Setting Up a Screen Saver

Note	Adding a screen saver to your phone is an optional feature and may not be
	supported on your system. For more information, see your system administrator.
Note

	You may want to view your pictures like a slide show (or just view one picture)
	without setting up a screen saver that automatically starts each time your phone is
	idle a certain amount of time. This is the Picture Frame feature. For more
	information, see Displaying the Pictures that are on Your USB Flash Drive on page
	2-14.

	You can set up a screen saver to display the pictures stored on a USB flash
	drive. The screen saver will automatically start each time your phone is idle a
	certain amount of time. You can stop the screen saver at any time and return
	to the idle screen by tapping the touch screen. If your phone is idle again (for
	a specified period of time), the screen saver will start again.
	To set up a screen saver of your pictures, you need to set up certain screen
	saver settings, place your pictures on a USB flash drive, and attach the
	USB flash drive to the phone. The phone can only display the screen saver
	when the USB flash drive is attached to the phone.

	For a list of supported USB flash drives, see Technical Bulletin 38084,
	Supported USB Devices for SoundPoint IP 650 and 670 and Polycom VVX 1500
	Phones, at
	http://www.polycom.com/support/voice/soundpoint_ip/VoIP_Technical_Bulletins_pu
	b.html.

	For information on stopping and disabling a screen saver, see Stopping and
	Disabling a Screen Saver on page 2-13.

To set up a screen saver of your pictures:

1.Place one or more pictures on a USB flash drive, either in the root directory or in a folder.

The pictures must have the following file type and size: File type: BMP, JPEG, or PNG

Maximum size: 9999 x 9999 pixels

Note	The phone will not display images that have a progressive JPEG, .JPE, or .JFIF
	format.

2 - 10

Polycom 1725-16824-001 manual Setting Up a Screen Saver