User Guide for the Polycom VVX 1500 D Phone

To place a conference call on hold:

>>During a conference call, tap the Hold soft key.

The other participants in the conference call are placed on hold. The Conference window is minimized and placed in the inactive call group.

To resume the conference call, tap the Resume soft key. To end the conference call and place all other conference call participants on hold, tap the Split soft key.

Ending Conference Calls

You can end a conference, and your connection to the other participants, by tapping the End Call soft key. When you tap the End Call soft key, the other participants remain connected.

Note

Conference call participants will not remain connected if they cannot handle calls

 

using the same protocol.

 

 

To end a conference call:

>>During a conference call, tap the End Call soft key. The other parties remain connected.

Splitting Conference Calls into Two Calls on Hold

When a conference is established, a Split soft key is available. When you split a conference, you end the conference and place all parties on hold. The Split soft key is available during conference calls, and when a conference call is on hold.

To split a conference call:

>>During a conference call, tap the Split soft key. (If a conference call is on hold, tap the conference call window, and then tap the Split soft key.)

The conference ends, and all calls are split into individual calls and placed on hold.

Managing Conference Call Participants

When you manage conference call participants, you can do the following:

Mute a participant.

Place a participant on hold.

Remove a participant from the conference.

3 - 24

Page 134
Image 134
Polycom 1725-16824-001 manual Ending Conference Calls, Splitting Conference Calls into Two Calls on Hold