Polycom 1725-16824-001 manual Attaching Ferrite Clamps, Connecting Network and Power Sources

Getting Started with Your Phone

Attaching Ferrite Clamps

Your phone package includes two ferrite clamps. You must attach a ferrite clamp to the network cable and to the computer cable (if you are connecting a computer to your phone) before you attach the cables to your phone.

To attach a ferrite clamp to the network cable or PC cable:

>>Clamp a ferrite clamp around the cable.

Connecting Network and Power Sources

Note	Before you connect the network cable to your phone, make sure you attach a ferrite
	clamp to the cable (see Attaching Ferrite Clamps, above).

There are two ways to connect your phone to the network and a power source. Your system administrator will advise you which method to use. (If your phone is already connected to the network and a power source, go directly to Connecting the Handset and Handset Cord on page 1-8.)

You can use one of the following methods:

•Connecting the Phone Using a Power Over Ethernet Source

•Connecting the Phone Using AC Power

1 - 5