Polycom 1725-16824-001 manual Setting Up the Phone, Adjusting the Stand

Getting Started with Your Phone

Setting Up the Phone

To set up the phone, do the following:

1.Adjust the stand. See Adjusting the Stand, below.

2.Connect the ferrite clamps to the network cable (and to the optional computer cable, if you are connecting a computer to your phone). See Attaching Ferrite Clamps on page 1-5.

3.Connect the phone to the network and a power source. See Connecting Network and Power Sources on page 1-5.

4.Connect phone components. See Connecting the Handset and Handset Cord on page 1-8and Connecting Optional Components on page 1-8.

5.Adjust the screen and camera. See Adjusting the Screen on page 1-12and Adjusting the Camera on page 1-13.

Adjusting the Stand

Your phone is shipped with the stand positioned flat against the phone. To use the phone, adjust the stand so that the phone is in a more upright position.

You can adjust the stand to one of five positions. The lowest position is labeled MIN, and the highest position is labeled MAX.

The following figure shows the MIN and MAX labels for the stand.

1 - 3