displayed for eight sec- onds.

5To stop playback, press g.

#When you stop DVD playback by pressing g, that location on the disc is memorized enabling playback from that point when you play the disc again.

#To resume playback, press f.

#If the remote control is set to DVH, gdoes not operate.

!You cannot operate this function by using NUMBER when the remote control is set to DVH mode.

%Press NUMBER corresponding to a de- sired title.

Title number is displayed for eight seconds and playback starts from the selected title.

!To select 3, press 3.

!To select 10, press 10 and 0 in that order.

!To select 23, press 10, 10 and 3 in that order.

Selecting a chapter directly

When using the remote control, you can select a chapter directly by entering the desired chapter number.

!To perform this function, set the remote control to DVH mode.

1 Press DIRECT.

Chapter number input display appears.

2Press NUMBER buttons to enter the de- sired chapter number.

!To select 3, press 3.

!To select 10, press 1 and 0 in order.

#You can cancel the input number by pressing

CLEAR.

3 Press DIRECT.

The chapter of entered number will play.

Note

After entering the number input mode, if you do not perform an operation within about eight sec- onds, the mode is automatically canceled.

Specifying title

To perform this function, set the remote con- trol to DVD mode.

Pausing DVD video playback

Pause lets you temporarily stop disc playback.

20 En