Site Links Site Topology
Polycom, Inc. 279
The Site Links page contains a list of the links defined in the site topology. A
link can connect two sites, or it can connect a site to an MPLS network cloud
(see “Network Clouds” on page285). Links between sites must be configured
in order to enable calls between si tes. In order for an endpoint in si te A to call
an endpoint in site B, there must be a link path (either direct, via other linked
sites, or via an MPLS network cloud) connecting site A and site B.
If the system is integrated with a Polycom RealPresence Resource Manager or
CMA system, it receives this information from that system, and this page is
read-only. If not, you can enter link information.
The commands in the Actions list let you add a link and edit or delete existing
links.
The following table describes the fields in the list.
See also:
“About Site Topology” on page 263
“Add Site Link Dialog Box” on page 279
“Edit Site Link Dialog Box” on page280
“Site Topology Configuration Procedures” on page287
Add Site Link Dialog Box
Lets you define a new site link in the Polycom DMA system’s site topology. A
link can connect two sites, or it can connect a site to an MPLS network cloud
(see “Network Clouds” on page285).
The following table describes the fields in the dialog box.
Table 11-7 Information in the Site Links list
Column Description
Name Name of the link.
Description Description of the link.
From Site The originating site of the link.
To Site The destination site (or MPLS cloud) of the link.
Max Bandwidth (Mbps) The total bandwidth limit for voice and video calls, which
you set at the gateway or router.
Max Bit Rate (kbps) The per-call bit rate limit for voice and video calls, which
you set at the gateway or router.