Polycom 1725-16824-001 manual Feature altogether

Customizing Your Phone

	Updating User Detection Settings
	You can specify how sensitive the camera should be at detecting motion. If the
	camera detects motion (for example, if you are near the phone), your phone
	will not initiate power-saving mode, even if an idle timeout has been reached.
	If the camera detects motion, power-saving mode will terminate and the idle
	screen will display. If the camera sensitivity is high (five or higher), the phone
	will display the idle screen when you are near the phone. If the camera
	sensitivity is low (between one and four), you will have to wave your hand at
	the camera for the idle screen to display. By default, camera sensitivity is set
	higher during office hours. If you want, you can disable the user detection
	feature altogether.
Note
	The camera will detect any source of motion in front of it, not just a person or people
	nearby. For example, the camera will detect flying objects or rapidly-changing light
	conditions. Therefore, even if you are away from the phone, your phone may detect
	other sources of motion, and won’t initiate power-saving mode.
	In addition, since your phone’s camera detects motion, if you close the camera
	shutter, point the camera at the ceiling, or set the camera sensitivity to 0, the phone
	will not detect your presence (even if you are nearby).

To update user detection settings:

1.Tap > Settings > Basic > Power Saving > User Detection. The User Detection screen displays.

2 - 41