Polycom DMA 7000 System Juniper Networks SRC Integration

Juniper Networks SRC Integration Integrations with Other Systems

Polycom, Inc. 173

4When asked to confirm that you want to join, click Yes.

The system connects to the Polycom RealPresence Resource Manager or

CMA system, establishes the integration, and obtains site topology and

user-to-device association data (this may take a few minutes). A dialog

box informs you when the process is complete.

5On the Resource Management System page, verify the integration

information.

6Go to Network > Site Topology > Sites, and from there to the other site

topology pages, to see the site topology information obtained from the

Polycom RealPresence Resource Manager or CMA system.

To terminate the integration with a resource management system

1Go to Admin > Integrations > Resource Management System.

2In the Actions list, select Leave Resource Management System.

3When asked to confirm that you want to leave, click Yes.

The system connects to the Polycom RealPresence Resource Manager or

CMA system and terminates the integration. A dialog box informs you

when the process is complete.

4On the Resource Management System page, verify that the system is no

longer integrated with the Polycom RealPresence Resource Manager or

CMA system.

The Polycom DMA system retains the site topology and user-to-device

association information last obtained from the RealPresence Resource

Manager or CMA system, but it’s now editable.