External SIP Peer Device Management
Polycom, Inc. 109
Free Form Template Variables In the Template fields on the Postliminary tab, and when specifying a
Request-URI or other headers for outbound registration (see “Add Outbound
Registration Dialog Box” on page112), you can use the variables in the table
below entered as
#variable name#
(case insensitive). The system replaces the
variables with the corresponding values as shown below.
You can also use these variables (without # delimiters) in a customized script.
In addition to the variables, you can enter any values acceptable for the
Request-URI or To header.
For the Request-URI, the contents of the Template field specify only the URI
portion of the full Request line. Depending on network configuration, a route
header may be required.
For the To header, the contents of the Template field specify the complete
header except for the header name (“To”).
The @ symbol is always removed if no user is present in the result.
Table 5-16 Variables for use in SIP Peer Postliminary Template fields
Variabl e Description
otdisplay Original To header's display name.
otuser User portion of the original request's To header URL field.
othost Host/IP portion of the original request's To header URL field.
otscheme Original To header's URL scheme (sip, sips, tel).
phost Peer's configured IP/FQDN (next hop address).
pscheme Peer's configured scheme based on transport (sip, sips).
oruser User portion of the original request's Request-URL field.
orhost Host/IP portion of the original request's Request-URL field.
orscheme Original request's URL scheme.
pnetORhost Destination network parameter if specified, otherwise the peer's
configured IP/FQDN.
pport The port specified for this SIP peer.
ptransport The transport type specified for this SIP peer.